Get complete information related to latest Sleeve Coupling Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sleeve Coupling Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sleeve Coupling Tenders.
Tender For auction sale of rolling stock - condemned bg 8 wheeler- ac coach with all available ferrous-non ferrous-wooden fittings thereon excluding rc items . mechanical rc items: 1) complete bogie and bolster assembly with all available fittings including brake gear items, 2) wheel set complete with axle,axle box and roller bearing assembly with pulley, 3) buffer plunger with buffer pads and buffer casings, 4)brass wearing piece and plate, 5)bio toilet complete set, 6)aluminium water tanks-if any, 7)distributor valve, 8) brake cylinders. electrical items: 1) alternator, 2) bldc fan, 3) vrla batteries .coach numbers- 1) special repair wgaccn 01914 = 1 coach,pl.no. 98111061 ds8 no: 232833 dt 21.06.2023 , location: tnpm marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government, 2)rate per number should be quoted,3)coach is in grounded condition . 4) screw coupling to be defaced before final delivery. 5)coach is in grounded condition (bogies and wheel sets are in removed condition).6) ac components, batteries, bio toilets are in removed condition. 7) remaining coach in ds8 already sold. 8) purchaser should take safety precaution while cutting/delivery of coache. 9) cutting permitted to loadable sizes only. 10) crane loading may be permitted.
Tender For auction sale of rolling stock - pl no.98111061, condemned and over aged bg-8 wheeler icf coach 2 nos. with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc items. 1}coach no. special repair cn 046245 (year built 2004), ds-8 no. 334714 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046245 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] center pivot 2 nos. 5] bogie mounted brake cylinder 4 nos, 6] distributer valve complete full set 1 set, 7] wearing piece( bronze) and plate 4 nos each, 8] auxiliary reservoir 200 l. 1 no 9] main doors -4 nos 10] water tank-4 nos 11] cut off angle cock -4 nos 12] dirt collector- 2 nos 13] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.09.09.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]eml- 4 nos 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery with tray-19 nos. 8] battery tray- 4 nos.9] rotary switch with panel board- 1 no 10] alternator to regulator wire ( copper ) -1 kg 11] one alternator(4.5 kw) & one set of axle pulley ( with bogie), 2} coach no. special repair cn 046213, (year built 2004) ds-8 no. 334715 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046213 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinders- 4 nos 5] distributer valve complete full set 1 set, 6] wearing piece( bronze) and plate 4 nos each, 7] auxiliary reservoir 200 l. 1 no 8] main doors -4 nos 9] water tank-4 nos 10] cut off angle cock -4 nos 11] dirt collector- 2 nos 12] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.25.07.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]5w westibal 2 nos 5]eml- 4 nos 6]mobile charger socket-18 nos. 7] regulator 4.5 kw- 1 no 8]vrla battery with tray-19 nos. 9] battery tray- 4 nos.10] rotary switch with panel board- 1 no 11] alternator to regulator wire ( copper ) -1 kg, custodian sse/ c&w/ shoranur.
Tender For corrigendum : complete overhauling of electrical wire rope hoist along with supply of spares for electrical wire rope hoist installed at coal mill area at 2x600 mw, stage-i, sstpp, mppgcl, dongalia. - scope of service, complete supervision & installation of new spares/replacement of damaged/eroded spares of all 08 numbers of hoist (04 numbers capacity-20 ton & 4 numbers of capacity-15ton)., scope of supply, spares for 20 ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4 duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct<, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 20, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 20 mm / 6x36 steel core/ galvanized, make- ushamartin, push buttons with 12 meter cable, rectifier size- eh720hhd, long travel dsl system, i- chain (5 mm)-, ii- cable 6 mm epr, iii- fasteners (1/4x2 ), lt motor shaft, lt motor pinion, spares list of 15-ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4,duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 18, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 15 mm / 6x36 steel core/ galvanized, make- ushamartin, pendent push buttons, rectifier size- eh720hhd, long travel dsl system, chain (5 mm)-, cable 6 mm epr, fasteners (1/4x2 ), lt motor shaft, lt motor pinion
Tender For procurement of miscellaneous items for unit 4 overhauling, sgtpp - sgtpp, air filter, complete set, 250 srs filter for paph/saph [500 mw boiler] air motor veljan , port size 1inch bspt (body ported), max pressure10 bar having 40 micron sintered bronze filter element with manual drain, alumin wl & nitrile seals ( (oil side set) ), bowl of air filter for air motor of paph/saph [500 mw boiler] veljan with manual drain suitable for 250 srs filter,moc: poly carbonate. ( (oil side) ), silencer (pn:400450035) for air motor of paph 400450035 iec dusterloh ( for paph & saph air motors ), hose barb/nipple size 3/4" mnpt x 1/2" ( hose nipple 1/2 "x 1/2 "-120 nos and hose nipple 3/4 "x 1/2 "-80 nos. outer thread at one end and one end will be fitted with 1/2" rubber hose moc: ms application area: air boosting line at mrhs [quoted as per additional text description] ), needle valve,ss316 ( size: inch 3000 psi ,moc ss 316, ferrule end connection make:baldota. [quoted as per additional text description] ), flexible hose, id-12.7 mm, l-613 mm, for oil gun 500mw boiler , moc: ss 304, ms split pin # ( ms split pin, size: 4x80 [quoted as per additional text description] ), split pin # ( ms split pin, size: 3x80 [quoted as per additional text description] ), rubber hose size 1/2" ( 1/2 inch flexible rubber hose. moc: high quality braided rubber application area: at dome cooling water line of mrhs. [quoted as per additional text description] ), jubilee clamp; size: 1 ( jubilee clamp: 1/2 inch application area: at hose of air boosting line at mrhs. moc: gi [quoted as per additional text description] ), expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. ( expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. with extra flange attached with inner sleeve,pressure rating - 3.5 kg medium - coal reject. minimum temp to be withstood-300 deg c. ), hose, seal air, mill xrp 1003 ss flexible hose, od - 64 mm. length - 900 mm.both side hex nut socket fittings, filter,suction,600x600x50mm,ss net 3layers,5 micron ( application: for ac & dc scanner air fans ), loctite super glue in tubes 013 gms/2gm tube ( loctite sl 5910 each contains: (300 ml) [quoted as per additional text description] ), loctite 270 (thread lock) # ( loctite 241 each contains: (50 ml/51.3 g) [quoted as per additional text description] ), stainless steel net, width:470mm for 500 mw boiler trough seal , wire thickness: 5 mm, square gap:11 mmx11mm, moc: ss 416., lubricating paste altemp q nb 50 for pa & fd fan make- kluiber ( total 5 nos of tubes. each tube contains 80 gm ), strainer for blowdown transfer pump part no-15 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc:ms ( application: boiler blowdown pump moc: ms ), shaft set,moc- ss410,vo wpe 100/320 for blowdown transfer pp vo wpe 80/400 & 100/320 pt no-7 wpil for pp sl no. bvk-50150-151/bvk-50152-153/bvk-50154-155 ( 4 sets: slightly larger, 2 sets: slightly smaller dimension as per drawing ), screw,self drill,washer,5.5x25mm ( hex flange head-pvc washer blue zinc coated-coarse thread size: 5.5x14x25 mm make: welfast ), couplingsleeve for blowdown transfer pump wpil part no-21 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155,wpil,moc: ss 410 ( shaft sleeve /couplingsleeve-a. as per drawing of boiler blow down pumps spares ), shaft sleeve for blowdown transfer pump wpil part no-19 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc: ss 410 ( shaft sleeve-b. as per drawing of boiler blow down pumps spares. ), rubber bearing ( rubber bush/cut less bearing, moc:inner: teflon, outer: brass (copper-85%, tin-85%, lead-85%, zinc-85%). as per drawing of boiler blow down pump#s spares (larger-10+smaller-5) ), bush bearing/ b. housing for blowdown transfer pump wpil part no-20 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154
Tender For procurement of bottom ash hopper and feed gate related spares in unit-3 coh at ahp 210mw, cstps, chandrapur. - ahp basys fdgate guide angle, bhel seal trough flushing nozzle small, ahp basys hop hopper flushing nozzle, ahp basys cg chamber glass, hose,flex ss corrugat,1/2" bsp(f) l 0.5m, ss corrugated 1/2" bsp (f) l 0.7 m, ball valve cs comp asly size-25 mm, body cs complete ball valve 15 mm, ball body cs comp vlv 1 / 2", ball valve cs comp asly size-50 mm, lubricant, coolant audco sealant 731-a, lubricant, coolant audco sealant 731-b, lubrcnt grease audco sealant 731-d, nut bolt for 200 nb sleeve, sleevecoupling 200 nb ms coupling set, shaft sleeves set complete
Tender For auction sale of rolling stock - pl no. 98111061, condemned and over aged bg-8 wheeler icf coach no. special repair wgscn 054562 (year built 2005) without bogie in grounded condition with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc and already removed rc items. mechanical rc items 1] buffer plunger and casing 4 nos 2] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 3] distributer valve complete full set 1 set, 4] main doors -4 nos 5] overhead water tank-4 nos 6] adapter for cut off angle cock- 4 nos. 7 ) cut off angle cock -4 nos. electrical rc items 1] alternator to regulator wire (copper)-1 kg. already removed rc items a) mechanical items 1] complete bogie arrangements including wheel sets 2 nos, 2] wearing piece( bronze) and plate 4 nos each.3] bogie mounted brake cylinder 4 nos. b) electrical items 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w night lamp -10 nos, 4] 9 w mirror lamp-2 nos, 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery -13 nos. 8] battery tray- 4 nos. 9] rotary switch with panel board- 1 no. ds-8 no. 334551 dt 18.04.2026, custodian sse/c&w/pgt, location near pgt/memu shed.