Shackles Tenders

Tender For supply of 'd' d-selected">shackles set of one each 1

Central Government/Public Sector

Tender For supply of 800mm high strength polyamide rope lifting sling with ss d-d-selected">shackles at each end

State Government

Tender For corrigendum : pulleys, wire rope slings and d d-selected">shackles for commissioning of electrical winch machine

Tender For procurement of various d d-selected">shackles for use at khaocp bellampalli area

Central Government/Public Sector

Tender For attending repair/revamping works of 03 nos. 30 ton capacity, 20 feet manual spreaders at haddo wharf in sri vijaya puram. - attending repair/revamping of 30 ton capacity, 20 feet manual spreader by dismantling of wire rope slings, d-d-selected">shackles, twist-locks, pins and bushings, wire brushing and cleaning of the spreader s corroded/dirty surfaces, identification of cracks, welding of cracks if any required of the spreader s main frame and guide plates using approved electrodes, replacement/fabrication of damaged members, grinding and finishing of welded surfaces, repair/replacement of twist-lock assemblies, pins and bushes, machining of worn-out parts to original dimension and tolerances, re-assembling of all the removed and repaired items after attending necessary welding, machining works. welding works are to be done properly in conventional method as per the direction of eic, all the items are to be aligned properly in conventional method as it was in original, checking of alignment of the spreader, complete cleaning of the entire surface of the spreader and making it rust-free, application of one coat of anti-corrosive primer and two coats of approved marine-grade enamel paint, making trial run for functionality of twist-locks, load testing the spreader, d-d-selected">shackles, wire rope slings as per the standards, certification of the tested spreader and accessories including cost of all labour charges, material charges, tools and plants, all port dues and taxes, transportation charges i.e., sending of the spreader to kolkata for carrying out repair/revamping works, load testing, certification and bringing back to haddo wharf, sri vijaya puram etc. complete.

Central Government/Public Sector

Tender For tender for supply of m10x25 gulde act nut/bolt , bolt and nut ms hex m12x50 , 5/8 inch x 90mmlstuda193grb8/8 , bolt m4x25 f304 hx fulth , bolt m5x25 f304 hx fulth , bolt m6x25 f304 hx fulth , bolt and nut ms hex m12x40 , bolt with nut m5x75mm lon , bolt m8x30 f304 hex fulth , ss hex n and b fth m8x45mm , nut and bolt m8x40mm ss304. , bolt with nut m8x50mm lon , m6 x 40 ss 304 nut plus bolt , ss hex nt and blt.f th m6x60 , ss nut bolt m10x40 , ss hex n and b fth m12x30mm l , nut bollt ss m10x30 , bolt plus nut ss 304 m10x50mm. , bolt plus nut ss 304 m12x50mm. , screw ss cheasd hd m4x60 , bolts allen head m12 x 50 mm long h , bolt allen head m8 x 30 mm long for , washer m6 ss 1.0t flat , hexagonal , nyloc nut-m8 ss , washer m8 ss 1.0t flat , bolt plus nut ss m10 x 25mm. , ss316 bolt and nut size m10 x 60 mm , bolt m10x60 f304 hx fulth , washer m10 ss 1.0t flat , washer m12 ss 1.0t flat , m12 x 40mm , ss-304 , bolt , ss hex n and b fth m8x25mm , unbrk allen screw m8x35 , allen screw c.s m-5x40mm , unbrako grub screw m4 x 10 mm long , anchor fastener m10 x90mm , hammer expn. , anchor fastener m8 x 70mm , hammer expn. , measuring tape , 5 meter-metalic , measuring tape , 15 meter-metalic , measuring tape 50me , eye bolt 8 mm. , eye bolt m10. , bolts eye as m12. , eye bolt m14. , bolts eye as m16. , d-shakle 0.5 mt , d.shakle scr 1 mt , d-shakle 2mt , d-shakle scr 3 mt , d-shackle 5 mt , chisel cold flat 5/16 x 5 inch , chisel cold 3/8 x 6 inch , chisel cold 1/2 inch x 6 inch , chisel cold flat 5/8 inch x 6 inch , chisel cold 3/4 inch x 8 inch , line tester elect 500v , screw driver elec 4 in , screw driver 6 in , screw driver 12 in , slide wrench 10 inch ged adj , star screw driver , scr dvr set taparia 812 , screw driver insulation 8 inch , screw driver insulation 10 inch , wrench adj.19x150mm-6 inch , hacksaw blade , 6 inch , hacksaw frame , 6 inch , hacksaw frame , 12 inch , hacksaw blade , 12 in , hss , nose plier 6 in , plier combination 6 inch , plier combination 8 inch , punch centre 3/16x4inch , electrician tool bag , polyster , wtrprf , d spanner set double ended 6mm to 22mm , ring spanner sets 6mm to 22mm , spanner ring set 10 to 27 mm , godrej lock 7 lever. , steel rule 12 inch , steel rule 6 inch , screw driver for gtg , needle files set , bolt plus hex nut-m12 x 100mm lg , ss304 , hand taps 2 mm hss thrd , hand taps 4mm dia , hand taps 5 mm dia , hand taps 6mm dia. , hand taps 7mm dia , hand taps 8mm dia. , hand taps 9mm dia , hand tap set hss m10 x 1 mm , hand taps 10 mm dia , hand tap set hss m12 x1.5 , hand taps 12mm dia , hand tap set hss m14 x1.5 , hand taps 14 mm dia , hand taps 16 mm dia , hand tap set hss m16 x1.5 , hand tap set hss m10 x 1.75 mm , hand tap set , 11 mm , hand tap set hss 18 x 1.5 , hand taps 18mm dia , hand tap set hss m20 x 1.5 , hand taps 20mm dia , hand tap hss m 22 x 1.5 , hand taps 22mm dia , hand tap set hss m24 x 1.5 , hand tap set hss m24 x 2 mm , hand taps 24mm dia , hand tap set , m30 , hand tap , left hand m5 , hand tap set left hand m6 , hand tap set left hand m8 , hand tap left hand m10 , tap set left hand m12 , tap set 3mm , dies 4 mm metric std hss , dies 5 mm metric std hss , dies 6 mm metric std hss , dies 7 mm metric std hss , dies 8 mm metric std hss , dies 9 mm metric std hss , die metric std.m10 x 1 , die metric std.m10 x 1.5 , die metric std.m10 x 1.75 , die metric std.m 12 x1.5 , die metric std.m 12 x1.75 , die m14x1.5 metrc std hss , die m14x2 metrc std hss , die m16 x 1.5metric std hss , die m16 x 2 metric std hss , die m18 x 1.5metric std hss , die m18 x 2.5 metric std hss , die m20 x 2.5 metric std hss , die m22x1.5 metric std hss , dies 24mm metric std hss

Central Government/Public Sector

Tender For supply of d d-selected">shackles set of one each 1 (25mm), 3/4(19mm) ,5/8 (16mm) ,1/2(12mm) with forged steel gr.80 with galvanized plated.

Central Government/Public Sector

Tender For supply of gearless hand operated pulling & lifting machine (tirfor), 3.2 tonne lifting capacity and 5.2 tonne pulling capacity with telescopic operating handle with 16.0 mm dia and 20 mtr rope length isi marked with d d-selected">shackles as per confirming to rdso specification no. ti/spc/ohe/toolpl/0992