Latest relay test kit Tenders | Government relay test kit Tenders

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion test apparatus as per is2386 part4 1963 , accelerated curring tank having cap to accom 6 12 18 concr cube 150mm , big size oven electrically operated, thermostatically controlled , bitumen extractor, hand operated, bowl capacity 1500 gms bitumen, supplied , bitumen laboratory mixer including required accessories 20 ltrs , rebar locator , digital compression testing machine , automatic asphalt content meter self recording rain gauge, maximun minimum thermometer digital, screw gauge, prismatic compass with stand, auto/dumpy level with stand and staff, abney level, robotic total station 1 inch accuracy bluetooth auto target, kerosene or gas stove or electric hot plate, ghat tracer, pegging rod, optical square 90 degree, ranging rod 3 mtr long, high precision binacular, temperature gun for checking bituminous surface works, sample tray enamelled, vibrating wire, termperature sensor, portable indicator, steel tape 5m, standard pyconometer of 50 ml, digital hygrometer, post hole auger with extensions, rodo meter - high precision wheel odometer , hot plates 200 mm dia (1500 watt.) voltage 220v to 230v, circular plates of 250 mm dia, sampling pipettes fitted with pressure and suction inlets, 10 ml capacity., sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer, ennore standard sand (25 kgs bag ), weighing machine 0 kg to 10 kgs, mould (15cmx15cmx15cm) for compressive strength of concrete, digital vernier calipers (accuracy 0.001 mm), thermometers mercuryinglass //bid details 2 / 74

Central Government/Public Sector

CTN :45120070

01 Jun, 2026 NA

Karimnagar - Telangana

Tender For corrigendum : supply of three phase relay test kit

Central Government And Public Sector

CTN :44956756

27 May, 2026 NA

Thane - Maharashtra

Tender For corrigendum : supply of fully automatic three phase relay test kit

State Government

CTN :45237727

03 Jun, 2026 NA

Ballia - Uttar Pradesh

Tender For supply of repairing of kingshine make universal relay test kit

CTN :45238230

28 May, 2026 5.37 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of visual survey visual inspection for surface damages damage classification the visual inspection shall largely cover areas of high distress corrosion moisture , rebound hammer test for determining the estimated compressie strength of concrete and iniformity of concrete , ultrasonic pulse velocity test for ascertaining the quality of concrete uniformity of concrete in terms of soundness and density of concrete , core extraction and testing extracting the concrete core samples following the codal provisions and evaluating the properties , half cell potential test measuring the half cell surface potentials at selected locations on rcc members , carbonation test measurement of carbonation depth by phenolphthalein spray test at selected locations , ph value to check alkanity fo concrete as per relavent , report interpretation and recommendation , report interpretation and recommendation preparing and submitting comprehensive report consisting of findings from visual inspection , repairing methodology and retrofitting scheme for structural serviceability and safety ) /bid number : gem/2026/b/7517515 * /dated: 18-05-2026 & & / bid document 1 / 19