Latest reheater Tenders | Government reheater Tenders

State Government

CTN :45715219

01 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For work of h.p. parts repairs in second pass of boiler including ltsh, economizer, platen sh, front & rear reheater during aoh/coh of unit-5 at 2 x 500 mw, bhusawal tps.

Central Government And Public Sector

CTN :45609040

04 Jul, 2026 NA

Angul - Odisha

Tender For corrigendum : tender for supply of spares for reheater spray control valve - split packing ring 1.5 v/v , gasket-liner/seat ring 1.5 , gasket-body for dresser 88-18262 , radial dynamic gasket 1.5 , liner & seat ring-dresser 88-18262 1.5 , seal retainer for 1.5 rh spray ctrl.v/v , plug & stem m/c-dresser 88-18262 1.5

CTN :45738463

15 Jul, 2026 NA

Tuticorin - Tamil Nadu

Tender For reheater front bottom bend 02 , 120 degree bend for reheater front of circuit 2 , reheater straight tube od 54.00 x 4.00 - sa213t22 , reheater front bottom bend 05

corporations/Associations/Others

CTN :45706460

13 Jul, 2026 NA

Anpara - Uttar Pradesh

Tender For tender for supply of reheater block valve with actuator , plug m/c 2 inch sh , plug pin 2 inch 41k , sh spray c/v body gasket 2 inch , sh spray c/v split packing ring (919) , sh spray c/v split packing ring (933) , plug m/c 2 inch rh , rh spray c/v seat ring m/c 2 inch , gasket body 2 inch 78200 2500 , rh spray c/v flexible graphite packing , plug stem m/c 0.75 inch-16unf-2a , body gasket 2 inch 41k 2500 , plug stem(shouldered) 1/2 inch , sh spray c/v seat ring m/c2 inch

State Government

CTN :45701261

30 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of repair/servicing of cci make superheater & reheater spray control valves & prds spray control valves in bhel boiler of unit no.3 during coh at cstps, chandrapur.

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

State Government

CTN :45699883

29 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For work of h.p. parts repairs in second pass of boiler including ltsh, economizer, platen sh, front & rear reheater during aoh/coh of unit-5 at 2 x 500 mw, bhusawal tps.

corporations/Associations/Others

CTN :45666729

08 Jul, 2026 34.11 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of tubular protector for spacer tube , size l-1000mm , id-55 mm , tubular protector for rear w.w. screen tube , size l-1500mm , id-55mm , tubular protector for final s.h. tube , size l-1000mm , id-55mm , tubular protector for tertiary super heater & reheater size 1500x58.0x4.0 mm , tubular protector for tertiary s.h. tube , size l-1000mm , id-57mm , u clamp of size id-57 mm , u clamp of size id-63mm , tubular protector for economizer & primary s.h. vertical tube , size l-1000mm , id-52mm , tubular protector for economizer & primary s.h. vertical tube , size l-1500mm , u clamp of size id-53mm , tubular protector for pri. s.h. tube , size l-1500mm , id-45mm , u clamp for ash protector of primary sh horizontal size id-45 mm , tubular protector for sec. & ter. rh coil , size l-1500mm , id-64mm , u clamp of size id-65 mm , width 40mm , th.-4.0mm , 90 degree bend tubular shield for primary super heater horizontal size id-45.5 mm , reverse 90 deg bend ash protector for primary sh horizontal size id-45.5 mm , semi circular protector for spacer tube 60 deg bend size-1500x65x4 mm

State Government

CTN :45616105

23 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of repair/servicing of cci make superheater & reheater spray control valves & prds spray control valves in bhel boiler of unit no.3 during coh at cstps, chandrapur.

State Government

CTN :45585322

21 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For work of h.p. parts repairs in second pass of boiler including ltsh, economizer, platen sh, front & rear reheater during aoh/coh of unit-5 at 2 x 500 mw, bhusawal tps.

Reheater Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors