Latest roof slab Tenders | Government roof slab Tenders

State Government

CTN :45333107

16 Jun, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of emulsion paint , synthetic enamel paint weather resistant , aluminium sliding door bolt , aluminium tower bolt , aluminium door handle , mild steel pressed butt hinges , ceramic glazed floor tiles anti skid matt finish , float glass clear plain sheet 5 mm thick , ms casement stay straight peg type , european type water closet wc pan p trap , wash basin glossy finish , water storage tanktriple layer , cement fibre board , paint brush , ppgi roofing sheet 0.50 mm thick , paint thinner , pvc door frame frame thickness 5 mm waterproof , solid pvc door shutter thickness 35 mm waterproof , ordinary portland cement , natural river sand , pulverised stone sand dust , crushed stone aggregate , cement concrete hollow block ) /bid number : gem/2026/b/7585996 * /dated: 26-05-2026 & & / bid document 1 / 22

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

Central Government And Public Sector

CTN :45346153

04 Jun, 2026 3.77 Lacs

Damoh - Madhya Pradesh

Tender For repair of roof slab leakage and miscellaneous civil maintenance works at ola nfs site in te building singrampur oa damoh ba sagar 2nd call

CTN :45004643

29 May, 2026 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply of construction mtrls : : - stone aggregate 12-20 mm , stone aggregate 40 mm , stone aggregate 63 mm , sand , rr stone , quick setting compound , brick bats oblique stone agg 40 to 63 mm , lime , bitumen , pcc block 400x200x200 , bitumen filler board 8 feet by 4 feet , black granite 2 mtr by 0.5 mtr

CTN :45332914

05 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of store for igloo - cement opc 43 grade , coarse sand river oblique m sand , graded stone aggregate 20mm , graded stone aggregate 40mm , pcc solid block of size 400 x 400 x 200mm 75 kg per cm2 , tmt steel 25mm grade fe 500 , tmt steel 16mm grade fe 500 , tmt steel 12mm grade fe 500 , binding wire 18 gauge , oil bound distemper , primer , polythene membrane sheet of grade 2504 thickness 150 micron , water proofing compound in 1 kg packing , blast door 3000 x 2800 as per elevation including all fitting and fixtures , ventilator 600mm dia with mesh , non sparking gritless flooring moc , explosion proof ip66 lighting and fittings , lightning protection system cu strip oblique finial , 16 sqmm 2 core lt ug xlpe cable 200rm and point wiring with 4 nos flame proof lights , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm to bend 12mm and 10mm tmt bar , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft colour green , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green oblique black , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia outer pipe od 60mm and inner pipe od 48mm of 3mm all as per brief technical specification , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners including all necessary jointing arrangement nut bolt and jointing cleats as per tech specs , portable ms body needle vibrator machine with power 3 hp to 5 hp weight 20 to 30 kg petrol engine with min frequency 50 hz voltage 200 to 300 for concrete vibrating as per tech specs

CTN :45327183

15 Jun, 2026 10.00 Lacs

Sohagpur - Madhya Pradesh

Tender For regarding the procurement of materials for construction-related works under the sohagpur nagar parishad - murrum supply (per cum) , गिट्टी 40 mm (aggregate supply) (per cum), , ballast 20 mm (per cum), , ballast 10 mm (per cum), , stone dust / crusher dust (per cum), , sand (river/mineral - sand supply) (per cum), , cement opc 43 grade (cement supply) (per bag), , cement ppc 43 grade (cement supply) (per bag), , gravel (rbm) (per cum), , black soil (per cum), , steel tmt bar fe-500 d (steel reinforcement) (ner cal, , cold mix material (per bag), , angle 35*35*5 (per kg), , weather coat wall paint (per itr), , white cement based wall putty (per bag), , red oxide primer (per itr), , crm (per how), , wmm work (wet mix macadam) (per cum), , barbette fencing wire (per kg), , primer coat work (per itr), , tack coat work (per itr), , cc road m-20 construction work (per cum)

CTN :45332844

16 Jun, 2026 NA

Delhi - Delhi

Tender For supply of civil store items for rrc dwarka - ptmt bib cock with flange 15 mm dia , ptmt pillar cock , ptmt towel rail, 600 mm long , ptmt angle stop cock with flange 15 mm , unplasticised p.v.c. connection pipe with brass union 45 cm long 15 mm bore , 15 mm dia ptmt stop cock, male thread , acrylic distemper 1st quality , having voc content less than 50 grams per litrer, make,asian paint , berger,nerolac or equivalent , acrylic exterior paint, make asian paint , berger,nerolac or equivalent , synthetic enamel paint, make berger , asian paint, deluxe of akzo nobel, shalimar or equivalent , flexible coil shaped pvc waste pipe for sink and wash basin 32mm dia , anodised aluminum tower bolt barrel type 100x10 mm , anodised aluminum tower bolt barrel type 150x10 mm , anodised aluminum tower bolt barrel type 200x10 mm , anodised aluminium sliding door bolt 300x16 mm , anodised aluminium handles 125 mm with plate 175 x 32 mm , cp wall mixer 15 mm, make hindware, periware, cera or equavilant , cp basin mixer 15 mm, make hindware, periware, cera or equavilant , cp angle valve 15 mm, make hindware, periware, cera or equavilant , cp pillar cock 15 mm, make hindware, periware, cera or equavilant , cp bib cock 15 mm, make hindware, periware, cera or equavilant , cp shower make hindware, periware, cera or equavilant , cp health faucet make hindware, periware, cera or equavilant , taflon tape , solvent cement , m seal , white cement based putty, water proof , rectangular shape looking mirror, 6 mm thick , soft paint brush 4 inch width , soft paint brush 1 inch , soft paint brush 2 inch , roller paint brush , red oxide zinc chromate primer , zmb thinner , brass hanging type door stopper 150 mm , water thinnable cement primer for interior wall surface, having voc content less than 50 grams per litre , float glass panes of nominal thickness 4 mm weight not less than 10 kg per sqm , portland pozzolana cement 43 grade , coarse sand zone iii , stone aggregate 20mm nominal size , fine sand , galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm , glass putty , water tank alarm , hydraulic door closer , ply wood 12 mm , ply wood 18 mm , ms structural steel, round, square or rectangular hollow tubes etc.

CTN :45302440

15 Jun, 2026 NA

Delhi - Delhi

Tender For supply of portland pozzolana cement 43 grade , coarse sand zone iii , fine sand , stone aggregate 20mm nominal size , modular brick , reinforcement steel bar 12 mm dia , polymethyl methacrylate acrylic sheet with 3 mm thickness , cpvc pipes 20 mm dia , cpvc pipes 25 mm dia , cpvc 20 mm dia elbow 90 , cpvc 25 mm dia elbow 90 , cpvc 25 mm dia union , cpvc 20 mm dia union , cpvc 25 mm dia tank nipple , cpvc 20 mm dia tee , cpvc 20 mm dia reducer , cpvc 25 mm dia coupler , cpvc ball valve 25 mm dia , cpvc ball valve 20 mm dia , cpvc 15 mm dia tee brass , cpvc 20 mm dia female thread adapter, brass insert , cpvc 20 mm dia male thread adapter, brass insert , cpvc copper alloy float valve of nominal size 25 mm , cpvc copper alloy float valve of nominal size 15 mm , ptmt bib cock with flange 15 mm dia , ptmt pillar cock , ptmt - waste coupling 31 or 32 mm , ptmt towel rail, 600 mm long , ptmt angle stop cock with flange 15 mm , ptmt soap dish or holder 138x102x75 mm , unplasticised p.v.c. connection pipe with brass union 45 cm long 15 mm bore , 15 mm dia ptmt stop cock, male thread , acrylic distemper 1st quality , having voc content less than 50 grams per litrer, make,asian paint , berger,nerolac or equivalent , acrylic exterior paint, make asian paint , berger,nerolac or equivalent , synthetic enamel paint, make berger , asian paint, deluxe of akzo nobel, shalimar or equivalent , flexible coil shaped pvc waste pipe for sink and wash basin 32mm dia , taflon tape , solvent cement , nut bolt , ms butt hinges 100 mm size , m seal , white cement based putty, water proof , rectangular shape mirror with plastic moulded frame, 600x450 mm, 6 mm thick , soft paint brush 4 inch width , soft paint brush 1 inch , soft paint brush 2 inch , roller paint brush , red oxide zinc chromate primer , zmb thinner , ms sheet 1 mm thick , ms structural steel, round, square or rectangular hollow tubes etc. , glass putty , ms handle 150 mm size , ms tower bolt 200 mm size , water thinnable cement primer for interior wall surface, having voc content less than 50 grams per litre , galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm , precoated galvanised iron profile sheets, size, shape and pitch of corrugation as approved by engineer in charge 0.50 mm //bid details 2 / 48

CTN :45280175

11 Jun, 2026 NA

Delhi - Delhi

Tender For supply of portland pozzolana cement 43 grade , stone aggregate 20mm nominal size , coarse sand zone-iii , fine sand , ceramic glazed floor tiles of size 300x300 mm , wall tiles of size 300x300 , vitrified tiles 600x600 mm , unplasticised rigid pvc rain water pipes 110 mm diameter , single tee with door 110x110x110 mm , pvc bend 87.5 degree 110 mm bend , water closet european type wc pan , indian style squatting pan with long pattern , flushing cistern 10 litre capacity - white , water closet european type w.c. pan only seat cover , spendil half turn , cp brass telephonic wall mixer , cp pillar cock , flexible coil shaped pvc waste pipe for sink and wash basin 32mm dia , 600x450 mm beveled edge mirror of superior glass complete with 6 mm thick , ss bottle trap for wash basin and sink , gun metal gate valve 25 mm nominal bore , ball valve brass of 15 mm nominal bore , cp brass shower rose with 15 or 20 mm inlet 150 mm diameter , ptmt long body bib cock , cp angle valve make hindware, periware, cera or equavilant , p.v.c. connection pipe 15 mm nominal bore with 45 cm length , concealed cistern full accessories like giblet, cover, valve, lock in toilet , float glass panes of nominal thickness 4 mm and weight not less than 10 kg per sqm , water proofing compound dr. fixit for seepage , ss towel rail , cp hand held health faucet of toilet , synthetic enamel paint , 30 mm thick pvc door , brass hanging type door stopper 150 mm , p-trap for toilet , solvent , white cement for floor tile , g.i. pipe 15 mm nominal dia , g.i. elbow 15 mm dia , g.i tee for 15 mm nominal dia , g.i. socket , cement based wall putty ) /bid number : gem/2026/b/7566794 * /dated: 21-05-2026 & & / bid document 1 / 37

CTN :45286611

28 May, 2026 6.00 Lacs

Bandikui - Rajasthan

Tender For wsp nirman karya dhanawad - excavation of earth up to a depth of 1.5 meters for foundations, trenches, drains, etc.; dressing and compacting the bed; watering; trimming the sides; removing excavated earth; backfilling voids with earth after the foundation work is complete; and disposing of surplus earth up to a distance of 50 meters. , cement concrete (1 part cement : 4 parts sand : 8 parts coarse aggregate / 1 part cement : 3 parts sand : 6 parts coarse aggregate) using 10 mm nominal size stone aggregate; including laying, compaction, curing, etc., for foundation work. , stone masonry for anicuts (check dams) using cement-sand mortar in a 1:6 ratio. , random rubble (r.r.) stone masonry in foundations and plinths using cement-sand mortar (1:6 ratio); including filling side joints/crevices, curing, etc. , stone pitching using single, hammer-dressed stones (15 to 30 cm thick), including supply and all necessary lifting/placement operations. , for culvert/bridge construction: laying/installing a single row of rcc (reinforced cement concrete) np3 hume pipes with the required gradient, using cement mortar (1:2 ratio), including collars. (excluding earth excavation, concrete, and masonry works; applicable for 450/500 mm diameter pipes). , cement plaster on walls (20 mm thick) using a 1:4 ratio mixture of cement and sand; including raking out joints and regular curing for 14 days. , cement concrete (50 mm thick) using a 1:2:4 mix ratio (1 part cement : 2 parts sand : 4 parts stone or brick aggregate of 12 mm nominal size); including mixing, laying, compaction, pressing, curing, etc. , display board and photo contingency

Roof Slab Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector