Latest shackles Tenders | Government shackles Tenders

corporations/Associations/Others

CTN :43287647

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 1f and reassembling the dismantled spares in mill 1b - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

corporations/Associations/Others

CTN :43287648

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 2f and reassembling the dismantled spares in mill 1c - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

CTN :43301691

13 Jan, 2026 50.0 Thousand

Multi City - Telangana

Tender For procurement of socket head cap screws for repair and maintenance of lt sci motors and d-shackles for safe handling of materials at aws, rg2.

Central Government And Public Sector

CTN :43291815

02 Jan, 2026 NA

Hisar - Haryana

Tender For supply of forged shackles for general lifting purpose (v2) conforming to is/iso 2415 (q3) , polyester round slings (q4)

Central Government/Public Sector

CTN :43294143

29 Dec, 2025 NA

Bhusawal - Maharashtra

Tender For supply of d shackles of various capacities as pe [ d shackles of various capacities as per annexure-a attached, one set consists of 07 items 07 nos. the required material should be made of high tensile steel, grade 8, quenched and tempered, with a hot dipped galvanized finish. note- calibration certificate to be furnished from a government approved laboratory alongwith material.]

Central Government/Public Sector

CTN :43266937

03 Jan, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of chain sling 1 leg, hook,l-5m,swl-10mt , chain sling 3 leg, hook, l-2m,swl-5mt , bow shackles 9. 5 mt , bow shackles, 17 mt , polyester duplex flat web sling 6 mtr capacity-4 ton , polyester duplex flat web sling 10 mtr capacity-8 ton , polyester duplex flat web sling 10 mtr capacity-10 ton , polyester duplex flat web sling 10 mtr capacity-12 ton

Central Government/Public Sector

CTN :43141317

26 Dec, 2025 1.00 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of rigging materials - 8mm dia pp rope. as per iso 1346 - 2021. , 12mm polypropelene rope as per iso 1346 - 2021. , polypropelene rope 24mm dia as per iso 1346 - 2021. , gmsld shackles 1 1 by 8 inch dia 4 tons capacity. , steel measuring tape 3mtr -make freemans , steel measuring tapes 15 mtrs make freemans , steel measuring tape 50mtr.

Central Government/Public Sector

CTN :42959713

29 Dec, 2025 NA

Bhusawal - Maharashtra

Tender For corrigendum : supply of d shackles of various capacities as pe [ d shackles of various capacities as per annexure-a attached, one set consists of 07 items 07 nos. the required material should be made of high tensile steel, grade 8, quenched and tempered, with a hot dipped galvanized finish. note- calibration certificate to be furnished from a government approved laboratory alongwith material.]

Central Government/Public Sector

CTN :43172484

27 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of 1 - 188060290000 - grinding wheels od300x tk 50 x bore 50. 8 - as per unpriced bid , 2 - 188011080000 insert lncx 1806 azr11 - as per unpriced bid , 3 186513990000 - electric straight die grinder set - as per unpriced bid , 4 - aa7248105082 - dee shackles-grade 80 - 4. 75mt - as per unpriced bid , 5 - aa7248105119 - dee shackles-grade 80 - 9. 5mt - as per unpriced bid , 6 aa7248105201 - dee shackles-grade 80 - 25mt - as per unpriced bid

CTN :43236742

12 Jan, 2026 5.93 Lacs

Bokaro - Jharkhand

Tender For providing of hiring of third-party inspection agency - different kind of slings, chains, d shackles, lifting tackles, compressor reservoirs, etc; to be entered by buyer as per domain; the chief inspector of factories, government of jharkhand, in accordance with r..

Shackles Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors