Latest shunting contactor Tenders | Government shunting contactor Tenders

Central Government/Public Sector

CTN :45736905

13 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of set of support plate for shunting contactor as per clw drg. no. 2twd.111.076a alt-4. [ warranty period: 30 months after the date of delivery ] ]

CTN :45737174

21 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of shunting contactor tips fixed and mobile to clw drg. no. 3twd/111/051, alt-8 and confirming to specification 4tes.111.029 alteration-2 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45714279

09 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of flexible shunt for shunting contactor as per clw drawing no 3twd.111.062,alt-a or latest if any [ warranty period: 30 months after the date of delivery ] ]

CTN :45727896

16 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of spring of moving control lever for shunting contactor as per clw drg no. 4twd.111.046a alt.2 [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45696549

06 Jul, 2026 NA

Krishnanagar - West Bengal

Tender For selection of local market rate for various items of work forpreparation of scheme estimate for implementation ofmgnrega & vbgramg schemes. --thermocol 12.5 mm thick., polythene sheet (150 gm per sqm)150 microns (or 0.15 mm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank (without prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank(with prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank( with prop (30mm 37 mm ) including all fittings ., hire charges of vibrator (needle type 40 mm), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail (size1" to 2.5"), 1220. wire mesh (rabbit), glue (fevicol), 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates(size 5mm to 10mm), unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs)(specification- as per amc including fitting & fixing), display board(community)(specification- as per amc including fitting & fixing), g.i. wire(weight 100 mtrs/. kg), coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior) normal, cement primer(exterior)water proof, primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings conforming to is-13592-1992 (a) (i) single socketed 3 meter length (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings conforming tois:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete. a) upvc pipes: (ii) 110 mm. dia., b) upvc fittings: a) plain tee (ii) 110 mm. dia., d) shoe (ii) 110 mm. dia, colour interlock c.c paver block ( 60 mm thick interlocking designer concrete paver block m-35 grade ), precast chequered cement tiles 22 mm thick dark shade using, precast chequered cement tiles 22 mm thick medium shade, upvcbend 87.50, 110 mm bend, upvc pipe clip 110 mm bend, check valve 32mm, check valve 40mm, bamboo 25 mm dia 2.5 meter long, bamboo ( 8 cm- 10 cm dia) including fixing, polyethylene water storage tank with cover and suitable locking arrangement ., supply of g. i. pipes of tata make including necessary sockets - 15 mm dia.(medium quality), supply of g. i. pipes of tata make including necessary sockets - 25 mm dia.(medium quality), chlorinated polyvinyl-chloride(cpvc) pipe 25mm outer dia., chlorinated polyvinyl-chloride(cpvc) pipe 15mm outer dia., 15 mm ptmt bib cock, ptmt push cock 15 mm dia, mirror of superior make glass 60x45 cm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (withfittings, accessories and flush pipe), upvc pipes (w

CTN :45702689

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfc-1.bin no- 7.exmp.06.2026-27.08 description- scrap copper lump & sheets (comprising of fire bronze pieces, plats, stays, rivets, stude, rods, pipe etc) copper wire without insulation. copper boring & turning. our offer:- scrap copper miscellaneousllaneous with or without iron attachment. such as- rt dropper clip, catenery clip,contact tips for cgr (only copper), contact liver for cgr, bus bar, copper boring, plier, flexible shunt and mobile contact, scrap copper pipe,transformer oil cooler tube, rectifier bus bar , loop copper pipe, loader unloader pipe for a/c, half round oval contact copper, finger contact, stud bolt, copper ferule, carbon brush copper pigtail, copper tube, blow out coil for line contactor, r b shunt, shunt for armeter, blow out coil for shunting contactor, battery isolation switch, copper connecting angle, copper briddle wire, ptfe neutral section runner, section insulator runner, copper tubular terminal, discharge valve, copper socket, set of electrode & nozzle & other copper miscellaneousllaneous in bin no-7. qty=3686 kgs. loading will be done by purchaser's own arrangement.

Central Government/Public Sector

CTN :45682903

09 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of springs for ep contactors consisting of 02 items as follows (1) spring for shunting contactor as per clw drg.no. 4twd.111.047a with latest alteration - qty - 100 nos / set (2) spring for motor contactor as per clw drg. no. 4twd.112.029a with latest alteration - qty - 30 nos / set [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45645873

30 Jun, 2026 NA

Kalyan - Maharashtra

Tender For auction sale of rolling stock - condemned electric loco no. wcam/2p no- 21865, with iron, steel along with all types of ferrous and non-ferrous materials along with waste. r/items - nil items removed for departmental use: a. smoothing reactor sl-30- (02 nos) b. ba frame -02 nos (ctf, reverser, copper busbar, l1-l6 contactor, c-145, shunting contactor, copper pipe, rs1&2. c. transformer with tap changer, radiator etc ( 01 no) d. rps (01 no) e. inhibited tfp oil. f. atfex-01 nos. g. aux machines (mph) 01 nos. h. spares of siv. i. different released relays-50 nos. j. battery charger and other electronic items-01 no. remark: 1. electric loco is sold on as is where is basis along with wheel sets and trolleys. 2. lot no is painted on the loco. 3. lot is sold on number basis. 4. approach road is available up to the lot. 5. cutting is allowed for easy loading. 6.loco is at present placed in kalyan els yard behind the old auxiliary section in the custody of sse/store/trs/els/kalyan and at the time of handing over loco will be placed on suitable cutting line at els/kalyan. 7. stock holder will be fully responsible for any addition, deletion, alteration, and variation after joint inspection report. 8. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep fire safety equipment/items i.e. water/sand/fire extinguisher etc. at the cutting site. 10. lots are ok for sale on above observations. note:- purchaser should ensure to clean the cutting line premises of scrap loco before final delivery. location : lying at els/kyn stock holder : sse/store/els/trs/kyn

Central Government/Public Sector

CTN :45237236

24 Jun, 2026 NA

Patti - Punjab

Tender For bid to ras corrigendum : supply of main bearing set 08 nos , big end bearing 06 nos , crank thrust washer 03 nos , piston ring std set , cylinder sleeve set 03 nos , engine overhelluing gasket set , head gasket , connecting rod bolt , connecting rod bush 03 nos , inlet vlave 06 nos , exhaust valve 06 nos , valve guide inlet and exhuast , valve seat inlet and exhuast , valve oil seal inlet and exhaust , valve quarter lock , hydraulic lash adjuster hla , main oil seal rear , timing cover oil seal front , timing chain assy , timing chain adjuster pad , timing chain tensioner assy , crank timing gear front , belt set comp , clutch plate , pressure plate , release bearing hydrulic , pilot bearing , fly wheel assy , differeantial exhaust pressure pipe upper steel , differeantial pressure sensor rubber pipe , sensor differeantial pressure , self starter mounting patti dust shield clutch , abs sensor , fuel pump assy fuel module , bms sensor of battery terminal , rail pressure sensor , oil pressure sensor , invoirment atmosphere sensor ambient tempreature sensor , injector nozzle brash wahser winh o ring , diesel filter , air filter , oil filter , wheel cylinder assy rear , belt tensioner assy pulley idler , turbo charger nut and bolt , anna bond tube big size black , wd 40 spray big size , enginecleaning brush big and small , araldite tube , bolt 12 no with nut , bolt 10 no with nut , turbo charger assy , front disc brake pad , dosing nozzle clamp with 10 no bolt , turbo charger clamp with set packing , thermostat assy , tappet cover flat seal ring , water pump gasket ) /bid number : gem/2026/b/7555683 * /dated: 18-05-2026 & & / bid document 1 / 42

Central Government/Public Sector

CTN :45644556

23 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of set of support plate for shunting contactor as per clw drg. no. 2twd.111.076a alt-4. [ warranty period: 30 months after the date of delivery ] ]

Shunting Contactor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector