Latest sand pipe Tenders | Government sand pipe Tenders

Central Government/Public Sector

CTN :45730911

07 Jul, 2026 NA

Valsad - Gujarat

Tender For supply of set of sanding arrangement for wap7/wag-9 locomotives consisting of 03 items in 3 nos. i) guard assembly as per drgno ngp/trs/4/25.065 rev-1, qty-01no. ii) adapter for sanding arrangement as per drg. no. ngp/trs/4/25.064 rev-1,qty-01 nos. iii) holder for sander pipe as per drg no. ngp/trs/4/25.089 rev.-2 qty-01 nos. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]]

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Central Government / Public Sector

CTN :45682073

15 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of spares for modified sand pipe assembly for 3 phase locomotives. set consists of 03 items. (1) sander nozzle as per drg.no.c/els/lgd/bogie/4/158. set consists of 02 items. i)nozzle (thread pitch 1.5 mm) ref.1-01 no./set. ii) nozzle (thread pitch 2.5 mm) ref.2-01 no./set. (2) set of spares for modified sand pipe assembly, as per drg.no.c/els/lgd/ ex.ftg/3/20, alt-1, set consists of 07 items.i)support angular, ref.1-01no./set. ii)support steel flat, ref.2-01no./set. iii)delivery adopter, ref.3-01no./set. iv)hex.head bolt, ref.4-02no./set. v)hex. nut, ref.5-02no./set. vi)spring washer, ref.6-04no./set. vii)flat washer, ref.7-04no./set. (3) sand ejector dummy for 3 phase locos as per drg. no.c/els/lgd/bogie/4/159 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45670870

08 Jul, 2026 NA

Vyara - Gujarat

Tender For tender for inviting rate quotations for supply of necessary materials for nurseries and other plantation related items under vyara forest division - emitting pipe (integral drip lateral)class iii-12 mm, 1to4 lph, 30cm, 2, mtr, 13488, lldpe, emitting pipe (integral drip lateral)class iii-12 mm, 1to4 lph, 75cm, 6, mtr, 13488, lldpe, emitting pipe (integral drip lateral) -16mm-class ii-16 mm, 1to4 lph, 30cm, 10, mtr, 13488, lldpe, emitting pipe (integral drip lateral) -16mm-class ii-16 mm, 1to4 lph, 75cm, 14, mtr, 13488, lldpe, emitting pipe (integral drip lateral) -emitting pipe (integral drip lateral) -20mm-class i-20mm-class i-20 mm, 1to4 lph, 30cm, 18, mtr, 13488, lldpe, emitting pipe (integral drip lateral) -emitting pipe (integral drip lateral) -20mm-class i-20mm-class i-20 mm, 1to4 lph, 75cm, 22, mtr, 13488, lldpe, emitting pipe (integral drip lateral-pc) -16mm-class ii-16 mm, 1to4 lph, 30cm, 26, mtr, as specified, lldpe, emitting pipe (integral drip lateral-pc) -16mm-class ii-16 mm, 1to4 lph, 75cm, 30, mtr, as specified, lldpe, flush valve-40 mm, 34, no, as specified, pvc, flush valve-90 mm, 38, no, as specified, lldpe, barbed start connector / jointer /takeoff / nipple-12 mm, 42, no, as specified, pp, reducer 16 x 12 mm, 46, no, as specified, pp, end cap (line end)-12 mm, 50, no

Central Government/Public Sector

CTN :45358690

25 Jun, 2026 NA

West Godavari - Andhra Pradesh

Tender For corrigendum : supply of drip materials for annual maintenance - 90mm pvc pipes - 6m, 110mm pvc pipes - 6m, 50mm pvc pipes - 6m, 40mm pvc pipes - 6m, 16 mm x 400m lateral tube, 12 mm x 500m lateral tube, 6mm x 250m micro tube, mini spray jet 270⁰ 68lph, j-turbo keyplus dripper 8 lph, j-turbo keyplus dripper 4 lph, screen filter 25m³ - 2", screen filter 30-40m / hr 90mm³, hcf 25m3/hr63mm, hcf 50m3/hr90mmp, barbed poly joiner 16mm, barbed poly joiner 12mm, poly joiner 6mm (short), barbed goof plug 2.9mm, black dummey 6mm, screw end 20mm (1/2") th bv, screw end 25mm (3/4") th bv, screw end 32mm th bv, 1/2 brass ball valve, 3/4 brass ball valve, brass ball valve (hy), control valve 40mm moulded seal, control valve 50mm moulded seal, flush valve 40mm, flush valve 50x63 (2"), flush valve 63mm, perma fix 1l-t1, hack saw blade (dt), blades single edge, m seal 100 gm, pvc coupler 6kg/cm2 40mm lw, pvc coupler 50mm lw, pvc coupler 4kg/cm2 63mm lw, pvc coupler 4kg/cm2 75mm lw, pvc coupler 4kg/cm2 90mm lw, pvc coupler 4kg/cm2 110mm lw, pvc elbow (equal) 90mm-lw, pvc elbow (equal) 75mm-lw, elbow 63mm pn6, pvc elbow (equal) 50mm-lw, pvc elbow (equal) 40mm-lw, j-pvc tee (equal) 90mm-lw, j-pvc tee (equal) 75mm-lw, j-pvc tee (equal) 63mm-lw, j-pvc tee (equal) 50mm-lw, j-pvc tee (equal) 40mm-lw, j-pvc m.thr.adpt. 3" 90mm-lw, j-pvc m.thr.adpt. 4" 110mm-lw, j-pvc m.thr.adpt. 2.5" 75mm-lw, j-pvc m.thr.adpt. 2" 63mm-lw, p.m.t.a 50mm, p.m.t.a 40mm, j-pvc f.thr.adpt. 4" 110mm-lw, j-pvc f.thr.adpt. 3" 90mm-lw, j-pvc f.thr.adpt. 2.5" 75mm-lw, j-pvc f.thr.adpt. 2" 63mm-lw, j-pvc f.thr.adpt. 1.5" 50mm-lw, dis fta 40mm hd, bend 90mm x 04kg 90⁰, bend 75mm x 04kg 90⁰, bend 63mm x 04kg 90⁰, bend 50mm x 06kg 90⁰, bend (h) 40mm, end cap (plain)-hd 110mm, j-pvc end cap (palin) 90mm-lw, j-pvc end cap (palin) 75mm-lw, j-pvc end cap (palin) 63mm-lw, end cap (plain)-hd 50mm-lw, end cap (plain)-hd 40mm-lw, 3" gate valve, 2 1/2" gate valve, 2" gate valve, 1 1/2" gate valve, 3" delivery flange, 90mm threaded coller falnge, ss bolt nut 2washer size 1/2" x 1 1/2", ss bolt nut 2washer size 1/2" x 2", 3" flange washer, reducing flange 3" x 2 1/2", flange rubber 75mm, nipple 3" x 4", nipple 3" x 6", nipple 2 1/2" x 4", nipple 2 1/2" x 6", j-pvc reducer m/s 110 x 90mm-lw, j-pvc reducer m/s 90 x 75mm-lw, reducer 50 x 40mm, j-pvc reducer m/s 110 x 75mm-lw, j-pvc reducer m/s 75 x 63mm-lw, pvc low friction n.r. valve 90mm (3"), jet stake, sprinkler micro stake 16mm, foot valve (flap) 1", foot valve (s) 25mm, 2" section hose pipe, 2" hose coller, 2" hose clamp, 3/4" water pipe, sprinkler 110lph, inline lateral r 16mm 4 lph 40 cm, elbow 12 mm, hamali charges

State Government

CTN :45631463

25 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For quotes invited for getting drip irrigation work done in the garden of bishankhedi campus of jai university -netafilm arkal 2" dual lite disc filter 120 mesh ind ,netafilm venturi 3/3" with assly. netafim ,pres gauge ss 304-0-7 kg 4 bsp 2.5"- ind ,kinetic air valve 1" k-10 rj-ind ,plain lateral pipe pe irr. 12/2.5/1.2 mm 400 m cl-ii ind ,pc dripper 4lph (04 drippers/plant) ,micro tube for drippers pvc tube 5*3 ,pvc pipe 63mm 04kg/cm2 ,pvc pipe 50mm 04kg/cm2 ,pp ball value 1.5" (63mm) plain ind ,pvc flush value 50mm-ind ,trenching and back filling work 30cm x 30cm ,drip accessories & installation, charges ,local transport charges

CTN :45630031

04 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For dr. mvr rtpp-m12-bm&ahp-stage4-procurement of y-lateral cast iron bends and pipe to pipe sleeve assembly for bottom ash discharge lines of 600mw-reg.

Sand Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors