Latest rebar Tenders | Government rebar Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

State Government

CTN :45669553

14 Jul, 2026 NA

Anuppur - Madhya Pradesh

Tender For regarding purchase of building materials for the year 2026-27 under forest division anuppur- cement p.p.c. (50 kg) , cement o.p.c. (50 kg) 43 grade, , ballast 08 m.m., , ballast 10 mm., , ballast 12 mm., , ballast 20 mm., , ballast 40 mm., , ballast 60 mm., , ballast 90 mm., , iron rebar (rod) 06 mm. t.m.t., , iron rebar (rods) 08 mm. t.m.t., , iron rebar (rods) 10 mm. t.m.t., , iron rebar (rods) 12 mm. t.m.t., , iron rebar (rods) 16 mm. t.m.t., , sand (clean river sand, red, obtained from river) standard unit high quality per sq.m., , red brick 9"x4"x3" (chimneys a-graded, fully baked in bhaga should be standard unit per nag)., , fly s brick (standard unit high quality), , stone dust, cumin ballast (standard unit high quality), , hard murum (standard unit high quality), , t.m.t. widing wire 18 gauge

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

State Government

CTN :45690582

15 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of glassware items - beaker , beaker , boiling tube class a , boropure cellulose nitrate membrane , bottle top dispensers , bulb pipettes class a , bulb pipettes class a , bulb pipettes class a , bulb pipettes class a , china dishes , conical flask , cover glass , crystallizing dishes , drying trays , erlenmeyer conical flask , filter paper whatman grade 1 , flat bottom evaporating dishes , flat bottom evaporating dishes , flat bottom flask , glass dishes , glass filter funnel , glass mortar and pestle , glass rods , magnetic stirrer bar , magnetic stirrer bar , magnetic stirrer bar , measuring cylinder class a , measuring cylinder class a , measuring cylinder class a , measuring cylinder class a , measuring cylinder class a , microscope glass slides , pipette graduated class a , pipette graduated class a , pipette graduated class a , pipette controller , pyknometer class a , reagent bottles wide mouth , reagent bottles with glass stopper , reagent bottles with glass stopper , reagent bottles with glass stopper , round bottom flask , s line petri dishes , separating funnel , pear shape , single channel variable vol pipette , spare extractor 100ml , specific gravity bottle , test tubes , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , test tubes with stopper class a , variable micropipette , variable micropipette , variable micropipette , viscometer college pattern , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , volumetric flask class a , watch glasses , beaker 1000ml , beaker 250ml , beaker 500ml , burette with staright bore glass key stopocok 25ml , burette with staright bore glass key stopocok 50ml , capillary tubes tlc 100mm , chemical thermometer , co-agulated tube melting point tube , college pattern center support pack of02 , concave lens , concave mirror , convex lens , cover slip , crystallizing dish with spout , distillation apparatus , dropping bottle 125ml , dropping bottle 125ml 12 pk , flask flat bottom single neck 250ml , flask volumetric 100ml , flas volumetric 50ml , flas volumetric250ml , flask flat bottom single neck cap 100ml , flask round bottom single neck cap 250ml , flask volumetric 500ml , flassk round bottom single neck cap 100ml , gas genearator kipps with ground glass joint 500ml , glass desiccators plain 210mm , glass dropper 6 , glass rod , glass stopper size 19 , graduated cylinder 100ml , graduated cylinder 10ml , magnifying glass with led , measuring cylinder 50ml , measuring cylinder 100ml , measuring cylinder 10ml , measuring cylinder 250ml , measuring cylinder 500ml , melting point tube , micro scale ocular micrometer , micro slide , micro slide , micro slide , optical prism , ostwald standdard size viscometers , ostwald viscometer , petridishes plain , petridishes plain , pipette , pipette , pipette , reagent bottle , reagent bottle , reagent bottle , reagent bottle , reagent sprayer for tlc 100ml , separating funnel 100ml , separating funnel 125ml , separating funnel 250ml , soxhlet extraction appratus 200ml , stopper hollow hexagonal head con size , test tube with rim 15ml , test tube 15ml , thermometer , thermometerchemical , thiele tube pack of 06 , thieles tube , volumetric flask 50ml with stoper , volumetric flask , volumetric flask , watch glasses , weighing bbottle tall form cap 60ml

State Government

CTN :45671572

30 Jun, 2026 NA

Morena - Madhya Pradesh

Tender For procurement of miscellaneous items - materials required for departmental construction work, iron (rebar) (isi marked) 6mm, 8mm (thermo-mechanically treated [tmt]), iron (rebar) (isi marked) 10mm, 12mm (thermo-mechanically treated [tmt]), iron (rebar) (isi marked) 16mm (thermo-mechanically treated [tmt]), cement (isi standard) 50 kg bag, major plant (acc, ultratech, ambuja, birla, jk, dalmia, etc.) – grade 43, grade 53, stone boulders (khanda) 8x8 inch / 18-20 cm coarse aggregate, black crushed stone (aggregate): 6mm to 12mm, crusher dust, brick (chimney-fired), size 9"x4"x3"; water absorption not to exceed 25% and crushing strength not less than 20%, flooring and wall tiles (vitrified/ceramic/glazed); thickness 2.0mm; water absorption not to exceed 0.05%; conforming to is:15622; all colors/shades/finishes, black crushed stone: 20mm to 40mm, red murrum (coarse grade), window/door frames (sal/beeja/saku wood), window/door shutters (veneered flat-pressed three-layer graded wood particle board); conforming to is:3097 grade-1, aluminum window sliding tracks (glass and mesh fittings; 5mm glass thickness), door frame, प्रम 100 उुग 50 उुग 1.6 उु चत्वपिसम ब्व व 1.6 उु जीपबा पेदहस्म तमिंजम पा 4351 उदनाम्बिजन्तमक तिवु ब्वुुमत्पंस उपसक जम्मस सेम्मज़्ष, श्ल्प चप्चम 32 उु क्प लंस अंद्प्रमक प्तवद चप्चम पप दंता, chamat pai 1239 mpv jeep badamme 2.8 mph, श्ल्प चप्चम 65 उु क्प लंस अंद्प्रमक प्तवद चप्चम पप दंता, chamat pai 1239 mpv jeep badamme 2.8 mph, भच्चम चप्चम प्रम् 50 वु क्प प्प डप्पडपुनू जीपबदमे 3 वु, प्पतम प्रप्रम 4.0 वुन्यु उनस्जपेजतंदक सिंज बिन्सम 3 वत्मम विचिचमत पुतम्, kota stone 20 mm 40 mm, granite 20mm thick, marvel 20mm thick, fan-shaped concrete paver block, 60 mm thick, fan-shaped concrete paver block, 80 mm thick, centering and shuttering (rental), binding wire (gi wire), acrylic distemper (isi marked), plastic emulsion paint (isi marked), oil-bound distemper (isi marked), cement primer (isi marked), oil paint (isi marked), wall putty (isi marked), pvc hd pipe, 0.5" & 1" (isi marked), pvc hd pipe, 1.5" (isi marked), pvc hd pipe, 4" (isi marked), pvc hd valve, 0.5", 1", & 1.5" (isi marked), pvc socket, 4" (isi marked), pvc hd elbow, 0.5" (isi marked), pvc hd elbow, 1" & 1.5" (isi marked), pvc hd elbow, 4" (isi marked), brass valve, 0.5" & 1" (isi marked), gi elbow, 0.5" & 1" (isi marked), gi socket 0.5a 1 padb (pap mark), steel spout 0.5 pdb (papp mark), long nose tape 0.5 pb (pap mark), मैजमट्ड ब्वुवक्म प्रम 360 गुग्475 गुग्395 वु.जप.हमतु थसन्वत्व चिस्लुमत विन्जमक उन्जमत बस्वेमज मन्त्वचमंद जल्चम अंबंध प्रम प्रूपजी व्सपक चविसल चत्विचमसल्दम उक्म वेजी बस्वेम् मंज वामत, ग्रेनी इप्डम फ्रैम 570 गी 470 गी 190 गी पुजी संस पिजजपड़ा दक्जनत्मे, pvc water tank 3 layer(pap mark), light fitting copper wire (1mm, 1.5mm), light fitting copper wire (2.5mm), light fitting copper wire (4mm), 3 pin socket 6.dutch (pap mark), 5 pin socket 6.dutch (pap mark), switch 6.dutch (papp mark), indicator light (pap mark), fan regulator (pap mark), power plug 16.dutch (papp mark), switch 16.dutch (papp mark), fuse socket(pap mark), holder (pap mark), sealing rose (pap mark), mcb (pap mark), main switch (papp mark), pvc board 8mm x 4mm x 12mm x 4mm x 4mm pvc casing (isi mark), ceiling fan 48-inch (isi mark), tube light complete 20 watt (isi mark), led bulb 10 watt (isi mark), led 15 watt (isi mark), iron pipe 2x2 inch, iron pipe 1.5x1.5 inch, iron pipe 2x3 inch, profile sheet 0.4 mm, fertile soil, water tanker supply (capacity 5000 liters)

corporations/Associations/Others

CTN :45668503

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of scrap tmt rebar

corporations/Associations/Others

CTN :45668530

29 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of scrap tmt rebar lot 1,scrap tmt rebar lot 2

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

CTN :45648793

02 Jul, 2026 NA

Agra - Uttar Pradesh

Tender For supply of mild steel round rod 16mm , brass rod free cutting round hexagonal af 19mm , stainless steel spring wire 1 point 6 , steel ball 11 point 10 mm dia round , steel bar carbon finished bright round 80mm dia , steel spring wire 12 swg , oxidising salt black , polythene moldng powder hd black , potassium cyanide for industry use , nitrile rubber compound nt2 irhd 45 to 50

CTN :45628776

22 Jun, 2026 42.78 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to goi press colony gpra qtrs at mayapuri new delhi during 2026-27 sh-supply of painting material for external finishing- anti-termite pesticides -(imidacloprid) , cement opc/ppc, , cement - white, , admixture for concrete, , reinforcement steel (thermo-mechanically treated bars (fe 550 d), , alccofine, , mechanical couplers for reinforcement, , ready mix cement concrete, , architecture expansion/seismic joint system, , expansion filler board premoulded compressible (non bituminous), , concrete curing compound, , core cutting, , expanded polystyrene sheet (eps), , soil anchor for diaphragm wall, , pvc water stop, , ready mix polymer jointing cement mortar, , glass brick/glass block, , all type of door lock, floor spring, door closer including mortice locks, , customised door window hardware /joinery fittings, , flush door shutter, , aluminium, , façade and window system, , fire stop in curtain wall system, , pop out vent for façade and system window hardware, , aluminium glass partition system, , aluminium openable louver, , air transfer grill, , fire rated glazed door, , metal fire rated doors, , wooden fire rated doors, , fire rated hardware & system, , fire seal, fire smoke seal, , fire rated glass, , fire rated rolling shutter, , fire curtain, , glass shower partition, , modular toilet cubical, , laminates, , compact laminate sheet, , polysulphide sealant/pu sealant, , glass & mirror, tinted glass,, , high performance glass, reflective glass, lacquered/back painted glass all superior quality, , silicone sealant, , polyester powder coating/pvdf coating, , wired glass, figured/pattern glass, , acoustic seal / door seal, , pvb/sgp laminate film, sentry film, , wood adhesive, , frosted film, , bmu/ façade cleaning system, , dry stone cladding undercut anchor, , stone sealer, , water & stain repellant coating for stone cladding and stone flooring, , gypsum lightweight plaster, , ready mix cement plaster, , crystalline integral, , waterproofing, , water proofing compound, , water proofing membrane (pvc/hdpe)/water, , proofing coating (pu/polyurea/ acrylic/elastomeric cementitious) / sri coating/pitch pu, , water stops - hydrophilic swellable rubber strip (non bentonite type), , polyurethane over deck insulation foam, , food grade epoxy coating for water tank, , vitrified tiles, , tiles/stone fixing adhesive/epoxy grout, , polyurethane concrete flooring, epoxy flooring, self leveling flooring, , wooden flooring and skirting, , raised/false access flooring system, , solid surface (corian), , car deck flooring system, , engineered marble, , rubberized sports flooring (gym flooring), , stainless steel, , structure steel & hollow section-primary producers only, , , , , , access panel in false ceiling system, acoustic panel, aluminium/metal ceilings (baffle and open cell ceiling), aluminum panels, anchor fastener, rebar, chemical/mechanical fastener, expandable fasteners, b, bonded particle board, cement fiber board/ cement, d, dry wall gypsum partition/paneling system for toilet, gypsum wall paneling, , , , , , , grg/gi suspended ceiling grid system & close/ c stud framing system, gypsum ceiling system (plain/perforated),, i c, non shrink cementious precision (anchoring) grout, paint - acrylic emulsion (exterior), paint - anti carbonation paint, paint - plastic emulsion (internal), paint - pu & epoxy paint and primer, paint - synthetic enamel, paint texture paints (interior), plywood (all plywood shall be procured from fully owned factory of the manufacturer and not from jv / outsourced), pu polish for wood work, rock wool/glass wool insulation, , , , , , ss modular railing system, steel (ms) rolled section & plate, steel hollow sections, t, tile trim/threshold, veneer, white cement based putty, soft board, , polycarbonate sheet/skylight, , c, , galvanized/galvalume roofing sheet and accessories d, , pre cast concrete landscape elements, gratings, kerb, drain cover, , preca

Rebar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors