Latest railway spares Tenders | Government railway spares Tenders

Central Government/Public Sector

CTN :40511812

18 Jun, 2025 NA

Bhusawal - Maharashtra

Tender For supply of end axle boxe with plain end cover with bearing for wap-1 & wap4 locos as pe r nei drg no.x-122 rev-k comprising of part no.1 to 11,11a & 12 to 22 (total 23 parts in one axle box) or fag drg.no. 901-26-101 000 ver.aa. compring of part no. 1 to 7 9,10,11,11a & 12 to 16, 18, 20, 21, 22 & 25 (total 21 parts in one axsle box).and spring seat coller height sho uld be 17mm as per rdso modification sheet no.mp.mod.vl.01.03.05 (rev.00). [ warranty perio d: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500396

09 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of rear cover for axle box [finished machined ]

CTN :40500483

23 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of set of axle box complete without roller bearing for wag 9/ wap 7 locomotives, as per c lw's specification no: clw/ms/3/003 alt. 5 - one set consists of the following items: (1) axle box com plete with earth contacts- except item no 7 & 16 to clw's drg no. 1209.01.111.005 alt. 3 ref. no: 1 t o 6, 8 to 15 & 17 only. qty 04 nos/set. (2) axle box complete with hasler transmitter - except item no 7 &13 to clw's drg no: 1209.01.111.006 alt. 2 ref. no: 1 to 6, 8 to 12 & 14 to 16 only. qty 01 no/set. (3) axle box complete with blank cover, except item no 7 as per clw's drg no: 1209.01.111.007 alt. 3, ref no: 1 to 6, 8 to 17 only qty 07 nos/set. [ warranty period: 30 months after the date of deliver y ]

CTN :40509348

30 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of axle box front cover for speedometer fixing in motor coach bogie as per drawi ng no. icf/sk-0-2-131 alt-"j" . [ warranty period: 30 months after the date of delivery ]

CTN :40485288

23 Jun, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For set of axle box complete w/o bearing for wap7 loco (03 items 03 nos) compri singaxle boxes with earth contact cover, hasler transmitter & blank cover to specn. n o.clw/ms/3/003 alt-4 & drg no 1209.01.111.005, 006 & 007 alt-2, assly paste supply molykote 10 00 instead of klubber nb 50. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40475399

23 Jun, 2025 NA

Barauni - Bihar

Tender For supply of axle box cover high tensile bolt ( 10.9 grade , pitch 2 mm) m16 x 50 mm [ warrant y period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40475431

02 Jun, 2025 NA

Bongaigaon - Assam

Tender For supply of axle box rear cover (aluminium) for coaching stock " drawing no: t-0-2-603/2, alt- g/14 m aterial spec: as per drawing with latest revision and amendments and icf/md/spec-370, issue status:01 , rev-0 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40435508

30 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of gasket for end cover for axle box 1.5 mm thick asbestos, drg.no.jhs/trs/3/sk-317 & is : 2712 - 79.gr.-a/01 as per drg.no. specn. -------- [ warranty period: 30 months after the date of delivery ]

CTN :40437644

29 Jul, 2025 NA

Delhi - Delhi

Tender For procurement of spares for il-78 aircraft - flow meter 510, needle valve 502, pressure relief valve 504, filter element 5 absolute, air pressure regulator 527, pressure reducer valve 503, air pressure gauge 531, pressure gauge 517, pressure gauge 516, pressure gauge 539, pressure gauge 532, pressure gauge 537, pneumatic control valve, auto/manual switch, pneumatic controller, fuel disconnect, filter, module, o-ring, relay, diode, face-seal mating, relay, iso chain, l=61.25 (102 pitches), washer, shoulder ring, screw cap, setscrew (opt to item 90), bushing teflon, seal and retainer s/a, retainer-seal and bearing, washer thrust, seal, plain encased, washer (order nha item 6), rail, washer, flat, screw, screw, cap, socket head, .1380-32 thd x .750 lg, housing assembly, tensioning screw, bracket, chain wheel, axle, washer, name plate, subassy, switch (s3) attaching parts, box assembly, connector circ. mount, switch subassy (s4) attaching parts, cylinder, piston, end cap, oil, end cap, air, end cup, nameplate, block assembly, body (part of item 16.1), spool and sleeve assembly, sleeve, spool and sleeve assembly, spool, gear, worm attaching parts, plug, pin, cover attaching parts, sleeve, plate, cover attaching part, needle, valve, assembly, plate, cover attaching parts, it is a sub-assembly of hydra ulic flow regulator, label, cap-port s/a, plate cam, name plate, name plate, sleeve, cover, body, shaft, splined, body, assembly, cam and piston s/a, piston and shoe s/a, bearing barrel, barrel-cylinder, mounting flange s/a, pin-cam index, front housing s/a, shaft and bearing s/a, collar-hold down, shaft- internal drive, bushing- spline, spring-helical compression, plate- hold down, spacer, bushing, cup (order nha item-6), actuator assy, shaft assy, switch assy (s2) attaching parts, body, motor, machined, cam, cam, shaft, plug, cover, motor attaching parts, hex attaching parts, cover, cover attaching parts, cover attaching parts, tube, shaft, splined, plate, switch, stand off attaching parts, spacer, stand off, gasket, terminal (96736 scd 99-1008-3), terminal (96736 scd 99-1008-2), box assy, box assembly, worm, machined, module, connector attaching parts, receptacle, it is a sub-assembly of light control box, switch, micro, relay,2 pdt,type i attaching parts, pin, straight, 0937 dia attaching parts, relay, screw-socket head cap (ap), washer, wave (96736 scd 99-1011-2), spool and piston subassembly, spool; compensator(matched set order nha item-290), piston, stroking, piston, rate, barrel cylinder, piston, blocking 9matched set order nha), port cap, bearing, cylinder barrel, elbow, flange- mounting, packing, perfor med

