Latest sand aggregate Tenders | Government sand aggregate Tenders

Central Government And Public Sector

CTN :45576728

07 Jul, 2026 51.68 Lacs

Bellary - Karnataka

Tender For tender for supply of supply of good quality moorum as directed by the site in charge , supply of good quality flooring granite stone of size 1 to 1.5 m length 0.4 to 0.5 m width , 0.1 to 0.15 m thickness as directed by site in charge. , supply of good quality undressed granite stone of size 0.50 to 0.90 m length 0.40 to 0.50 m width , 0.30 to 0.40 m height/thickness as directed by site in charge. , supply of good quality undressed granite stone (veenering wall stone) of size 1.90 to 2.0 m length 0.50 to 0.55 m width , 0.25 to 0.30 m height/thickness as directed by site in charge. , supply of good quality stone boulders 50 to 200 mm as directed by site in charge. , supply of good quality ancient lakhori brick of size 0.25 x 0.15 x 0.035 or 0.04 m as directed by site in charge. , supply of good quality brick jelly 20 mm down size free from impurities , supply of good quality river sand to be dense , clean , and free from dust , clay , silt , organic matter , and other deleterious materials like mica or soft fragments as directed by the site in charge. , supply of good quality un-slaked lime as directed by the site in charge , supply of good quality gallnut as directed by site in charge. , supply of good quality bail fruit as directed by site in charge. , supply of good quality jaggery as directed by site in charge.

State Government

CTN :45582285

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka botad under taluka panchayat, botad under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm

State Government

CTN :45583213

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka gadhada under taluka panchayat, gadhada under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials

CTN :45574955

30 Jun, 2026 NA

Dewas - Madhya Pradesh

Tender For supply of material (aggregate/mix material, crushed stone, stone dust, moorum)

CTN :45570416

30 Jun, 2026 10.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For the financial year 2026-27 for all types of building construction materials like cement,rebar ballast,muram,boulder etc.rates - laying and jointing pvc pipe. heading, gitti 6mm, gitti 10mm, gitti 20mm, gitti 40mm, river sand, fine sand, hard moorum, soft moorum, cement bricks, kumhar bricks, 60 mmthick paver block of m-30, cement, vetrified tiles, steel 8mm, steel 10mm, steel 12mm, steel 16mm, structural steel, galvanised steel sheet 0.63mm thick, binding wire, pvc pipe 75mm, pvc pipe 100mm, pvc pipe 150mm, pvc pipe 200mm, indian latrine sheet, western latrine sheet, wash basin, white cement, oil paint, distemper, red oxide, marbel, granite, aluminium work, garden green net, rcc hume pipe 200mm, rcc hume pipe 250mm, rcc hume pipe 300mm, rcc hume pipe 450mm, rcc hume pipe 600mm, rcc hume pipe 1000mm, g.i. fencing, angel 7 feet hight jali fetting, mason, majdoor, j.c.b., poklen

CTN :45591989

24 Jun, 2026 10.00 Lacs

Dhenkanal - Odisha

Tender For moorum road connecting qpm unit to main road at kvk dhenkanal

State Government

CTN :45558196

22 Jun, 2026 NA

Medininagar - Jharkhand

Tender For supply of list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractor's profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source , fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. , close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel , aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 to

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

State Government

CTN :45562939

22 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractors profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road st

State Government

CTN :45558189

22 Jun, 2026 NA

Chaibasa - Jharkhand

Tender For the quotation is invited to ascertain and assess the rate of materials as per with lowest market rate for framing of schedule of rate. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision), bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation), taking elastomeri

Sand Aggregate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

State Government

State Government

State Government

State Government