Latest relay valve spare Tenders | Government relay valve spare Tenders

State Government

CTN :45723782

30 Jul, 2026 3.45 Crore

Kota - Rajasthan

Tender For neurosurgery items consumable, proprietory,implants tender- (anterior cervical plating system variable angle screw system), (anterior cervical interbody fusion device with screw mechanism (zero profile), anterior cervical interbody fusion device with integrated plate., , cervical peek cage, , expandable corpectomy cages., , expandable corpectomy cages with integrated screw mechanism, , locking cervical cage with plate, , titanium mesh cage for vertebral body replacement per mm diameter, , odontoid screw, , top loading pedicle screw system, , ton loading presssembled bobravial nedicle, , a) polyaxial screw, , b) rod, , c) reduction screw, , d) cannulated polyaxial pedicle screw for reinforcing using bone cement, , transforaminal lumbar interbody fusion. (tlif), , a) cage for open surgery, , b) cage for endoscopic surgery, , posterior lumber interbody fusion plif., , kyphoplasty kit, , vertebroplasty kit, , hydroxyapatite (ha) coated pedicle screws, , multilevel percutaneous pedicle screw fixation for thoraco lumbo - sacral fixation., , a) pedicle screw, , b) rod, , pedicle screw system with cobalt chrome multiaxial head, , fenestrated percutaneous pedicle screw fixation system, , burr hole covers with screws, , vp shunt, , pressure valve, , omaya reservior, , theco paritoneal shunt, , dainage systen, , should be onlay dural graft,, , * should be bioabsorbable,, , * suturing/gluing should not be required,, , * should be sterile., , , , , , , , , , , , fibrin glue, , biological fibrin glue with calcium chloride human protein kit 2 ml, , flowable haemostate, , absorbable gelatine based topical flowable haemostate with prefilled syringe., , bone cement, , synthetic pmma & hydroxyapatite combine with osteoconductivity., , -should be 50% hydroxyapatite in the powder component., , spinal card implant, , inratheacal programmable pump, , dural patch, , recharge free implantable sacral neuro stimulator (mri compatible):, , nasal packing, , alcohol nasal packing with thread -equivalent to merocell of medtronics/ ultracel absorbent innovia, , dye indocyanine green dye- 20 ml/50 ml, , dye levulanic acid-020 ml/50 ml, , bipolar bipolar cable: compatible with alan made cautery, , bipolar cable, , cable: compatible with storz endoscopy cautery, , bipolar bipolar cable: compatible with shalya made cautery, , bipolar bipolar forceps non sticky tip bayonet / straight: compatible with alan made cautery, , bipolar forceps, , forceps non sticky tip bayonet / straight: compatible with storz endoscopy cautery, , bipolar forceps, , forceps non sticky tip bayonet / straight:compatible with shalya made cautery, , shunt subcutaneous ventriculo peritoneal shunt passer (paediatric), , shunt subcutaneous ventriculo peritoneal shunt passer (adult), , microscope, , disposable microscope cover for pentero 900, , b, , c-arm cover, , ot shoes, , drapes, , antimicrobial/iodofor impregnated drapes of various sizes, , balloon catheter, , balloon catheter for endoscopic third ventriculostomy -4 fr/5 fr, , aneurysm clip (sugita type), , be made up of titanium/mri compatible material., , i. sugita type, , ii. made of titanium or mri compatible material, , iii. both temporary and permanent type, , iv. fenestrated/ non fenestrated, , v. in various shapes straight/ up curve/down curve/bayonet type/ right angle be lateral bent, , vi. sizes mini/5mm/6mm/7mm/8mm/9mm/10mm/ 12 mm in each shape and type, , vii. with clip applicators availability for both permanent and temporary clips of vam time of surgery, , cushing dural hook 140mm, , gruenwald forceps bayonet shape,- 7" t.c. tip, , 200mm mayo hegars needle holders, , hegar needle holder withgroove 20cm, , brain cannula 8mm, , brain cannula 10mm, , mayos scissors cd. 160mm, , gerald dressing forceps bayonetplain 190mm, , yasargil micro scissorstraight 185mm, , jacobson micro scissorcurved 185mm, , potts-yasargil micro scissor angled 45 deg, 185mm, , micro suture tying forceps straight tip 0.3mm x 150mm, , micro suture tyi

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45702689

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfc-1.bin no- 7.exmp.06.2026-27.08 description- scrap copper lump & sheets (comprising of fire bronze pieces, plats, stays, rivets, stude, rods, pipe etc) copper wire without insulation. copper boring & turning. our offer:- scrap copper miscellaneousllaneous with or without iron attachment. such as- rt dropper clip, catenery clip,contact tips for cgr (only copper), contact liver for cgr, bus bar, copper boring, plier, flexible shunt and mobile contact, scrap copper pipe,transformer oil cooler tube, rectifier bus bar , loop copper pipe, loader unloader pipe for a/c, half round oval contact copper, finger contact, stud bolt, copper ferule, carbon brush copper pigtail, copper tube, blow out coil for line contactor, r b shunt, shunt for armeter, blow out coil for shunting contactor, battery isolation switch, copper connecting angle, copper briddle wire, ptfe neutral section runner, section insulator runner, copper tubular terminal, discharge valve, copper socket, set of electrode & nozzle & other copper miscellaneousllaneous in bin no-7. qty=3686 kgs. loading will be done by purchaser's own arrangement.

Central Government And Public Sector

CTN :45682189

30 Jun, 2026 NA

Bongaigaon - Assam

Tender For supply of ovh kit for ep contactor to cgl part 787241073 for 1400 hp demu consisting of 04 items: 1) shunt with contact (mcl assembly) 01 no. 2) pick up coils (electro magnet valve) 01 no. 3) contact tips 01 set 4) valve gasket 01 set. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45597059

02 Jul, 2026 NA

Vadodara - Gujarat

Tender For supply of instruments 13 gauges and 9 cms , semi-automatic core biopsy instrument set 18g 10cm length , semi-automatic core biopsy instrument set 18g 16cm length , disposable biopsy gun spring loaded , airway balloon catheter no 5 x 24mm , airway balloon catheter no 7 x 24mm , airway balloon catheter no 9 x 24mm , airway balloon catheter no 10 x 40mm , airway balloon catheter no 12 x 40mm , airway balloon catheter no 14 x 40mm , airway balloon catheter no 16 x 40mm , manual vacuum aspiration syringe with kit , semi auto matic gun with needle size 18 x 10 , semi auto matic gun with needle size 18 x 16 , semi auto matic gun with needle size 20 x 16 , semi auto matic gun with needle size 16 x 10 , semi auto matic gun with needle size 18 x 20 , bacterial resistance hydrocephalus shunt system ventriculo peritoneal medium pressure with regular reservior. , bacterial resistance hydrocephalus shunt system ventriculo peritoneal low pressure with regular reservior. , dome valve reservoir with 90cm. radio opaque distal part one 15cm. ventricular part and two straignt connector. medium pressure. , dome valve reservoir with 90cm. radio opaque distal part one 15cm. ventricular part and two straignt connector. low pressure. , dome valve reservoir with 90cm. radio opaque distal part one 15cm. ventricular part and two straignt connector. medium pressure with bacterial resistance. , high density polycthylene mesh for durameter patch size 8x10cm. , high density polycthylene mesh for durameter patch size 10x12cm. , high density polycthylene mesh for durameter patch size 15x20cm. , polycaprolactone and hydroxyapatite paste 5 gram , endoscopic retractor for endoscopically -1 , endoscopic retractor for endoscopically-2 , endoscopic retractor for endoscopically-3 , endoscopic retractor for endoscopically-4 , endoscopic retractor for endoscopically- 5 , endoscopic retractor for endoscopically-6 , negative pressure wound therapy system dressing kits 10 x 7.5 x 3.2cm , negative pressure wound therapy system dressing kits 18 x 12.5 x 3.2cm , negative pressure wound therapy system dressing kits 26 cm x 15 cm x 3.2cm , 500ml canister with gel , 1000ml canister with gel single time use portable negative pressure wound therapy system with a small portable sterile pump maintaining a consistent negative pressure of 80mmhg at the wound surface andtobeusedfor7dayswhichmanagesexudate without canister through a combination of absorption in water proof & bacteria proof foam dressing and evaporation of moisture through the outer film of the dressing. dressing size 10cm x 20cm, single time use portable negative pressure wound therapy system with a small portable sterile pump maintaining a consistent negative pressure of 80mmhg at the wound surface of andtobeusedfor7dayswhichmanagesexudate withoutcannisterthroughacombination absorption in waterproof & bacteria proof foam dressing and evaporation of moisture through the outer film of the dressing. drising size 10cm x 30cm, antimicrobial barrier dressing with silcry. nano crystals silver consisting of low adherent wound contact layer of flexible and strechable polyester mesh with open weave structurecoated withhighdensitynanocrystallinesil vereffectiveagainstmrsa&vre. which releases 70-100ppm of silver continuously for 7 days. 5cm x 5cm, single time use portable negative pressure wound therapy system with a small portable sterile pump maintaining a consistent negative pressure of 80mmhg at the wound surface //bid details 2 / 53 andtobeused for7dayswhichmanagesexudate without canister through a combination of absorption in waterproof & bacteria proof foam dressing and evaporation of moisture through the outer film of the dressing. dressing size 15cm x 20cm, single time use portable negative pressure wound therapy system with a small portable sterile pump maintaining a consistent negative pressure of 80mmhg at the wound surface andtobeusedfor7dayswhichmanagesexudatewithoutcannist erthroughacombination of a

State Government

CTN :45175994

24 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of epac seal kit , minimum pressure valve 6 bar , harting connector q5by0 m ql 2.5 mm2 , han a hood top entry 2 pegs m20 , han cgm-m m20x1 5 d 5 to 9mm gland , potentiometer spur gear , rotary damper , high voltage insulation tester with test leads , teflon washer , magnet valve assembly , relay valve set , stud , piston assembly , 2 x 12 mm lg spirol pin , drive rod , special screw , cam , regulator mounting bracket , air pipe reservoir to relay valve , air pipe air filter to air connector , air pipe air filter to pressure regulator , air pipe air reservoir to pressure regulator , air pipe pr. switch to pressure regulator , air reservoir , air filter , connector mounting plate , single bango coupling , elbow , elbow for pressure switch pipe , pressure switch adapter , 0.5mm shim washer , mechanism stop , compression ring , connector block , drive plate assembly , shunt with shunt collector ring for 22cb , brass plug , top insulator and mechanism assembly , bottom insulator assembly ) /bid number : gem/2026/b/7391252 * /dated: 13-05-2026 & & / bid document 1 / 38

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45484346

19 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of dc power supply unit abl8rps24050 for hyd dantal trolley , mpcb 24 32a gv2 me04 for hyd dantal trolley , temp controller model 2020 24 vdc 96x96 and thermowell for rtd sensor for hyd dantal trolley , ill beacont blinking lte 2017 dc 24v red for hyd dantal trolley , pressure relief valve rdba lcn for hyd dental trolley , castor wheel nylon 4 inch fix for hyd oil purifier , hour meter hm 700 240v ac 50 hz 54 sf1 for hyd oil purifier , float switch fgpo 81 sw ele for hyd oil purifier , 3 phase ref transformer for rectifier , 3 phase firing card 8400 ch24b for rectifier , wheels 8 inch dia fixed type and swivel type 4 nos each for rectifier , dc shunt signal amplifier card 8400 259a for rectifier , inverter driver card for frequency converter , hrc fuse 32 amp for frequency converter , glass fuse 1 amp for frequency converter , output over or under voltage card for frequency converter * /bid number : gem/2026/b/7638930 + /dated: 09-06-2026 ' ' / bid document 1 / 14

CTN :45445482

22 Jun, 2026 18.68 Lacs

Pathanamthitta - Kerala

Tender For maintenance of sewage treatment plant of kap 3 rd battalion, adoor, pathanamthitta - revamping of the existing sewage treatment plant having water consumption 98 kilo litre /day for kap 3rd battalion, adoor, pathanamthitta)-general mechanical work - general-maintenance of sewage treatment plant of kap 3 rd battalion, adoor ,pathanamthitta -revamping of the existing sewage treatment plant having water consumption 98 kilo litre /day for kap 3 rd battalion,adoor, pathanamthitta -general mechanical work - supply and fill dry bed media, od33450/2025-2026:supply and fill dry bed media (1.5-inch and 3/4 inch pebbles), supply ,installation and commissioning of 3 nos chemical dosing pumps ,suitable chemical storage tanks ,chemical piping,valve and, od39368/2025-2026:supply ,installation and commissioning of 3 nos chemical dosing pumps ,50 ltr chemical storage tanks ,chemical piping,valve and fittings , complete installation and testing, supply, installing ,testing and commissioning of fine bubble diffuser 90 mm 1 m air flow rate 8 -12 m /hr ., od33396/2025-2026:supply, installing ,testing and commissioning of fine bubble diffuser 90 mm 1 m air flow rate 8 -12 m /hr ., supply and installation of blower (7.5 hp) a1 blower and a1 4175 electrical motor, od33397/2025-2026:supply and installation of blower (7.5 hp) a1 blower and a1 4175 electrical motor, supply and installation of submersible grinder pump 1 hp lubi/equt, od33399/2025-2026:supply and installation of submersible grinder pump 1 hp lubi/equt, supply, installation, testing and commissioning of filter feed pump (7.5 hp), od33432/2025-2026:supply, installation, testing and commissioning of filter feed pump (7.5 hp), supply, installation, testing and commissioning of motor lubi/equt, od33433/2025-2026:supply, installation, testing and commissioning of motor lubi/equt 3 phase 5 hp, supply, installation, testing and commissioning sludge pump (2 hp) 3 phase lubi, od33434/2025-2026:supply, installation, testing and commissioning sludge pump (2 hp) 3 phase lubi, supply installing ,testing and commissioning of bar screen (s.s) (40kg ) 304 ss steel (1*40000) 1 hr 10ltr-15ltr capacity, od33210/2025-2026:supply installation, and commissioning of bar screen consisting of 304 ss steel, 1 hr 10ltr-15ltr capacity, supply and fill media in pressure sand filter, od33613/2025-2026:supply and fill media in pressure sand filter ,pebbles( silex 10mm,silex 6mm, and silex 4 mm), supply and fill media in activated carbon filter ., od33615/2025-2026:media fill in activated carbon filter, supply and installation of mbbr media (white colour), od33596/2025-2026:supply and installation of mbbr media (white colour) 60bag -, supply and fittings of various types of pvc,upvc pipes ,pipe fittings and suitable valves etc. to completemplet(not including installation and pipe line fittings of dozing pump and tanks), od34309/2025-2026:supply and installation of 4-inch pvc (6 kg)with cost of pipe and all pipe fittings like bend, coupling etc, cost of valves, laying charges, transportation cost, any additional labour etc complete, od34338/2025-2026:supply and installation of 2-inch pvc (6 kg)with cost of pipe and all pipe fittings like bend, coupling etc, cost of valves, laying charges, transportation cost, any additional labour etc complete, od34339/2025-2026:supply and installation of 1.5-inch pvc (6 kg)with cost of pipe and all pipe fittings like bend, coupling etc, cost of valves, laying charges,, od34341/2025-2026:supply and installation of 2.5 " upvc pipe with cost of pipe and all pipe fittings like bend ,coupling etc.cost of valves ,laying charges, transportation cost any additional labour etc. to complete, supply of electrical panel board with relays, timers, elcb, mcb(6a,10a,16a & 20a ), 50a-dc ammeter, shunt dc, push buttons,, od34593/2025-2026:supply of electrical panel board with relays, timers, elcb, mcb(6a,10a,16a & 20a ), 50a-dc ammeter, shunt dc, push buttons, indicators, heat sink, 40a-manual ch

Relay Valve Spare Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government

State Government