Latest roof element Tenders | Government roof element Tenders

State Government

CTN :45160395

02 Jun, 2026 NA

Godda - Jharkhand

Tender For providing and applying integral waterproofing to roof slab of control room building at 220/132/33 kv gss lalmatia

CTN :45260324

30 May, 2026 NA

Panchkula - Haryana

Tender For supply of surface preparation clean top surface of roof rcc slab using electric wire cup grinder to remove surface imperfections , surface crack repair cracks on top surface rcc slab wider than 1mm required to be cut and open in v groove manner , surface crack repair , rainwater outlets treatment hacking and chipping the surface around the rainwater drain outlet up to 25mm in depth , waterproofing application premix of two component high strength hybrid urethane elastomeric waterproofing coating using an electric double paddle mixer , prepare the joint by cleaning all loose material dust and debris substrate moisture must be less than 4 percent , screed repair in pockets as required remove loose and damaged concrete roof screed in pockets with mechanical cutter

CTN :45246186

08 Jun, 2026 532.92 Crore

Guntur - Andhra Pradesh

Tender For investigation, design and construction of civil structure (sub structure and super structure) works for spire , parking ring, roof, approach bridges over palavagu, shallow water body around the legislative assembly building including earthwork, pile or raft foundations, rcc framed structure consisting of retaining wall, shear/core wall, slabs, beam, pt slab and beam inclined/flared shear walls, columns, using modular/system / fair finish/express formwork,, reinforcement works, waterproofing and miscellaneous works for legislative assembly building in super block e of amaravati government complex area in amaravati capital city, andhra pradesh on lump sum contract (percentage tender) system

Central Government/Public Sector

CTN :45117123

11 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of lwfcwac roof assembly to drawing no. 83216001, col.i, alt "b"- 1 no and final roof element to drg. no. 87716014, col.i, alt "d" - 2 nos and roof endpart to drg. no. 87716015, col.i, alt "d" - 2 nos the firm shall fulfil the requirement as per icf/md/specn.200, issue status-01, rev.04 with amendment no-01. special condition : schedule a- (to be delivered to shell) complete roof assembly to be supplied with welding pins welded to roof assembly as per drawing. schedule b- (to be delivered to fur) cap to drg no 49516008002, alt. 'a' and serrated spring washer to drg no 49516008003, alt. 'a' of required quantity as per drawing are to be packed in suitable polythene bags of 100 microns thickness with printed label with complete details kept inside the polythene bags. (complete details: 1. item description, 2. qty in the packing, 3. date of packing, 4. po no., 5. type of coach, 6. vendors name & address) "polythene bags to be sealed properly to prevent moisture and water entry". to be supplied as a set.-all the items to be supplied in coach sets only.-packing as pericf/j&t/misc-2627, alt 'b'.- safety instruction as per icf/j&t/sk-1867, alt."nil".. (safety item) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45018581

05 May, 2026 NA

Thiruvananthapuram - Kerala

Tender For waterproofing of roof slab of substation buildingof cdit and plastering thesurfaces on the ceiling

CTN :45044607

11 May, 2026 20.25 Lacs

Panchkula - Haryana

Tender For supply of surface preparation clean top surface of roof rcc slab using electric wire cup grinder to remove surface imperfections , surface crack repair cracks on top surface rcc slab wider than 1mm required to be cut and open in v groove manner , surface crack repair , rainwater outlets treatment hacking and chipping the surface around the rainwater drain outlet up to 25mm in depth , waterproofing application premix of two component high strength hybrid urethane elastomeric waterproofing coating using an electric double paddle mixer , prepare the joint by cleaning all loose material dust and debris substrate moisture must be less than 4 percent , screed repair in pockets as required remove loose and damaged concrete roof screed in pockets with mechanical cutter

Central Government/Public Sector

CTN :44948335

06 May, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : set of final roof element for ac 3 tier amrit bharat 3.0 with flat roof coaches, as per drawing: mp26freab3tf version 0, packing instruction: 1. the supplier shall pack the final roof element in a suitably designed returnable fixture in such a way thatfinal roof element shall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with final roof element be retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving condition of five coach set of final roof element. 4. the fixture /frame/pallet should be designed so that the packed final roof element preferably remain in horizontal position to minimize surface area. 5. it should also be suitable for storage of final roof element under open sky. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44969480

06 May, 2026 NA

Kapurthala - Punjab

Tender For set of final roof element for ac 3 tier amrit bharat 3.0 with flat roof coaches, as per drawing: mp26freab3tf version 0, packing instruction: 1. the supplier shall pack the final roof element in a suitably designed returnable fixture in such a way thatfinal roof element shall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with final roof element be retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving condition of five coach set of final roof element. 4. the fixture /frame/pallet should be designed so that the packed final roof element preferably remain in horizontal position to minimize surface area. 5. it should also be suitable for storage of final roof element under open sky. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44873048

08 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of lwsczac shell kit 534 a one coach set of roof, sidewall and end wall for lwsczac 534 1. roof assembly to drg no 53416001, alt 'c' - 1 no, 2. final roof element cpl to drg no. 87716014, alt 'e' - 2 nos. 3. final roof element cpl to drgno. 87716015, alt 'e' - 2 nos. 3. side wall to drg no. 53414001, alt 'd' - 1 no. 4. endwall to drg no 59315007, alt 'b' - 2 nos. firm shall fulfill the manufacturing facility as per icf/md/spec-200, issue status-01, rev 04 with amendment no 01. firm shall fulfill the manufacturing facility as per icf/md/spec-315, issue status-01,rev.00, with amendment no 01. b one coach set of welding parts on body shell and partition frames for lwsczac coaches to drg. no. 1. (lwsczac) 53410002, alt 'b' - 1 no. 2. (lwsczac) 53410054, alt 'l' - 1 no. 3. 58110016, alt 'a' - 6 nos. 4. 58110015, alt 'a' - 3 nos. 5. aaa10972, alt 'a' - 3 nos. 6. aaa10976, alt 'nil' - 1 no. 7. aaa10977, alt 'nil' - 1 no. 8. aaa10978, alt 'nil' - 1 no. 9. aaa10979, alt 'nil' - 1 no. 10. aab10007, alt 'a' - 4 nos. 11. aaa10963, alt 'nil' - 2 nos. 12. ssa10018, alt 'nil' - 3 nos. 13. aaa10967, alt 'nil' - 1 no. 14. ssa10021, alt 'nil' - 2 nos. 15. 58110017, alt 'c' - 2 nos. 16. aaa10970, alt 'nil' - 4 nos. 17. aaf10937, alt 'nil' - 3 nos. 18. (lwsczac)53410001, item.25, alt 'r' - 12 nos. 19. aab10014, alt 'nil' - 4nos. c under frame arrangement to drg no. 85111001 col 1. alt 'p' - 1 no. firm shall fulfillthe manufacturing facility as per icf/md/spec-147, issue status 01 rev.02 with amendment no.02. special condition : packing as per icf/j&t/misc-2201, alt 'e'. packing as per icf/j&t/sk-1809, alt 'a'. packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as normal side up & side bearer side down. packing conditionas per icf/j&t/sk-1865, alt 'a'. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]