Latest sand aggregate Tenders | Government sand aggregate Tenders

CTN :42449303

20 Dec, 2025 NA

Leh - Jammu And Kashmir

Tender For corrigendum : provn of construction materials in union territory of ladakh - cement , sand , aggregate 12.5-20mm , aggregate 40mm , aggregate 63mm , hardcore 100mm , rr stone , quick setting compound. , white cement , lime , bitumen , tiles 600x600mm , bricks bats/stone agg 40 to 63mm graded , pcc block 400x200x200mm , black granite slab 16-18 , bituminous filler board size 2.40 x 1.20 mtr

State Government

CTN :43055645

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 56/2025-26 interconnection work in various schemes under sub. division kishangarh renwal. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc

State Government

CTN :43055648

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 55/2025-26 interconnection work in various schemes under sub. div. sambhar lake. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc pipe lin

State Government

CTN :42966383

09 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For corrigendum : name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special a

CTN :42702298

07 Dec, 2025 9.92 Lacs

Sandur - Karnataka

Tender For corrigendum : supply of materials for roads works of anthapura gp mgnrega works 2025-26 - form work at1percentage 1432bnstms143sb91259125, de bonding strips 3.75 m 1432bnstms143sb91259125, bituminous sealant 800 ml per joint 23 joints 1432bnstms143sb91259125, polythene sheet 125 mm micron 1432bnstms143sb91259125, air compressor 1 hour initia plus1 hour final 1432bnstms143sb91259125, concrete jiont cutting machine for initial and final cuts 1432bnstms143sb91259125, plate vibrator 1432bnstms143sb91259125, screed vibrator 1432bnstms143sb91259125, needle vibrator 1432bnstms143sb91259125, water tanker 1432bnstms143sb91259125, vibratory roller 8 tonne 1432bnstms143sb91259125, water tanker 6 kl capacity 1432bnstms143sb91259125, concrete mixer 0.4 bar0.28 cum capacity 1432bnstms143sb91259125, water1432bnstms143sb91259125, gravel 2.36 mm bar murrum 1432bnstms143sb91259125, granite metal 40 mm 1432bnstms143sb91259125, granite metal 20 mm 1432bnstms143sb91259125, crushed stone course aggregate 53 1432bnstms143sb91259125, crushed stone chippings 13.2 mm 1432bnstms143sb91259125, broken stone aggregate 40 mm size 1432bnstms143sb91259125, broken granite metal 20 mm 1432bnstms143sb91259125, broken granite metal 10 mm 1432bnstms143sb91259125, coarse sand zone 3 1432bnstms143sb91259125, plasticizer bar super plasticizer 1432bnstms143sb91259125, portland cement 1432bnstms143sb91259125

CTN :43016254

09 Dec, 2025 7.71 Lacs

Belagavi - Karnataka

Tender For construction of metaling road from bhushan upadhyay house to nala from halaga village in belgaum taluk. from 1.12 km to 1.8 km - crushed stone chippings 13.2 mm.,, crushed stone course aggregate 53.,, caseii - unsurfaced gravelled road (add 10 % of cost of carriage to cover cost of loading and unloading), tipper 5 cum capacity,., front end loader 1 cum capacity,., generator 100 kva,., wet mix plant (pug mill),., grit / stone dust.,, fine aggregate/crushed sand 2.36mm - 75 micron at 30, fine aggregate 10mm ,., coarse aggreages 12 mm,.,, granite metal 20 mm.,, granite metal 40 mm.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.

CTN :43017644

09 Dec, 2025 35.29 Lacs

Belagavi - Karnataka

Tender For construction of metaling road from basarikatti chandanahosura road to sambrekar and desaivar s land in belgaum taluka - semi skilled,, fitter(grade1).,., fine aggregate 10mm ,., name ., binding wire,., tmt bars fe 500,., add handling loading and unloading at 2% on material.,, rcc pipes np2 900mm dia including collars., add 24% centering(since centering area increased), add watering charges at 1 % on material.,, mixer (concrete) - 1 cum capacity.,, portland cement,., broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size,, coarse sand (zone iii),, boulders.,, crushed stone chippings 13.2 mm.,, crushed stone course aggregate 53.,, caseii - unsurfaced gravelled road (add 10 % of cost of carriage to cover cost of loading and unloading), tipper 5 cum capacity,., front end loader 1 cum capacity,., generator 100 kva,., wet mix plant (pug mill),., grit / stone dust.,, fine aggregate/crushed sand 2.36mm - 75 micron at 30, coarse aggreages 12 mm,.,, granite metal 20 mm.,, granite metal 40 mm.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.

CTN :43017659

09 Dec, 2025 36.00 Lacs

Belagavi - Karnataka

Tender For construction of metaling road from peejaar land to yallappa chikkalaki land near chalakate in tarihal village of belgaum taluk - semi skilled,, fitter(grade1).,., rcc pipes np2 750mm dia, binding wire,., tmt bars fe 500,., add handling loading and unloading at 2% on material.,, rcc pipes np2 900mm dia including collars., add 24 percent centering charges (since centering area increased), mixer (concrete) - 1 cum capacity.,, portland cement,., broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 40 mm size,, broken stone aggregate 20 mm size,, coarse sand (zone iii),, boulders.,, crushed stone chippings 13.2 mm.,, crushed stone course aggregate 53.,, tipper 5 cum capacity,., front end loader 1 cum capacity,., generator 100 kva,., wet mix plant (pug mill),., grit / stone dust.,, fine aggregate/crushed sand 2.36mm - 75 micron at 30, fine aggregate 10mm ,., coarse aggreages 12 mm,.,, granite metal 20 mm.,, granite metal 40 mm.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.

CTN :42439164

04 Dec, 2025 NA

Allahabad - Uttar Pradesh

Tender For bid to ras supply of mta stores d d - cement opc 43 grade , natural sand , aggregate 20mm , aggregate 40mm , non skid ceramic tiles 300 x 300mm , puf water storage tank of 1000 ltr with lid , puf water storage tank of 500 ltr with lid , rotational moulded polythylene water storage tank 1000 ltr , rotational moulded polythylene water storage tank double layer 500 ltrs , rotational moulded polythylene water storage tank double layer 200 ltrs , frp septic tank 1500 ltrs , 40mm dia pp-r pipe 3 layers , pvc pipe 4 inch dia 3mtr long , pvc pipe 4 inch dia l bend , pvc pipe 4 inch dia tee , pvc pipe 3 inch dia 3mtr long , pvc pipe 20mm dia , pvc connection pipe 15mm dia 450mm long , pvc l bend 2 inch , cp bib cock 15 mm , cp bib cock long spout 15 mm , cp bib cock 20mm , cp stop cock 15mm , cp brass pillar cock 15mm , cp towel rail , cp soap dish , cp shower rose , angle valve for bathroom , brass stop cock 15mm cp t type , brass bib cock , gun metal gate valve 15 mm , exhust fan 300 mm , pvc valve less syphonic action type low level flushing cistern 10 ltr capacity , gi pipe 20mm dia , stainless steel jail without hole , waste pipe for urinal pot , wc indian type , urinal pot , ewc seat cover , european wc with cistern complete set , ss lavoratory pen with cistern 10 ltr capcity , vitreous china wash hand basin white , stainless steel jali with hole , health faucet , wash basin waste pipe , ss wash basin coupling , ss wash basin , steel coat hook four prong , ismb of size 150x80x5.00mm , srt 0.60x1.80m , hdpe sheet 3 mm thickness , hdpe water cover 20x18 , hdpe water cover 30x30 , rivetment fabric flexible 2 m width , vinyl flooring sheet 3 mm thickness , pbs roll , kero heater wicks , corner self of toughenend glass , decorative looking mirror 600x 450mm , angle batton holder , acrylic sheet 8x4x3mm , m seal 200gms , hdpe sand bags 840x360mm , hinges 100mm , white cement , cgi sheet 8x3x0.63mm , cgi sheet 10x3x0.63mm , ppgi sheet 8x3x0.63mm , ppgi sheet 12x3x0.63mm , transparent polycarbonate roof sheet 12 x 4 and 3mm thick , door closer hydraulic , door handle , tower bolt , door stopper , nails 2ninch , nails 3 inch , nails 5 inch , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , paint brush 6 inch , paint red oxide , paint black , paint blue , paint brown , paint bus green , paint og , paint red , paint white , paint yellow , thinner , micron filter sediment rust removal 20 inches for ro , hammam electric rod , stove wicks , ply wood 6 x 3 x 12mm thick , plywood 8 x 3 x 18mm , ply wood 8 x 4 x 6mm thick cement opc 43 grade, natural sand., aggregate 20mm, aggregate 40mm, non skid ceramic tiles 300 x 300mm, puf water storage tank of 1000 ltr with lid, puf water storage tank of 500 ltr with lid, rotational moulded polythylene water storage tank 1000 ltr, rotational moulded polythylene water storage tank double layer 500 ltrs , rotational moulded polythylene water storage tank double layer 200 ltrs , frp septic tank (1500 ltrs), 40mm dia pp-r pipe 3 layers, pvc pipe 4" dia 3mtr long , pvc pipe 4" dia l bend , pvc pipe 4" dia tee , pvc pipe 3" dia 3mtr long, pvc pipe 20mm dia, pvc connection pipe 15mm dia 450mm long, pvc l bend 2", cp bib cock 15 mm, cp bib cock long spout 15 mm, cp bib cock 20mm, cp stop cock 15mm, cp/brass pillar cock 15mm, cp towel rail, cp soap dish, cp shower rose , angle valve for bathroom, brass stop cock 15mm cp t type, brass bib cock, gun metal gate valve 15 mm, exhust fan 300mm make : legrand/havells/anchor or //bid details 2 / 73