CTN :40289846

30 May, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - nut (a1-1-15) , nut m18 plain(jcb super plate xxx i ac) , bolt m18x90(jcb super xxx i ac) , joint water outlet (44tc plate-w) , radiator bottom hose(jcb super xxvii b-17) , de spanner 27x32(jcb super, plate- v11 d) , strut gas door(plate-iv j-1) , tail lamp left side(item no-906) , door seal right hand (jcb super page 95) , fuel pipe fuel filter to fuel pump(ms-174) , fuel pipe feed pump to fuel filter(ms-175) , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , hose assy suction(item no - 1202) , light hand lamp 12v , element fuel sediment filter(u v-2162) , bulk head hose(plate-xiii j-2) , secondary element(ispl sl-1904) , gasket for cyl head thickness 1.25(ms-156) , motor wiper linkage assy(plate-1x g-1) , injector assy(vs turbocharged engine)(ms -171) , hose 3 by 4 inch bsp usp 2150mm(plate-xxxi aa-15) , set piston ring 0.50 o s , header for cooler and filter( ms-177) , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , tools kit (set of 41items) , bonded washer seal, 1 by 2 inch bsp , bolt plough 3 by 4 inch unf x 23 by 4 inch bs311 type-9(sl-60) , cab base mounting , repair kit , oil seal(ms-183) , pin pivot( ms sl no-4) , hose 1 by 4 inch x 1 by 4 inch bspx520 long , bearing linner( ms-20) , filter engine oil , element suction(jcb 3dx plate b1-2-1 sl no 4) , wiper arm(ms-80) , lock handle with key(ms sl-51) , seal kit (ispl sl no 1513) , filter element , gaiter gear lever , light rear combination lh tail lamp lh (c1-3-11) , element fuel filter 30micron(sl no-xxx c-8) , leaver tipping (plate-vi t-1) , brake piston , seal rear( ms sl no-131e) , bush , plate pressure clutch 6.0mm (ms sl no-212) , seal , kit spider 106.4x43.9 dia(plate-f3-1-1) , rod seal , seal(ms sl-33) , brush carrier assy(ms-192) , v-belt (b-57) , throttle lever & control assy(jcb ispl sl no 806) , seal kit(ms-126) , lead bty positive ( ms sl no- 65) , seal shaft(ms sl no-131g) , brake shoe(ms-187) , thermosted abi(item no-2491) , bearing (h1-1-1 by 13) , filter assy , pressure hose(escou) , fuel maint filter 5 micron jcb 3dx super) , injector(item no-2526) , plate brake counter(ms sl no-144a) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , kit spider(jcb f1-6-10) , filter fuel assy.(item no-2132) , grease bucket pump , propshaft (p92)(price list-51883) , valve solenoid assembly(ctlg 3dx f5-1-1) , king post carriage(item no-647) , boom assy (jcb 3dx u v) plate b4-4-1 , drive head (item no-1536) , axle steer drive(item no-1521) , decal panel , dowel , spring(ms sl-64) , bolt banjo , rubber hose(plate-l1-4-10) , brush spring(ms-191) , seal,filter cap ( plate no- b1-3-2, sl no- 6a) , horn 12v (plate-c1-12-2) , bty cover (ms-67, jcb u v) , sealing ring ce(ms-190) , relay f r (ms sl-140) , cleaner active wiper(iv r-12,383) , adhesive(iv,r-10) , rh handle , jug oil 200cc , fan belt xpa1280(ispl 4r1040t sl-1 p-79) , oil seal hsg (plate-2h096) , feed pump (side opening)(ms -170) , cable assy throttle controll(ms-96(a)) , water pump assy , pump oil (f5-1-1 e jcb) , roof moulding(plate-iv e-1) , set piston ring 0.75 o s , fuel injection pump vs mico(ms-169) , alternator 12v 65amp(ms-197) , pump hydraulic(jcb super) , radiator aluminium (plate-xxxiii) , backhoe bucket 21 inch wide (ispl plate-k04) , clutch assy , rear axle assy 30 kph , seal kit(ms sl-62) , ignition switch (ispl escou sl no 637) , pressure plate(ms sl-429) , hose suction main hydraulic pump(e2-1-1) , hose , hose 1 by 2 inch x 1 by 2 inch bspx660mm long str , hose(plate-e1-2-1 by 13) , thermostat element(ms-164) , solenoid switch(ms-181) , pivot pin alloy steel(ms sl-18) , fuel filter , lead bty negative (jcb 3dx (u v) ms ser no 66) , rocker arm adjusting screw(ms sl-539) , link track rod (plate-f1-3010) , engine fan-21(jcb super) , alternator(item no-75) , grease bucket pump , kit seal main hyd pump(plate-e2-2-1) , drive assy(4r1040t starter page 70) , armature assy(ms-196) ,

Railway Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector