Latest security equipments Tenders | Government security equipments Tenders

Central Government/Public Sector

CTN :44784955

17 Apr, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

Central Government/Public Sector

CTN :44787306

17 Apr, 2026 10.00 Lacs

Yelahanka - Karnataka

Tender For providing of tentage service lumpsum based - school functions; tent rentals, furniture & equipment rentals, power supply, logistics & delivery, maintenance & support, safety measures, dismantling and removal, floorings, lighting

State Government

CTN :44389538

09 Apr, 2026 8.63 Lacs

Bharuch - Gujarat

Tender For bid to ras providing of tentage service lumpsum based - election related work; floorings, lighting, tent rentals, theme based installation, furniture & equipment rentals, power supply, safety measures, dismantling and removal, other requirement as per election work

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

corporations/Associations/Others

CTN :44762207

17 Apr, 2026 35.00 Lacs

Junagadh - Gujarat

Tender For annual rate contract for supplying water purification liquids and safety equipment including refilling and transportation of chlorine cylinder as per required of water works branch at junagadh municipal corporation area.

CTN :44768611

16 Apr, 2026 NA

Kannur - Kerala

Tender For providing of tentage service lumpsum based - hiring of services for eot activities; lighting, floorings, air conditioning, tent rentals, theme based installation, furniture & equipment rentals, power supply, maintenance & support, safety measures

CTN :44763799

15 Apr, 2026 NA

Kalahandi - Odisha

Tender For supply of fire safety equipment (sand bucket, water bucket and fire blanket)

corporations/Associations/Others

CTN :44716115

22 Apr, 2026 14.59 Lacs

Dehradune - Uttarakhand

Tender For procurement of safety and security equipment for dhakrani power house (dehradun) - procurement of safety and security equipment, caution tape reflective roll as per technical specifications, led search light 10w (range 2 km.) as per technical specifications, life jacket free size with adjustable strap, retro reflective as per technical specifications, safety helmets with ratchet type adjustable strip, colour-white as per technical specifications, safety helmets with ratchet type adjustable strip, colour-blue as per technical specifications, safety helmets with ratchet type adjustable strip, colour-yellow as per technical specifications, safety helmets with ratchet type adjustable strip, colour-brown as per technical specifications, safety helmets with ratchet type adjustable strip,colour- grey as per technical specifications, safety harness full body complete with all accessories as per technical specifications, first aid kit box mounting type with accessories as per technical specifications, retro-reflective barricade (made of pvc, water filled with interlocking feature) size 36" x 72" x 24" as per technical specifications, traffic cone 750mm, base 300 x 300 mm, with chain and hooks as per technical specifications, jute rope (length 100 m, thickness 30 mm ) as per technical specifications, jute rope (length 100 m, thickness 25 mm) as per technical specifications, rubber hand gloves reusable type made of latex rubber and slip resistant texturing cover palm as per technical specifications, wheeled waste bin with pedal opening capacity-60 ltr as per technical specifications, waste bin with pedal opening capacity- 10 ltr as per technical specifications, snake catcher stick, heavy duty, length 6 feet , metal : aluminium, as per technical specifications, safety shoes as per technical specifications, gum boot pvc yellow sole gum boot with steel toe and flexible pvc as per technical specifications, rain coat as per technical specifications, dangri one pieces as per technical specifications, fire alarm siren range 1 km single phase 220/250v as per technical specifications, locks size 60 mm ss body, 7 lever as per technical specifications, convex mirror road safety (32 inch) as per technical specifications, waterproof umbrella (47 inch) as per technical specifications, 16 feet aluminum telescopic ladder as per technical specifications, cobweb duster (3-stage aluminum telescoping pole,extendable reach 20 feet ) as per technical specifications, multifunctional tool storage box as per technical specifications, brass earthing chain (9 mtr) as per technical specifications, static discharge rod as per technical specifications, loto kit as per technical specifications, standard welding safety goggle as per technical specifications, high pressure spray pump as per technical specifications, electric ulv fogger (16 liter) as per technical specifications, aluminium 7 feet aluminum self support ladder as per technical specifications, wet & dry extractor professional vacuum cleaner as per technical specifications, professional heat gun as per technical specifications, cable operated scrubber drier as per technical specifications, high pressure cleaners as per technical specifications, grinding and cutting safety shields as per technical specifications

Central Government/Public Sector

CTN :44675899

08 Apr, 2026 7.75 Lacs

Gandhinagar - Gujarat

Tender For bid to ras providing of tentage service lumpsum based - social gatherings; floorings, lighting, air conditioning, tent rentals, theme based installation, decoration, furniture & equipment rentals, climate control, power supply, logistics & delivery, safety measures, dismant..

Security Equipments Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector