Latest retaining plate Tenders | Government retaining plate Tenders

Central Government/Public Sector

CTN :45303515

27 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For spares for huagheng orbital welding machine - spare wire feed roller (feeding rollers), od 1.0mm for huagheng orbital tts welding head., spare wire feed roller (feeding rollers), od 0.8mm for huagheng orbital tts welding head., spare wire feed roller (pressing rollers), od 0.8mm for huagheng orbital tts welding head., spare wire feed-in hose liner, 0.8mm, 12cm for huagheng orbital tts welding head, spare wire feed roller bearing (1 set=2 nos in each type) for huagheng orbital tts weldinmg head., spare wire feed nozzle, od: 1.0mm for huagheng orbital tts welding head., spare wire nozzle, od: 0.80mm for huagheng orbital tts welding head., spare paper roll for printer for huagheng orbital tts welding head., spare tungsten electrode holder od: 2.4 mm for huagheng orbital tts welding head., spare gas lens, od: 24mm for huagheng orbital orbital tts welding head., spare wire feeding hose for huagheng orbital tts welding head., spare seals used in welding head (all types of o-ring, 1 pkt =10nos) for huagheng orbital tts welding head., spare clamp block for huagheng orbital tts welding head, spare wire nozzle clamp., spare jd-7 ceramic nozzle for small torch (standard), spare knob for small torch for huagheng orbital tts welding head, spare cushion for small torch for huagheng orbital tts welding head, spare wire support for small torch for huagheng orbital tts welding head, spare small welding torch for huagheng orbital tts welding head., spare arc ignition ring for small torch for huagheng orbital tts welding head., coolant (5 ltr /per can) for huagheng orbital tts welding head, spare t8 localizer for tube id: 10.30mm for huagheng orbital tts welding head., spare t8 rolling head for huagheng orbital tts welding machine, spare t8, 45 degree mounting plate for localizer seat for huagheng orbital tts welding head.

Central Government/Public Sector

CTN :45134697

01 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : fabrication and supply of pressure parts with bhel materials (osb) for various projects and transportation of finished goods to respective project sites. - raichur economizer (support plate & collector support) , anpara economizer (support plate & collector support) , ukai economizer (support plate & collector support) , dvc mejia economizer (strap support) , ukai lt super heater (strap support) , bokaro economizer (strap support) , bakreswar reheater , muzaffarpur reheater , korba reheater , dvc chandrapura economizer (panto plate support) , slpp evaporater , barsingsar pot panel , anpara straight panel with wear bar welding

Central Government/Public Sector

CTN :45293076

01 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of - set of items for bp-001.a -- contains item no. 3-4 (swivel pin, 44993700004, aa10108, 1 nos.), item no. 7 (roller brg. retaining plate, 14993700004, aa10119, 4 nos.), item no. 11 (end cover, 14993700004, aa10108, 4 nos.), item no. 15 (locking plate, 24993700003, aa10108/aa10119, 2 nos.), item no. 18 (key 14tkx22x15 lg, bp-001.18, aa10212, 2 nos.), item no. 22 (roller retaining pad, 44993700002, aa10108, 2 nos.) & item no. 27 (locking bracket, 34993700005, aa10108, 1 nos.) - | quantity - 300

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

CTN :45305462

16 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of ecp bulk acid unloading pumps and bulk acid transfer pumps spares for regular and breakdown maintenance of the equipment in sd-i - casing o ring, neophrene, p.no.30 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange delivery,ci(is:210gr.fg260), p.no.29 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange suction, ci(is:210gr.fg260), p.no.28 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, coupling key, ss (6x6x630) p.no.27 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland plate studs, m8, p.no.26 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing studs, m12, p.no.25 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o-ring far end, (80x30)neoprene, p.no.24 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller gasket, viton, p.no.22 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, thrower, uhmwpe, p.no.21 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o ring (drive end), 90x3 neoprene, p.no.20 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil drain plug, zinc coated ms, p.no.19 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (far end), 30x42x10, p.no.18 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, housing support, ms (is:2062) ,p.no.17 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft, ss 431 ,p.no.14 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, breather, zinc coated m.s., p.no.13 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing mouting ring, ms (is:2062), p.no.10 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (drive end), 35x47x10, p.no.09 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (f e), ci(is:210gr.fg260), p.no.08 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland cover, ss-316, p.no.07 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (d e), ci(is:210gr.fg260), p.no.06 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing housing, ci(is:210gr.fg260)p.no.05 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft sleeve, hostelloy c, p.no.04 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, back plate, uhmwpe, p.no.03 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller, uhmwpe, p.no.02 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller casing, uhmwpe, p.no.01 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440

CTN :45307643

13 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of 7404128934 support mounting plate drg. no mct- 3376 , 7409328932 mount plate drg. no. mct-3375 , 7452228936 spring (mount) , drg. no. mct-289/36

CTN :45319813

02 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of 7404128934 support mounting plate drg. no mct- 3376 , 7409328932 mount plate drg. no. mct-3375 , 7452228936 spring (mount) , drg. no. mct-289/36

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

CTN :45306403

30 May, 2026 30.78 Lacs

Faridabad - Haryana

Tender For beautification and development of undeveloped park through plantation of grass, shrubs, open gym, children play equipment etc. in gali no.54 sanjay colony, ward no. 5, faridabad. - transportation all items, installation charge all items, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm nb b class gi-pipe. the handle frame is made of 25mm nb b class gi-pipe. foot rod is made from 50x50 ms square pipe of 3mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f air walker is made from is-1239 b class gi-pipe. the bend pipe is of 80mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 25mm nb c class gi-pipe. the leg frame is made of 32mm nb b class gi-pipe. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick,, p/f horse rider is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and connecting rods is made of 25mm nb c class gipipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick., p/f leg press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick, p/f push-up-bar is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from

Retaining Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others