Latest sleeve coupling Tenders | Government sleeve coupling Tenders

corporations/Associations/Others

CTN :45722326

14 Jul, 2026 NA

Sant Kabirnagar - Uttar Pradesh

Tender For supply of general engineering item - ss 304 wire mesh size 2390 x 990 mm 18 mesh 24 swg , multi crowned geared coupling size ed2200 as per sample , emery cloth tape rough grit 60 size 2 inch x 50 meter , emery cloth tape medium grit 80 size 2 inch x 50 meter , emery cloth tape fine grit 80 size 2 inch x 50 meter , gi screw size 1 3 by 8 inch , gi wire 22 gauge , oil seal size 80 x 110 x 10 mm , oil seal size 80 x 110 x 12 mm , oil seal size 65 x 30 x 10 mm , oil seal size 50 x 72 x 8 mm , oil seal size 50 x 80 x 10 mm , oil seal size 43 x 63 x 10 mm , oil seal size 60 x 80 x 10 mm , oil seal size 55 x 70 x 8 mm , oil seal size 120 x 150 x 13 mm , oil seal size 75 x 95 x 10 mm , oil seal size 130 x 160 x 12 mm , oil seal size 72 x 90 x 10 mm , neoprene rubber o ring size 4 mm , neoprene rubber o ring size 5 mm , virgin ptfe rod od 50 mm length 1000 mm , virgin ptfe rod od 75 mm length 1000 mm , high pressure hydraulic hose assembly one straight 1,5 inch , high pressure hydraulic hose assembly one straight 1 inch , high pressure hydraulic hose assembly one straight 0.75 inch , retaining compound grade 641 equivalent , high tensile hex head bolt with nut size m16 x 75 mm , high tensile hex head bolt with nut size m8 x 50 mm , high tensile hex head bolt with nut size m6 x 50 mm , high tensile socket head cap screw size m16 x 150 mm , high tensile socket head cap screw size m12 x 80 mm , high tensile socket head cap screw size m10 x 50 mm , tyre coupling complete set size f60 , gear coupling size fgc5 , pin bush coupling size urb162 , polyurethane snap wrap coupling element size sw280 , pin bush coupling size urb198 , brass wire netting back liner size 4800 x 1150 mm wire diameter 1.25 mm mesh 4 , brass wire netting sandwich screen size 4800 x 1150 mm , annealed brass working liner thickness 0.55 to 0.60 mm , rubber cord size 13 x 16 x 17 mm roll length 25 meter * /bid number : gem/2026/b/7722353 + /dated: 29-06-2026 ' ' / bid document 1 / 41

CTN :45707130

17 Jul, 2026 1.35 Crore

Mehsana - Gujarat

Tender For supply of jyoti make spares of vt and hscf pump for modhera, motidav and rasalpur pumping stations of modhera-dharoi pipe line project.(with buyback). - top shaft with sleeve, line shaft no.1 with sleeve, line shaft no.1 with sleeve, impiler shaft with sleeve, impiler shaft sleeve, impelier wear ring (de+nde), bering housing for thordon bearing, muff coupling, bering no-de, bering no-nde, providing spares for vt pump make: jyoti, serial n27943,n27946 & n27947, capacity: 3400 m3/hr., head - 96 m, rmp-960, l.p.m. 56667, type: 500hs style : ip419-145 with buy back sat motidav pumping station for modhera-dharoi pipeline project., top pump shaft, pump shaft sleeve, impeller wear ring ( de+nde), gunmetal bush ( rubber bush with sleeve coupling), bering no-de, bering no-nde, providing spares for vt pump make: jyoti, serial n27936,n27337, n27939 & n27940, capacity: 5100 m3/hr., head - 56 m, rmp-992, l.p.m. 85000, type: 600hs style : ip419-146 with buy back sat rasalpur pumping station for modhera-dharoi pipeline project., top pump shaft, pump shaft sleeve, impeller wear ring ( de+nde), gunmetal bush ( rubber bush with sleeve coupling), bering no-de, bering no-nde

CTN :45692588

02 Jul, 2026 16.49 Lacs

Jamtara - Jharkhand

Tender For water treatment plant cleaning,purchasing of equipments for wtp, laying of di pipes and sluice valves, construction of sv chamber and phed esr repairing for jamtara nagar panchayat. - labour for site clearance -do--e/i, desilting the supply well, intake well /head works, sump of water supply /sewerage works etc. in wet or dry condition including lifts upto 9 m and lead upto 150m as required beyond the work site,stacking, spreading, including necessary guarding, etc. complete, as directed by e/i, supplying and laying of rapid sand gravity filter sand, supplying and laying of rapid sand gravity filter gravel, supplying of bamboo for scaffolding works, supplying of narial ropes for binding works submersible pump set, requirement of plumber class-ii for opening & closing of valve & other related works, requirement of electrician grade-ii for making required connections & other related works, hiring of different tools,chain pulley & tackles for cleaning & other works, disposal of excavated earth & filter bed sand, sand (lead 02k+10p=12 km), gravel (22 k.m. lead), tyre coupling (unique 3409-gn tyre coupling for 100hp & 50hp), bosch lithium based grease, graphit gland pack rope 12mm, graphit gland pack rope 16mm, 2.2kw (3hp) foot mounted motor tefc 1500 rpm 3-phase motor for clariflocculator, multi-blade paddles mounted on central shaft driven by foot-mounted geared motor, onload changeover switch 800a,415v, 4 pole, digital voltmeter (0-500v)-3 phase indicator, digital ammeter (0-500a)-3 phase indicator, led indicator lamp or phase light (r/y/b/g), pvc/xlpe insulated pvc sheated heavy duty,armoured lt cable with aluminium conductor voltage upto and including 1100 v, 240sqmm, 3.5 core, 2.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, 1.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, laying of one number pvc insulated and sheated/xlpe power cable of 1.1kv grade of size not exceeding 35sqmm direct in ground including excavation, sand cushioning and refilling the trench, tapered bearing 7316 mcb (large), deep groove ball bearing 6311 mcb (small), chain pulley block hoist 5 tonne, 360 rotation, 3mtr lifting height, pipe wrench, 18 inch taparia adjustable heavy duty pipe wrench, pipe wrench, 14 inch taparia adjustable heavy duty pipe wrench, 1/2" sqaure drive flank drive taparia goti 22mm socket set, 1/2" sqaure drive flank drive taparia goti 20mm socket set, rachet wrench, 18 inch single sided rachet wrench, 1/2 inch drill bit for threading di/ci pipe, tata agrico hammer -dfs- 2.5kg, 6 inch tyton epdm/sbr rubber gasket for 150mm di pipe conforming to is:5382 isi mark, 4 inch tyton epdm/sbr rubber gasket for 100mm di pipe conforming to is:5382 isi mark, 6 inch di end cap flanged type for 150mm di pipe, 4 inch di end cap flanged type for 100mm di pipe, epdm rubber gasket for non-return valve, earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 150mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm repair), earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches wit

State Government

CTN :45669560

20 Jul, 2026 8.90 Lacs

Sarni - Madhya Pradesh

Tender For procurement of various gaskets and sleeve couplings installed at ahp-iv,stps, sarni.

corporations/Associations/Others

CTN :45676412

02 Jul, 2026 7.71 Crore

Kolkata - West Bengal

Tender For centralized rate contract for two years for supply of various types of spare parts of ms elecon engg. company limited for chp of different plants of dvc. - dowel, part no.-30, type: k2 gear unit, make: elecon engg. co. ltd., drain plug, part no.-45, type: k2 gear unit, make: elecon engg. co. ltd., breather plug, part no.-56, type: k2 gear unit, make: elecon engg. co. ltd., input pinion shaft, part no.-102, type: k2 gear unit, make: elecon engg. co. ltd., input extension key, part no.-107, type: k2 gear unit, make: elecon engg. co. ltd., locknut, part no.-110, type: k2 gear unit, make: elecon engg. co. ltd., lock washer, part no.-111, type: k2 gear unit, make: elecon engg. co. ltd., flanged bush, part no.-120, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-132, type: k2 gear unit, make: elecon engg. co. ltd., output shaft, part no.-202, type: k2 gear unit, make: elecon engg. co. ltd., output gear, part no.-203, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-206, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-232, type: k2 gear unit, make: elecon engg. co. ltd., intermediate pinion shaft, part no.-302, type: k2 gear unit, make: elecon engg. co. ltd., intermediate gear, part no.-303, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-306, type: k2 gear unit, make: elecon engg. co. ltd., roller assembly r-800 drg no- r00673/3, for paddle feeder m/c no. 27-30, make-elecon, roller assembly r-600 drg no- r00686/3 , for paddle feeder m/c no.-27-30,make-elecon, geared coupling ed500, propeller shaft series 1600mm part-m08244/1 for paddle feeder m/c no- 27-30, make-elecon, paddle shaft 88diax477 lg part-m13004/4 for paddle feeder m/c. no.-27-30, make-elecon, paddle shaft 88diax812lg part-m13006/4 for faddle feeder m/c no.-20-30, make elecon, coupling for propeller shaft part-m13005/4 for paddle feeder m/c no.- 27-30, make elecon, wheel drive parto-m11031/3 for paddle feeder m/c no. pf-27-30 , make - elecon, keeper plate part-m08596/4 for paddle feeder m/c no.- 27-30, make - elecon, spacer for bearing 89.8/80diax27thk for paddle feeder m/c no- 27-30, make -elecon, cover for bearing 130diax14 thk for paddle feeder m/c no. 27-30, make-elecon, plain wheel dia 160/90x85thk for paddle feeder m/c no.- 27-30, make - elecon, spindle 40 diax210lg part-m08594/4 for paddle feeder m/c no.- 27-30, make - elecon, deep groove ball bearing single row , part no.- m08593/3 for paddle feeder m/c no.- 27-30, make -elecon, filter return line for hydraulic system of paddle feeder pressure relief valve for hydraulic system of paddle feeder, spring, drg. no. m02728/4spare for vibrating feeder,spring, drg. no. m02728/4spare for vibrating feeder, paddle hub with arm, part no. m08456/2 (spares for paddle feeder plough drive assembly of elecon make paddle feeder, m/c no. pf: 27-30), locking plate(spare for paddle drive assy.), locking assy. d0b1kon1012140x190 for paddle drive assy., ci cast housing for extra bearing housing (spare for paddle drive assy. of paddle feeder), spacer 75 od x 55 id x 48 lg (for paddle drive assy.), spacer part no. m13062/4(for travel drive assy.), torque arm for travel drive, spacer part no. m13007/4(for travel drive assy.), boss p no. dc0269414, deep groove type ball bearing (for spacer for d.s. trolley), nylon ring 3thk 125od x80 id for spare of ds trolly assy., pin 80 dia x 235 lg(spare for ds trolly assy.), cover 20/80 dia x 20 thick(spare for ds trolly assy), wheel dia 315 mm(spare for ds trolly assy.), drive gear box (type-c082111)make;pbl without electric motor for ilms, planetary gearbox input sun pinion for elecon make planetary gear box type and size pav 45 ratio-5:1, planetary gearbox set of oil seal for elecon make planetary gear box type and size pav 45 ratio-5:1, annulus (part no.5), of planetary gearbox type:pav-45, ref drg no.7741891/3, planet bolt (part no.8) of planetary gearbox type:pav-45, ref drg no.7741891/3, planet carrier cum output shaft(part n

State Government

CTN :45670472

28 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For procurement of journal assembly spares and rubber gaskets for xrp 1043 coal mill in 2x500 mw, btps bhusawal - journal assy oil seal (solid), pn 120, o-ring oil seal for upper journal bearin, journal assy o-ring oil seal, pn 110, gasket for victolic pipe coupling 28", rubber gaskets for coal pipe coupling, rubber gasket for sleeve coupling 26",spring stud bearing assy, pn 50, cm xrp 1043 mill body cover wear sleeve.

Central Government/Public Sector

CTN :45652264

27 Jun, 2026 NA

Rourkela - Odisha

Tender For geared coupling for skip winch gear box(1items) comprising of following: - coupling,gear,107mm,dwn:pd/r-152660 ,

CTN :45491759

01 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of ls and hs geared coupling for coal handling plant

CTN :45648287

02 Jul, 2026 NA

Auraiya - Uttar Pradesh

Tender For procurement of spares of sulzer make vhp bfw pumps installed in gcu 2 plant at pata - balance drum bushing, p/n 605.01 , o-ring, p/n 412.07 , profile seal (brl to del covr), p/n 410.05 , profile seal(stbxndetodlcvr), p/n 410.10 , profile seal (suc csg to brl), p/n 410.20 , o-ring, p/n 412.36 , thrust bearing, p/n 314.01 , thrust collar, p/n 384.01 , forced oil lube brg, p/n 313.01 , ring, p/n 500.16 , spacer ring, p/n: 504.05 , gasket, p/n400.12 , gasket, p/n400.07 , gasket, p/n 400.03 , gasket, p/n 400.02 , gasket, p/n400.04 , bearing isolator, p/n423.10 , bearing isolator, p/n423.11 , sleeve coupling , o-ring, p/n 412.08 , o-ring, p/n 412.56 , split ring, p/n 501.01 , key, p/n 940.03 , balance drum, p/n 603.01

Central Government/Public Sector

CTN :45579077

26 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For tender for supply of elecon make geared coupling ed series -geared coupling elign assy ed3200 elecon , coupling geared mm ed 2200 elecon , coupling geared ed1600 elecon , coupling geared mm ed 280 elecon , coupling geared mm ed 4500 elecon , geared coupling elecon ed 130 , geared coupling elecon ed 1000

Sleeve Coupling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector