Latest sinter gate repair Tenders | Government sinter gate repair Tenders

Central Government/Public Sector

CTN :45263257

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply of uhv deposition chamber - uhv chamber specification (vacuum better than 2 10-9 mbar uhv) chamber overview spherical (diameter 14 ) or equivalent square shaped uhv chamber with support frame equipped with three (3) x 2-inch magnetron sputtering sources. all cf flanges and uhv viewports/ss blanks, three (3) x 2-inch magnetron sputtering sources. each sputtering source has an individual gas inlet line for process gases. all cf flanges., substrate holder : diameter: 2 inches; heating molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature to 1000 c without rotation. rotation: substrate holder can rotate continuously, driven by a stepper motor. variable speed from 0 to 10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to the substrate surface, tilt adjustable. two sputtering sources mounted confocally at an angle relative to the substrate. base pressure: lower than 2 10 mbar (ultra-high vacuum)., vacuum pumping system: turbo molecular pump: pfeiffer hipace300 / edwards next 300 / leybold turbovac 350i with cf100 flange or equivalent with integrated controller, ion pump with controller: included to maintain uhv vacuum levels and provide clean pumping., backing pump: pfeiffer hiscroll 12 / edwards nxds 15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves : one cf100 and one cf150 manual gate valves for isolating the chamber from the pumping systems as well as throttling, vacuum gauges and measurement: one cold cathode gauge with readout capable of measuring vacuum pressures down to1 10-10 mbar for precise uhv monitoring., one capacitance manometer gauge with measurement range from 1 10-1 to 1 10 mbar for accurate pressure reading during deposition phase, gas delivery system: two independent mass flow controllers (mfcs):a. one mfc (0-100 sccm) for argon gas feeding to all three sputtering sources via high vacuum valves.b. one mfc (0-100 sccm) for nitrogen gas feeding directly into the chamber with its own high vacuum valve.gas lines for ar and n2 are physically separated to avoid cross-contamination., chamber access and viewports: 1. two view ports installed on the chamber, each equipped with manual shutters. 2. access ports for gauges, pump, gas inlet and few spares for future upgradation., baking capability: entire chamber designed to bake-out at 150 c to reduce contamination and out gassing during operation, cooling capability : water manifold with flow switch / flow meters, near uhv chamber specification: chamber overview: spherical (diameter 14 ) or equivalent square shaped uhv chamber with stand., three 2-inch magnetron sputtering sources, each with individual gas inlet. all cf flanges and uhv viewports/ss blanks., substrate holder: a. diameter: 2inches; heating : molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature (rt) to 1000 c without rotation b. rotation : substrate holder driven by stepper motor. variable speed from 0 to10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to substrate surface (tilt able preferred). two sputtering sources mounted confocally at an angle. base pressure : lower than 5 10 mbar (near uhv)., vacuum pumping system: turbo molecular pump : pfeiffer hipace 700 / edwards next 730 / leybold turbo vac 900 ix or equivalent with cf100 flange and integrated controller, suitable for near uhv vacuum., backing pump: pfeiffer hi scroll 12/edwards nxds15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves: one cf150 manual gate valve to isolate / throttle chamber from pumping system, vacuum gauges and measurement: cold cathode readout capable of dis

State Government

CTN :45341891

03 Jun, 2026 NA

Delhi - Delhi

Tender For improvement of water supply by p/l 100 mm dia di water line from main gate pocket-a to 2a krishna enclave phase-3, ashok vihar in ward-66 (wazirpur) in wazirpur constituency ac-17 under ee ( c )-18

Central Government/Public Sector

CTN :45096410

03 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For corrigendum : consultancy services for prep of arch dwg,struct des,mep services for the work of renovation works of olhc incl remodelling of entrance gate,lecture hall,dev of canteen area,renovation of oat,roof treatment and imp of water supply in iit(ism) dhanbad

State Government

CTN :45330287

22 Jun, 2026 7.64 Lacs

East Nimar - Madhya Pradesh

Tender For work contract for extension of hpcf room eot hoist rail, fabrication of platform at debris filters, replacement of service water line, installation of gate valves in hvac plant, fabrication of cabin and various racks, fabrication of mot tube bundle

Central Government And Public Sector

CTN :45346164

12 Jun, 2026 2.35 Lacs

Bangalore - Karnataka

Tender For miscellaneous civil works like gate repair shifting of wooden logs unserviceable materials and cutting of dead branch of a tree water tanks cleaning water supply connection to all over head tanks from ug sump etc at cgmt compound halasuru

Corporations / Associations / Others

CTN :45324349

29 May, 2026 NA

Mumbai - Maharashtra

Tender For appointment of debris removal and contract minor repair work (plumbing repair work, water tank, tank, gate repair work, window repair work, etc.) fencing work around hbt deendayal upadhyay maidan hbt poiser kandivali (east) in r/south ward

CTN :45314283

29 Jun, 2026 20.00 Lacs

Morena - Madhya Pradesh

Tender For procurement of water supply materials as per demand — ulub municipal council, joda - work of for several work as per demand in ulb, ac pressure pipe 10 inch as per nit, ac pressure pipe 8 inch as per nit, ac pressure pipe 6 inch as per nit, ac pressure pipe 4 inch as per nit, ac pressure pipe 3 inch as per nit, gi pipe 4 inch as per nit, gi pipe 3 inch as per nit, gi pipe 2 inch as per nit, pvc pipe 4 inch as per nit, pvc pipe 3 inch as per nit, pvc t 2 inch as per nit, pvc t 3 inch as per nit, pvc t 4 inch as per nit, gi band 2 inch as per nit, gi band 3 inch as per nit, gi band 4 inch as per nit, gi band 6 inch as per nit, gi elvo 02 inch as per nit, gi elvo 03 inch as per nit, gi elvo 04 inch as per nit, gi socket 2 inch as per nit, gi socket 3 inch as per nit, gi socket 4 inch as per nit, gi socket 6 inch as per nit, siluce valv 2 inch as per nit, siluce valv 3 inch as per nit, siluce valv 4 inch as per nit, siluce valv 6 inch as per nit, telpice ci 3 inch as per nit, telpice ci 4 inch as per nit, telpice ci 6 inch as per nit, telpice ci 8 inch as per nit, reduicer ci 02*03 inch as per nit, reduicer ci 03*04 inch as per nit, reduicer ci 03*06 inch as per nit, reduicer ci 03*08 inch as per nit, reduicer ci 08*04 inch as per nit, e-band ci 3 inch as per nit, e-band ci 4 inch as per nit, e-band ci 6 inch as per nit, e-band ci 8 inch as per nit, nut bolt 1.5 inch as per nit, nut bolt 4 inch as per nit, nut bolt 6 inch as per nit, nut bolt 8 inch as per nit, nut bolt 10 inch as per nit, starter bentax 15 hp as per nit, starter bentax 20 hp as per nit, panel borad complete as per nit, starter oil per liter as per nit, main switch 63 amp with cut out as per nit, claimb all size as per nit, cable 04 mm copper as per nit, cable 06 mm copper as per nit, summbersible motor pump 7.5 hp as per nit, summbersible motor pump 10 hp as per nit, d joint with rubber ring complete 3 inch as per nit, d joint with rubber ring complete 4 inch as per nit, d joint with rubber ring complete 6 inch as per nit, d joint with rubber ring complete 8 inch as per nit, d joint with rubber ring complete 10 inch as per nit, autocut, non reutrn valve 3 inch as per nit, non reutrn valve 4 inch as per nit, flench ci 3*4 inch as per nit, flench ci 4*4 inch as per nit, flench cut wali 03*04 inch as per nit, flench cut wali 04*04 inch as per nit, rubber flench 3 inch as per nit, rubber flench 4 inch as per nit, rubber flench 5 inch as per nit, dent ci all type 3 inch as per nit, dent ci all type 4 inch as per nit, dent ci all type 6 inch as per nit, union shocket 2 inch as per nit, nipple 03*24 inch as per nit, valve iron 2 inch as per nit, valve pital 2 inch as per nit, flench gi 2 inch as per nit, t ci 3 inch as per nit, t ci 8 inch as per nit, gate valce 2 inch as per nit, galen 3 inch as per nit, galen 4 inch as per nit, sada water toti plastic as per nit, pvc water tank 500 liter as per nit, pvc water tank 1000 liter as per nit, single phase motor 1 hp as per nit, single phase motor 1.5 hp as per nit, ringga 1 inch as per nit, motor tuchan as per nit, pannel board 50 number as per nit, pannel board 60 number as per nit, ringga nojal 1 inch as per nit, ringga nojal 1.25 inch as per nit, pvc pipe 8t half inch as per nit, pvc elvo half inch as per nit, pvc socket half inch as per nit, brass elvo half inch as per nit, brass socket half inch as per nit, tape nipple half inch as per nit, t half inch as per nit, brass t half inch as per nit, pvc pipe 8t 1 inch as per nit, pvc elvo 1 inch as per nit, pvc socket 1 nch as per nit, brass elvo 1 inch as per nit, brass socket 1 inch as per nit, tape nipple 1 inch as per nit, t 1 inch as per nit, brass t 1 inch as per nit, pvc pipe 8t 0.75 inch as per nit, pvc elvo 0.75 inch as per nit, pvc socket 0.75 nch as per nit, brass elvo 0.75 inch as per nit, brass socket 0.75 inch as per nit, tape nipple 0.75 inch as per nit, t 0.75 inch as per nit, brass t 0.75 inch as per nit, pvc pipe 1.25 inch as pernit, steel toty as per nit,

CTN :45342865

04 Jun, 2026 4.13 Lacs

Prakasam - Andhra Pradesh

Tender For markapuram municipality- general funds - supply & required pws materials and resources for maintenance of di pumping main from dupadu ss tank to markapuram head water works, supply of 100mm dia di sluice gate valves, 110mm dia collars and required resources for maintenance of hdpe distribution pipeline in markapuram municipality.

CTN :45325576

03 Jun, 2026 208

Multi City - Karnataka

Tender For annual rate contract tender for supply of water supply pvc and cpvc materials for haragadde gram panchayat for the year 2026-27 - item name - hdpe pipes (pe100-pn6.0) 63mm dia conforming to is 4984-2016, item name - ef reducer coupler 90mm x75mm, item name - ef reducer coupler 75mm x63mm, item name - elctro fusion elbow 125mm, item name - elctro fusion elbow 110mm, item name - elctro fusion elbow 90mm, item name - elctro fusion elbow 75mm, item name - elctro fusion elbow 63mm, item name - elctro fusion coupler 125mm, item name - elctro fusion coupler 110mm, item name - elctro fusion coupler 90mm, item name - elctro fusion coupler 75mm, item name - elctro fusion coupler 63mm, item name - ef reducer coupler 125mmx110mm, item name - ef reducer coupler 110mmx90mm, item name - ef reducer coupler 90mmx75mm, item name - ef reducer coupler 63mmx50mm, item name - road cutting machine, item name - ppr fusing machine, item name - electro fusion machine, item name - hdpe mta 20mm, item name - hdpe mta 90mm, item name - hdpe mta 75mm, item name - hdpe mta 63mm, item name - ms flang 2.5inch, item name - 50mm dia air valve, item name - elctro fusion tee 125mm, item name - elctro fusion tee 110mm, item name - elctro fusion tee 90mm, item name - elctro fusion tee 75mm, item name - elctro fusion tee 63mm, item name - hdpe flange 20mm, item name - hdpe flange 90mm, item name - hdpe flange 75mm, item name - hdpe flange 63mm, item name - hdpe pipes (pe80-pn6.0) 20mm dia conforming to is 4984-2017, item name - hdpe pipes (pe80-pn6.0) 90mm dia conforming to is 4984-2016, item name - hdpe pipes (pe100-pn6.0) 75mm dia conforming to is 4984-2016, item name-cpvc gum 29ml, item name-brass nrv 75mm , item name-brass nrv 1.5 inch, item name-brass nrv 2.5 inch, item name-cpvc pipe 75 mm, item name-cpvc pipe 1 inch, item name-cpvc pipe 1.5 inch, item name-cpvc pipe 2 inch, item name-cpvc pipe 2.5 inch, item name-cpvc elbow 75 mm, item name-cpvc elbow 1 inch, item name-cpvc elbow 1.5 inch, item name-cpvc elbow 2 inch, item name-cpvc elbow 2.5 inch, item name-cpvc caller 75 mm, item name-cpvc caller 1 inch, item name-cpvc caller 1.5 inch, item name-cpvc caller 2 inch, item name-cpvc caller 2.5 inch, item name-cpvc fta 75mm, item name-cpvc fta 1 inch, item name-cpvc fta 1.5 inch, item name-cpvc fta 2 inch, item name-cpvc fta 2.5 inch, item name-cpvc mta 75 mm, item name-cpvc mta 1 inch, item name-cpvc mta 1.5 inch, item name-cpvc mta 2 inch, item name-cpvc mta 2.5 inch, item name-cpvc tee 75mm, item name-cpvc tee 1 inch, item name-cpvc tee 1.5 inch, item name-cpvc tee 2 inch, item name-cpvc tee 2.5 inch, item name-cpvc with brass caller 75mm, item name-cpvc reduser 75 inch, item name-cpvc reduser 1 inch, item name-cpvc reduser 1.5 inch, item name-cpvc reduser 2 inch, item name-cpvc reduser 2.5 inch, item name-cpvc gate wall 75 mm, item name-cpvc gate wall 1 inch, item name-cpvc gate wall 1.5 inch, item name-cpvc gate wall 2 inch, item name-cpvc gate wall 2.5 inch, item name-end cap cpvc 75 mm, item name-end cap cpvc 1 inch, item name-end cap cpvc 1.5 inch, item name-end cap cpvc 2 inch, item name-end cap cpvc 2.5inch, item name-cpvc solvent 118 100ml, item name-cpvc solvent 100ml, item name-gi union 2 inch, item name-gi tee 2 inch, item name-gi coller 2 inch, item name-rinch spanner adjustable 8 inch, item name-rinch spanner adjustable 10 inch, item name-rinch spanner adjustable 12 inch, item name-taparia screw driver, item name-taparia cutting player, item name-axel blad, item name-pvc tap, item name-ss tap, item name-gi tap, item name-brass nrv 1 inch, item name-brass nrv 1.5 inch, item name-brass nrv 2 inch, item name-brass non reton wall(nrv) 2.5 inch, item name-pvc pipe 75mm, item name-pvc pipe 1 inch, item name-pvc pipe 1.5 inch, item name-pvc pipe 2 inch, item name-pvc pipe 2.5 inch, item name-pvc elbow 75mm, item name-pvc elbow 1 inch, item name-pvc elbow 1.5 inch, item name-pvc elbow 2 inch, item name-pvc elbow 2.5 inch, item name-pvc caller 75mm, item

CTN :45334268

02 Jun, 2026 1.32 Crore

Shimla - Himachal Pradesh

Tender For construction of retaining wall, ug water tank, pathway from main gate to school building and related electrical work at kendriya vidyalay, keylong, lahaul & spiti (hp).

Sinter Gate Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector

Corporations / Associations / Others