Latest rs joist Tenders | Government rs joist Tenders

Central Government/Public Sector

CTN :44246604

01 Jul, 2026 30.70 Crore

Chandrapur - Maharashtra

Tender For bid to ras bid to ras corrigendum : supply of m s sheet as per is 1079 (unit - mass) , steel plates for structural and general engineering purposes (v2) , ms flat as per is 2062 50isf8 , hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 , rs joist / ms beam/ column 116mm x100mm , cgi ms sheet as per is 277 0. 63mm , ms rail 30lbs/yd , high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786

State Government

CTN :45687946

14 Jul, 2026 NA

Punalur - Kerala

Tender For disposal of unserviceable pole scrap materials available at electrical section anchal west under electrical division punalur-a type pole – 10 m,rs joist pole,psc pole 7m,psc pole 8m,psc pole 9m,rcc pole,teak wood pole ht,teak wood pole lt

State Government

CTN :45698857

15 Jul, 2026 3.52 Lacs

Balodabazar - Chhattisgarh

Tender For estimate for replacement of 11 kv pcc pole, broken lt pcc pole, replacement of damaged rs joist, 25 kva xmer dp at various village under balodabazar (t/r) d/c of o&m dn. baloda bazar.

State Government

CTN :45451399

29 Jun, 2026 5.00 Lacs

Etah - Uttar Pradesh

Tender For corrigendum : supply of conductor poles and associated work in daviya aapda edsd jaithra c c - safe carriage of 8.5 m pcc pole , safe carriage of 11 and 13 m stp , safe carriage of 9 m stp , safe carriage of line material , opening binding dog raccon rabbit conductor , opening binding weseal conductor gi wire , opening binding of ab cable , erection of 8.5 m pcc as single support , erection of 9 m stp as single support , erection of 11 and 13 m stp as single support , erecton of 8.5 m pcc double section pole , erecton of 9 m stp double section pole , laying stringing dog raccon rabbit , laying stringing acsr weseal gi wire , laying stringing ab cable , straightening of tilted pcc stp single support , straightening of tilted double pole , opening of ht lt 25 kva 63 kva tf connection , opening of ht lt 100 kva tf connection , dismantelling of old material , re sagging of ht lt conductor , re sagging of ab cable , replacement of brocken damaged accessories , retightening of stay rod , providing and fixing of stay rod , earthing of pcc rs joist stp , carriage of old material , mounting of 25 kva 63 kva tf , mounting of 100 kva tf , chopping of tree branches , repairing resagging new guarding ht line

State Government

CTN :45451523

29 Jun, 2026 5.00 Lacs

Etah - Uttar Pradesh

Tender For corrigendum : supply of safe carriage of 8.5 m pcc pole , safe carriage of 11 and 13 m stp , safe carriage of 9 m stp , safe carriage of line material , opening binding dog raccon rabbit conductor , opening binding weseal conductor gi wire , opening binding of ab cable , erection of 8.5 m pcc as single support , erection of 9 m stp as single support , erection of 11 and 13 m stp as single support , erecton of 8.5 m pcc double section pole , erecton of 9 m stp double section pole , laying stringing dog raccon rabbit , laying stringing acsr weseal gi wire , laying stringing ab cable , straightening of tilted pcc stp single support , straightening of tilted double pole , opening of ht lt 25 kva 63 kva tf connection , opening of ht lt 100 kva tf connection , dismantelling of old material , re sagging of ht lt conductor , re sagging of ab cable , replacement of brocken damaged accessories , retightening of stay rod , providing and fixing of stay rod , earthing of pcc rs joist stp , carriage of old material , mounting of 25 kva 63 kva tf , mounting of 100 kva tf , chopping of tree branches , repairing resagging new guarding ht line

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

corporations/Associations/Others

CTN :45636784

30 Jun, 2026 NA

Meerut - Uttar Pradesh

Tender For auction sale of ups battery scrap 600 va scrap,ups battery scrap 3 kva scrap,11 kv damage vcb/ocb scrap,33 kv vcb 1200amp damage scrap,spot billing machine (damage) scrap,t/f stamping (core scrap)tf core stamping core rusted,steel scrap rail piecees,steel scrap rs joist,al cable scrap (other)

CTN :45565089

22 Jun, 2026 8.9 Thousand

Udhampur - Jammu And Kashmir

Tender For name of work: supply of sand and bajri (fine and coarse aggregate), stone, cement, steel etc for various worksof rural development and panchayati raj under mgnrega for the fy 2.25-26 in various blocks of district udhampur - portland cement opc-43 grade manufacturing company must be an iso 9001:2015 certified company, crushed stone coarse aggregate (bajri), fine aggregate (sand), stone (nallah), structural steel such as tees , angles, channels, rs joists, twisted steel/ deformed tmt bars fe500 d and of different size and dia, galvanised steel corrugated sheets of 0.5 mm thick with zinc coating, brick common burnt clay non modular of class designation 7.5, interlocking cc paver block 60 mm thick m 30 should confirm to the requirement of is 15658:2006., chequered terazo tiles 22 mm thick (dark side), 450 mm dia r.c.c. pipes np 2 class metre, 600 mm dia r.c.c. pipes np 2 class metre, 900 mm dia r.c.c. pipes np 2 class metre, 1000 mm dia r.c.c. pipes np 2 class metre, galavanised wire mesh of average width of aperture 1.4 mm sqm 250.00 and nominal dia. of wire 0.63 mm

corporations/Associations/Others

CTN :45532876

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di

Central Government/Public Sector

CTN :45455802

13 Jun, 2026 76.4 Thousand

Dhanbad - Jharkhand

Tender For repairing of 02 no. rs joists (250x150) installed at the entry side of the platform at block-iv electronic road weighbridge under govindpur area.

Rs Joist Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors