Latest sand pipe Tenders | Government sand pipe Tenders

Central Government/Public Sector

CTN :45730911

07 Jul, 2026 NA

Valsad - Gujarat

Tender For supply of set of sanding arrangement for wap7/wag-9 locomotives consisting of 03 items in 3 nos. i) guard assembly as per drgno ngp/trs/4/25.065 rev-1, qty-01no. ii) adapter for sanding arrangement as per drg. no. ngp/trs/4/25.064 rev-1,qty-01 nos. iii) holder for sander pipe as per drg no. ngp/trs/4/25.089 rev.-2 qty-01 nos. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]]

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

CTN :45057551

06 Jul, 2026 NA

Sagar - Madhya Pradesh

Tender For corrigendum : tender for supply of lockiconorganizationlockpinkiconsign in to unlock| send me onwhatsappmail|wishlistexport2days leftkeyboardsbattery - flow metering system along with all accessories complete at vadinar -supply prices , dcs systems for vbpl-vadinar dt pipeline along with all accessories complete-supply prices , dcs systems for vbpl-vadinar dt pipeline -existing along with all accessories complete-supply prices , dcs systems for vadinar new cot along with all complete accessories-supply prices , dcs systems for vadinar existing cot along with all complete accessories-supply prices , telecommunication system at vadinar ps along with all acessories complete-supply prices , telecommunication system at ip-1a along with all acessories complete-supply prices , dcs systems for vbpl (ps-1a) somasar along with all accessories complete-supply prices , dcs systems for vbpl (ps-1a) somasar -existing along with all accessories complete-supply prices , density and viscosity metering system along with all accessories complete at ps-1a-supply prices , flow metering system along with all accessories complete at ps-1a somasar-supply prices , telecommunication system at (ps-1a) somasar along with all acessories complete-supply prices , dcs systems for vbpl (ps-2) thamna along with all accessories complete-supply prices , dcs systems for vbpl (ps-2) thamna -existing along with all accessories complete-supply prices , density and viscosity metering system along with all accessories complete at ps-2-supply prices , telecommunication system at ps-2 thamna along with all acessories complete-supply prices , dcs systems for vbpl (ps-2a) kunli along with all accessories complete-supply prices , dcs systems for vbpl (ps-2a) kunli -existing along with all accessories complete-supply prices , density and viscosity metering system along with all accessories complete at ps-2a-supply prices , flow metering system along with all accessories complete at ps-2a kunli-supply prices , telecommunication system at ps-2a kunli along with all acessories complete-supply prices , dcs systems for vbpl (ps-3) bawadi along with all accessories complete-supply prices , dcs systems for vbpl (ps-3) bawadi-existing along with all accessories complete-supply prices , density and viscosity metering system along with all accessories complete at ps-3-supply prices , telecommunication system at ps-3 bawadi along with all acessories complete-supply prices , dcs systems for vbpl (ps-3a) sandavata along with all accessories complete-supply prices , dcs systems for vbpl (ps-3a) sandavata existing along with all accessories complete-supply prices , density and viscosity metering system along with all accessories complete at ps-3a sandavata-supply prices , flow metering system along with all accessories complete at ps-3a sandavata-supply prices , telecommunication system at ps-3a sandavata along with all acessories complete-supply prices , lumpsum site work charges as per mr for mr item sl. no. 1.0002 , lumpsum site work charges as per mr for mr item sl. no. 1.0003 , lumpsum site work charges as per mr for mr item sl. no. 1.0004 , lumpsum site work charges as per mr for mr item sl. no. 1.0005 , lumpsum site work charges as per mr for mr item sl. no. 1.0006 , lumpsum site work charges as per mr for mr item sl. no. 1.0007 , lumpsum site work charges as per mr for mr item sl. no. 1.0008 , lumpsum site work charges as per mr for mr item sl. no. 1.0009 , lumpsum site work charges as per mr for mr item sl. no. 1.0012 , lumpsum site work charges as per mr for mr item sl. no. 1.0013 , lumpsum site work charges as per mr for mr item sl. no. 1.0014 , lumpsum site work charges as per mr for mr item sl. no. 1.0016 , lumpsum site work charges as per mr for mr item sl. no. 1.0017 , lumpsum site work charges as per mr for mr item sl. no. 1.0018 , lumpsum site work charges as per mr for mr item sl. no. 1.0021 , lumpsum site work charges as per mr for mr item sl. no. 1.0022 , lumpsum site

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

Central Government / Public Sector

CTN :45682073

15 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of spares for modified sand pipe assembly for 3 phase locomotives. set consists of 03 items. (1) sander nozzle as per drg.no.c/els/lgd/bogie/4/158. set consists of 02 items. i)nozzle (thread pitch 1.5 mm) ref.1-01 no./set. ii) nozzle (thread pitch 2.5 mm) ref.2-01 no./set. (2) set of spares for modified sand pipe assembly, as per drg.no.c/els/lgd/ ex.ftg/3/20, alt-1, set consists of 07 items.i)support angular, ref.1-01no./set. ii)support steel flat, ref.2-01no./set. iii)delivery adopter, ref.3-01no./set. iv)hex.head bolt, ref.4-02no./set. v)hex. nut, ref.5-02no./set. vi)spring washer, ref.6-04no./set. vii)flat washer, ref.7-04no./set. (3) sand ejector dummy for 3 phase locos as per drg. no.c/els/lgd/bogie/4/159 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45674926

01 Jul, 2026 34.16 Lacs

Multi City - Telangana

Tender For laying of 900 mm dia ms pipes and 600 mm dia rcc np3 class storm water pipeline from plot no.303-l, road no.26 to plot no.42, road no.10c, mp and mla colony, jubilee hills, for removal of water stagnation at road no.26, jubilee hills, ward-215, circle-36, khairatabad zone, ghmc (item.no 2)

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

State Government

CTN :45660452

07 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For unit rate of composite items for recharge scheme for new and defunct tube wells/wells for groundwater recharge in bhavnagar dist. for the year 2026-27 - half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/sq.cm. in cement mortar 1:4 (1- cement : 4 -coarse sand ) in foundation and plinth (b) conventional(r&b sor 2024-25 , it.code-06008a2a, p.no.70)(1 represents labour cess added), brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:5. (1- cement : 5 -fine sand) (b) conventional(r&b sor 2024-25, it.code-06001ba, p.no.67)(1 represents labour cess added), providing, laying and jointing in true line and level 110 diametre u.p.v.c (type b) conforming to is 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to isi 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(r&b sor 2024-25 it.no.23067, pg.no.164)(1 represents labour cess added), providing & fixing 200 mm dia "u" pvc casing pipe "cm" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), providing & fixing 175 mm dia "u" pvc casing pipe "cs" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), drilling of bore well by dth rig in rocky formation in all talukas of all districts of zone - iii. up to 350 mtr. for dia 200mm(gwssb 2022-23 sor, it.no.3.2, p.no.2), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(b) dense or hard soil(r&b sor 2024-25 , it.code-04b001b, p.no.47)(1 represents labour cess added), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(d) soft rock not requiring blasting(r&b sor 2024-25 , it.code-04b001d, p.no.47) (1 represents labour cess added), jungle cutting and site clearing(r&b sor 2024-25 , it.code-26117a, p.no.246) (1represents labour cess added), pebbles of size 5 to 10 millimeter (river pebbles)(gwssb mech 2022-23 sor,anne-a sr 18 ), gravel of size 2 to 5 millimeter(gwssb mech 2022-23 sor,anne-a sr 18 ), coarse sand(gwssb 2022-23 sor, section 1d it.no.5.1, p.no.61), backfilling of excavated tranch for pipeline with soil(gwssb 2022-23 sor, section 1&2b it.no.14(1), p.no.40), suppliying o graded stone aggregate of following sizes (forw.b.m. road)(2) hand broken stoneaggregate 40 mm to 63 mm size.(r&b sor 2024-25 , it.code-26011b, p.no.176), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(iv) 20mm(r&b sor 2024-25 , it.code-26012d, p.no.176) (1 represents labour cess added), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(vi) 10mm(r&b sor 2024-25 , it.code-26012f, p.no.176) (1represents labour cess added), spreading and laying stone agreegate of different size in to proper layer specified as per design and drawing inncl. hand packing etc complete with all lead and lift (as per ra), providing and fixing in position white marble plate of size 45x45x1.8 cm incl ingraving the tettera as per drawing/as direct etc complete. (irr. sor 2024-25 ch.5 it.17 pg.22)

Sand Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors