Latest rs joist Tenders | Government rs joist Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

State Government

CTN :40356173

02 Jun, 2025 36.88 Crore

Bhopal - Madhya Pradesh

Tender For corrigendum : rate contract for supply of steel supports (r.s. joist, h beams) for a period of one year

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

Central Government/Public Sector

CTN :40343961

30 May, 2025 62.82 Lacs

Kollam - Kerala

Tender For corrigendum : tender for supply of structural steel as per scoc - plate ms 12mm thick 1500x6300mm , ms angle isa 75x75x8mm , beam ms 300x140mm , ms joist 150x75mm ismb , ms angle 65x65x6mm , ismc 100x50mm , beam ms 200x100mm , ismc 150x75mm , ismc 125x65mm , ismc 200x75mm , ismb 100x75mm , joist beam ms 125x75mm , ismc 75x40mm , beam ms 350x140mm , plate ms 10mm thick 1250 x 5000mm , ms flat 25x6mm thick , angle ms 100x100x10mm , ms flat 100x12mm , angle ms 90x90x8mm , ms angle 50x50x6mm , ms angle 40x40x5mm , beam ms 250x125mm , ms angle 25x25x5mm , plate ms 16mm thick 1500 x 6300mm , plate ms 6mm thick 1250 x 5000mm , plate ms 8mm thick 1250 x 5000mm , flat ms 50x06mm , ms flat 25x4mm , ms sheet 3.15mm thick 1250 x 2500mm , ms sheet 2mm thickness 1250 x 2500mm

State Government

CTN :40408287

30 May, 2025 21.60 Lacs

Vikom - Kerala

Tender For disposal of various deteriorated ht and lt tw, psc, rcc, rs joist, rail, tubular and a poles available at various sections under electrical division vaikom

CTN :40376090

03 Jun, 2025 NA

Malkangiri - Odisha

Tender For supply & erection of lt line using as cable 3x95+lx70+ ix16) in the existing over head l t line aaac) in adding with extra intermediate 8 mtr. rs joist pole having average span length of 40/30 mtr. at surge shaft feeder from valve house sub-station of bhep balimela '

corporations/Associations/Others

CTN :40401389

26 May, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of battery charger scrap,ups battery scrap 600 va scrap,ups battery scrap 3 kva scrap,33 kv vcb 1200amp damage,spot billing machine (damage),t/f stamping (core scrap)tf core stamping core rusted,meter/meter box scrap , kwh meter s/p 5x20 a/kwh etc,steel scrap rail piecees,steel scrap rs joist,al cable scrap (other),scrap other "cu",aluminium scrap aaac & others,scrap ms iron scrap

corporations/Associations/Others

CTN :40401394

26 May, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of old vcb panel scrap/ms meltable scrap,11 kv x-arm scrap,33 kv tpmo(kg),steel scrap r,s, joist,steel gi/gs wire scrap/earth wire scrap,tf tank scrap

State Government

CTN :40377622

28 May, 2025 10.52 Lacs

Sambalpur - Odisha

Tender For construction of 3 wire, 3 phase, 11/0.4 kv lt electric line with 9.00 mtr 150 x 150 rs joist pole and 3 phase transformer (sub station) 11/0.4 kva including installation with all required materials etc. all complete (reach-iii)

State Government

CTN :40303338

20 May, 2025 NA

Thiruvananthapuram - Kerala

Tender For sale of old scrap- damaged rs joist pole and damaged a type pole 11 m

Rs Joist Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors