Get complete information related to latest Rubber Channel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rubber Channel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rubber Channel Tenders.
Tender For supply of consumables for emergency maintenance of turbines of kameng hps - runner labyrinth coupling collar m24 hex head bolt of 3mm thead pitch, material: ss304. length: 15 mm hex head (af: 29.4 mm) + 5mm collar (dia: 44mm) + 40 mm threaded portion (m24, 3mm pitch), drawing attached., miv body seal hex head collared bolt. length: 15 mm head (af: 24mm) + 5mm collar (dia :33mm) + 48 mm threaded portion (m20, pitch: 2.5mm), material: ss304, drawing attached, top stationary labyrinth coupling stud m24x3mm pitch, length of stud: 115mm (30 mm threaded portion+ 25 plain portion + 60mm threaded portion), material: en24, drawing attached., bottom stationary labyrinth coupling stud m24x3mm pitch, length of stud: 80 mm (20 mm threaded portion+ 25 plain portion + 35 mm threaded portion), material: en24, drawing attached, cover plate for runner labyrinth coupling bolts, diameter: 46/50mm, thickness: 4mm (2mm + 2mm) as per attached drawing, material: ss316, bonded rubber seal id35xod42x 4mm thick, bonded rubber seal id43xod52x 4mm thick, bonded rubber seal id50xod58x 4mm thick, copper washer id16 x od28 x 3 mm thick, cap nut for top stationary labyrinth fastener as per attached drawing. material: en24, shaft seal gasket as per attached drawing:, material: neoprene rubber, size: od 1032mm x id 822 mm x 6mm thick, 32 nos. of ø19 mm equispaced holes at pcd 965mm, maximum temperature to handle: 80 deg-c, full threaded m36x280 mm stud with double nut & washer, material: ss304, locking wedge for ugb bearing pads. 1 set: two bars (one long and one short), material: hss. drawing attached
Tender For procurement of different spares for chinese make elevators under emiph-i, sgtpp. - procurement of different spares for chinese make elevators under emiph-i, sgtpp., limit switch,car door contact,type:ds131 for seec express elevator 1no, ue-230vac/110vdc, ie-2a/0.5a, ui/ith-500v/10a, ip20, transparent enclosure ( please follow additional data: model: s3-1370b: normal close make: beto or model: ndox 41k ), shoe liner car guide shoe liners # shoe liner(car guide shoe liners) 1set/4pcs e.c.e ( please follow additional data: guide shoe; moc: nylon; dimension: 150mm x 30mm x 30mm (as per sample) ), landing door shoe for ece make elevator acme make: fermatorrn ( please follow additional data: door chanel shoe, dimension: 56mm x 40mm; thickness: 2mm with both side rubber. (as per sample) ), v belt, a 1180 ( please follow additional data: belt, qxpz 1180 cogged raw edge epdm wedge belt, fenner ), belt, timing, 3600-s8m-15, htd for seec express elevator car door type- high torque drive (htd) timing belt, length-3600mm, width-15mm, belt thickness- 5.6mm, tooth height-3.4mm, tooth pitch-8mm, material-neoprene rubber withfiber glass core., reed switch ( please follow additional data: for elevator (as per sample), sichuan express elevator co. ltd. ), vfd for car door astar s2 20p4a2 power 0.4 kw,i/p 220vac,50/60 hz,5.3 a,o/p 220vac,0-50 hz,3a.0.6 kva, oil pot(at feeder on car top) ( as per sample ), hooter industrial 230v ( with power back-up for sichuan express elevator co. ltd. ), rotary blower fan for elevator # ( car roof fan, crossflow fan, model: zqf-330 200, 230v ac, 25w, 1270/1350 rpm, 340/360 m3/hr ; make: ningbo grand fans co. ltd. ), switch,red,1no,call push button dia-37mm for seec express elevator 24vdc, illuminated, colour- red, flush mount ( landing: up/down-25 nos., car: open-close-15 (each); 1-5: 10 (each); 6-9: 5(each) ), board, lop,intl 2000-dv/v1 for seec express elevator sichuan express elevator co. ltd., door sensor (lambada),model:ms720 ( make- t l jones or equivalent ), rope oil for elevator rope usha wrl-60 usha martin, brake coil for hoist,230v ac ( please follow additional data: brake coil for sichuan express elevator co. ltd., coil voltage: 110v dc (as per sample) ), dynamic braking unit,cdbr-4030b,400 v yaskawa vvvf drive cimr f7a4030,30 kwfor s/r vvvf drive, expansion pcb for elevator intl 2000-ex sichuan express elevator co. ltd.
Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.
Tender For supply of size 267 mm x 281 mm x700 mm thick , neuprine rubber o ring for mill hydraulic without any scretches superior quality size 267 mm x 282 mm x75 mm thick , rubberchannel for telescopic valve of clarifier as per sampleupon drg no sksmupon56upon87r , rubber joint as per following sizes a 3mm thick x 1 mtr width x 2 mtr long , b 6 mm thick x1 mtr width x 2 mtr long , neuprined rubber sheet for different valve forecast the tempupto 200 c , a for semikestner exhaust valve drg nosksmupon199upon98uponr13 , b for vapourcell exhaust valve drgnosksmupon199upon98uponr13 , c vapour cell exhaust semikestnerconnedcting valve drgno sksmupon199upon98uponr13 sheet thickness 25mm , d semikestner vapour valve as per drg nosksmupon200upon98 , e vapour cell vapour valve as per drg no sksmupon200upon98 , f quad 1 inch body vapour valve as perfdrg no250upon2000 , g quod 1 inch body exhaust valve as per drg no sksmupon424upon13 , butyle rubber sheet for different valve as following for 40 ton pan vapour valve as per drawing nosksmupon287upon2001 , b for 40 ton pan discharge valve as per drg no ksmupon177upon97uponrupon2000upona , c for continue vacc pan exhaust valve as per drg no sksmupon183upon97 , d pan no 1 exaust valve rubber sheet for 60 ton new pan as per drgno sksmupon285upon2001 , rubber mud seal for clarifier as per drawing no sksmupon453upon17 , rubber mud seal for clarifier as per drawing no sksmupon476upon19 hollow type , different type upon size rubber oil seal as per mykoda price list , rubber hose pipedunlop make in different size for water upon steam as per price list , sugar grader rubber coupling rubber hardness grade90 od 115 mm id 50mm length 415mm as per drg sksmupon301upon2001 , neoprine rubber strip for new quad body man holes as per drg no sksmupon484upon20 , neoprine rubber seat for new vljh condenser man hole as per drg no sksmupon486upon20 , neoprine rubber seat for quad condenser man hole as per drg no sksmupon485upon20 , rubber house pipe 3 upon 4 inch , rubber house pipe 1 inch , wire braded ruponh pipe 3 upon 4 inch heavy duty hot water , rubber strip 20 x 15 x 12 , rubber strip 20 x 20 x 17 , rubber strip nrv for double beat valve 250 x 140 x 12 , molasses ring rubber seal for nk 1300 muponc drg sksmupon512upon23 , dunlop make patta 10 ply width 6 inch thick 1 upon 2 inch
Tender For supply of water supply maint stores ppr gate valve and misc items for the qe jun 26 d d - ppr gate valve suitable for 25mm bore , ppr gate valve suitable for 63mm bore , ppr gate valve suitable for 32mm bore , gate valve bronze with screwed handle of size 25 mm bore medium grade , angle cock cp 15mm one way , gate valve bronze with screwed handle of size 50 mm bore medium grade , gi ppr cpvc tubing medium grade 63 mm bore , female socket for ppr pipe of 63mm bore , gi tubing medium grade 25 mm bore , bib cock brass 15mm bore , brass gun metal spindle with wedge nut for 150 mm sluice valve , female socket for ppr pipe of 40mm bore , gate valve bronze with screwed handle of size20 mm bore medium grade , gi tubing medium grade 15 mm bore , ppr union suitable for 63mm bore , gi tubing medium grade 100 mm bore , angle stop cock cp 15 mm two way , brass gun metal spindle with wedge nut for 100mm sluice valve , gun metal gate valve 40 mm , ppr union suitable for 32mm bore , gi ppr cpvc tubing medium grade 32 mm bore , bib cock 15mm ptmt , air release valve for geyser , cp bib cock 15mm bore , brass gun metal spindle with wedge nut for 80mm sluice valve , gi union 15mm , ppr equal tee suitable for 63mm bore , female socket for ppr pipe of 32mm bore , ppr reducer tee suitable for 63x32mm bore , ppr elbow suitable for 63mm bore , gi tubing medium grade 20 mm bore , pvc connection pipe 15 x 450 mm long , gate valve bronze with screwed handle of size 15 mm bore medium grade , cp connection 15x 600 mm long pipe , gi tee equal 15 mm bore , ppr reducer elbow suitable for 63x50mm bore , gi union 20mm , gi ppr cpvc tubing medium grade 15 mm bore , cp connection 15x450 mm long pipe , pvc float valve complete 50mm , pvc connection pipe 15 x 600 mm long , ppr elbow suitable for 32mm bore , gi long screw 15x75mm , ap3 grease , ppr reducer elbow suitable for 32x25mm bore , gi elbow 20mm , nipple gi 15x150mm long , gi union 25mm , ppr equal tee suitable for 32mm bore , nipple gi 20mm x 50mm long , gi elbow 15mm , gi union 40mm , gi socket reduced 25mm x 15mm bore , gi ppr cpvc tubing medium grade 20 mm bore , gi socket reduced 20mm x 15mm bore , gi tee equal 20mm bore , nut and bolt full thread with washer 80mm long for gyser , ppr socket 25mm , gi union 50mm , ppr reducer elbow suitable for 50x32mm bore , nipple gi 15x 250mm long , ppr union suitable for 20mm bore , nipple gi 20mmx75mm long , female socket for ppr pipe of 20mm bore , ppr reducer socket suitable for 63x32mm bore , elbow reducer 25x15mm , nipple gi 15x100mm long , ppr elbow suitable for 20mm bore , gi tee equal 25mm bore , nipple gi 15mm x 75mm long , ppr equal tee suitable for 25mm bore , rubber sheet for gasket as per sample , ppr reducer elbow suitable for 63x32mm bore , gi socket 20mm , gi nipple 50 x 100 mm long , gi nipple 40 x 100 mm long , gi socket 25 mm , gi socket 15mm , gi nipple 50 x 50 mm long , elbow reducer 20 x 15mm , gi nipple 40 x 50 mm long , tee reducer 15 x 20mm , gi socket 50 mm , tee reducer 15 x 25mm , gi bend 15mm , elbow 25 mm, isi mark , tee reducer 20 x 25mm , gi socket 20 mm , gi socket 40 mm , nipple gi 100mm dia and 15 cm long , nipple gi 100mm dia and 10 cm long , gi reduced elbow 15mm x 20 mm bore , gi bend 20mm , ppr socket equal 15mm bore , ppr equal tee suitable for 20mm bore , sluice valve 150mm bore , sluice valve 100mm bore , sluice valve 80mm bore , air release valve 150mm bore //bid details 2 / 86
Tender For supply of spares and servicing of batch type centrifugal and continuous machine at hbl plant sugauli, east champaran and lauriya, west champaran, bihar - ht bolt full threaded (12x40mm) ht bolt half threaded (10x40mm) ht bolt full threaded (8x25mm) ht allenkey bolt (12x65mm) ss allenkey bolt (12x30mm) ss allenkey bolt (12x35mm) ss bolt (8x15mm) v-seal (alt-1) v-seal (alt-2) buffer pad nickel screen lock patti motor pulley suitable for 1600 rpm for nk 1100 rubber hose pipe (1/4 inch x 1mtr) rubber hose pipe (1/2 inch x 1mtr) rubber buffer rubber star plough up/down seal kit plough in/out seal kit mtc cylinder nozzle pipe (ss) set bottom valve up/down seal kit teflon segment v-seal (alt-1) v-seal (alt-2) massecuite distribution plate set taper wedge