Web Analytics Made Easy - StatCounter

Shrink Sleeve Tenders

Get complete information related to latest Shrink Sleeve Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Shrink Sleeve Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Shrink Sleeve Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45731851 Due date: 14 Jul, 202614 Jul, 2026 NA
Tender For supply of traction transformer complete with cooling system & accessories like h.t cable along with protection shield in passenger compartment and under frame area, thermostat etc. related protection equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories including oil pump, oil cooling blowers etc. as per clause 4.1 rdso specification (one set per basic unit) [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45719289 Due date: 07 Jul, 202607 Jul, 2026 4.56 Lacs
Tender For running and maintenance of pumps under sub-division no.iv, nacd, apwd, mayabunder. sub work - supply of spares for water pump sets at pokkadera pump house, lucknow pump house, lucknow filter ned, karmatang-ix pump house, karmatang-x pump - supply of pump shaft with lock & key of make : kirloskar, supply of impeller adjustment nut of make : kirloskar, supply of lock washer with nut of make : kirloskar, supply of sleeve of make : kirloskar, supply of impeller first stage of make : kirloskar, supply of impeller second stage of make : kirloskar, supply of rubber o ring set of make : kirloskar, supply of bullet coupling of make : kirloskar, supply of grease packing 10 mm of make : kirloskar, supply of bearing 6307 of make : kirloskar, supply of bearing 3307 of make : kirloskar, supply of air pipe of make : kirloskar, supply of air valve of make : kirloskar, supply of pump shaft with lock & key of make : kirloskar, supply of impeller adjustment nut of make : kirloskar, supply of lock washer with nut of make : kirloskar, supply of sleeve of make : kirloskar, supply of impeller first stage of make : kirloskar, supply of impeller second stage of make : kirloskar, supply of rubber o ring set of make : kirloskar, supply of bullet coupling of make : kirloskar, supply of bearing 6307 of make : kirloskar, supply of engine oil filter of make : kirloskar, supply of diesel filter stage i of make : kirloskar, supply of diesel filter stage ii of make : kirloskar, supply of fan belt of make : kirloskar, supply of air filter of make : kirloskar, supply of engine oil filter of make : kirloskar, supply of diesel filter stage i of make : kirloskar, supply of diesel filter stage ii of make : kirloskar, supply of fan belt of make : kirloskar, supply of air filter of make : kirloskar, supply of engine oil filter of make : kirloskar, supply of diesel filter stage i of make : kirloskar, supply of diesel filter stage ii of make : kirloskar, supply of fan belt of make : kirloskar, supply of air filter of make : kirloskar

Private Sector

CTN :45739128 Due date: 10 Jul, 202610 Jul, 2026 NA
Tender For supply of m3342999602 - vg 80 - 300 plus tch plus n - coupling set - od 220 , m3342999603 - vg 80 - 300 plus tch plus n - brg bed - top - - p35 point 152a , m3342999604 - vg 80 - 300 plus tch plus n - brg bed - bottom - p35 point 152 , m3342999613 - vg 80 - 300 plus tch plus n - delivery pipe - p72 point 052 , m3342999621 - vg 80 - 300 plus tch plus n - single shaft , m3342999628 - vg 80 - 300 plus tch plus n - laybrinth , m3342999615 - vg 80 - 300 - tch - n - impeller plusnut p24 point 2 - 93 point 4 , m3342999612 - vg 80 - 300 plus tch plus n - strainer - p63 point 03 , m3344846000n - vg 100 - 400 plus tch plus n - comp point pump assy , m3344846003 - vg 100 - 400 plus tch plus n - single shaft , m3344846024 - vg 100 - 400 plus tch plus n - strainer , m3344846028 - vg 100 - 400 plus tch plus n - impeller , m3342136004 - vg 100 - 500 plus tps - 5vo - bush housing - 17 point 3 , m3342136014 - vg 100 - 500 plus tps - 5vo - single shaft - 22 point 352 , m3342136031 - vg 100 - 500 plus tps - 5vo - strainer - 63 point 03 , m3342136000 - vg 100 - 500 plus tps - 5vo - comp pump assy , m3342136006 - vg 100 - 500 plus tps - 5vo - impeler , m3342136010 - vg 100 - 500 plus tps - 5vo - shaft sleeve - 53 point 5 , m3342726026 - 4ad14 - coupling set - ba seal water pump , m3344516011 - mf 300 - 320 - oil seal , m3342140969 - model ars 80 - 340 - sleeve - 12

Central Government/Public Sector

CTN :45713835 Due date: 18 Jul, 202618 Jul, 2026 30.00 Lacs
Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45714895 Due date: 18 Jul, 202618 Jul, 2026 NA
Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

Central Government/Public Sector

CTN :45498219 Due date: 10 Jul, 202610 Jul, 2026 NA
Tender For corrigendum : supply of fp9750683030 booster pump for cvp singrauli , fp9750683030 booster pump for cvp sipat , fp9750683501 impeller with nuts and accessories , fp9750683510 impeller shaft with keys , fp9750683528 shaft sleeve , fp9750683536 wearing ring impeller , fp9750683544 wearing ring casing , fp9750683552 sleeve bearings for pump , fp9750683560 thrust bearing , fp9750683579 pump and drive motor coupling assembly , fp9750683587 pump to drive motor coupling bushes , fp9750683595 gland assembly mech seal , fp9750683609 motor for lubrication pump

corporations/Associations/Others

CTN :45715512 Due date: 14 Jul, 202614 Jul, 2026 17.94 Lacs
Tender For tender for supply of coupling key part no 01 for beacon weir secondary raw water pump , shaft nut part no 03 for beacon weir secondary raw water pump , o ring water thrower , part no 8 for beacon weir secondary raw water pump , lantern ring , part no 16 for beacon weir secondary raw water pump , distance piece , part no 18 for beacon weir secondary raw water pump , stuffing box bush part no 19 for beacon weir secondary raw water pump , impeller key part no 24 for beacon weir secondary raw water pump , pipes , part no 25 for beacon weir secondary raw water pump , coupling bush for beacon weir secondary raw water pump , coupling pin for beacon weir secondary raw water pump , shaft sleeve fam for beacon weir secondary raw water pump , gland plate for beacon weir secondary raw water pump , crw pumps jtc-33cl/1 stage pum for beacon weir secondary raw water pump , water thrower , part no 7 for beacon weir secondary raw water pump , grease nipple for beacon weir secondary raw water pump , bearing housing de part no 04 for beacon weir secondary raw water pump , bearing housing nde part no 12 for beacon weir secondary raw water pump , stud bolt with nut m12x80 part no 26 for beacon weir secondary raw water pump

Central Government/Public Sector

CTN :45716157 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For supply of pvc tube heat shrinkable sleeve c c - mh42500020210500 pvc tube , mh42500020210100 heat shrinking marker sleeves black , mh42500020210101 heat shrinking marker sleeves blue , mh42500020210102 heat shrinking marker sleeves transparent , mh42502018019030 silicon rubber attenuator , mh42500002010600 nylon tube

CTN :45700286 Due date: 15 Jul, 202615 Jul, 2026 NA
Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :45743856 Due date: 08 Jul, 202608 Jul, 2026 NA
Tender For supply of o.f.c. jointing kit for 24 fiber cable 9mm core dia with suitable heat shrink sleeves as per rdso spec np. rdso/spn/tc/68/2014 or latest [ warranty period: 30 months after the date of delivery ] ]
 Loading, Please wait...

Connect us via What's Up