Latest sole plate Tenders | Government sole plate Tenders

Central Government / Public Sector

CTN :40080583

12 May, 2025 NA

Gooty - Andhra Pradesh

Tender For supply of tyre defect gauge for bg wheel made from 3.2 mm/4 mm as per rdso specification plate no.52, rule 3.3.5 & s 4.19.1 irca for wagon. thin flange 16mm flatness 60mm complete in rexine bag. (it must carry valid calibration certificate from nabl accredited lab or any government authorised lab).

State Government

CTN :40044754

23 Apr, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

corporations/Associations/Others

CTN :40078927

19 May, 2025 6.56 Lacs

Puruliya - West Bengal

Tender For custom bid for services - reconditioning of coal feeder outlet reducer portion (chute) for both units of rtps-1. transportation of damaged/worn-out feeder outlet reducer portion (chute) from rtps, dvc site to vendor workshop and repaired chute from vendor workshop to rtps, dvc site is in the scope of vendor. 2. loading/unloading of materials are in the scope of vendor except at rtps, dvc site. 3. a joint inspection will be done at rtps site for noting & area marking on chute (area to be repaired) before receiving of material. 4. measure the worn-out portion & cut it completely with the help of cutting tools or plasma cutter. 5. grinding and edge preparation is to be done as per requirement on plate before welding. 6. fit the new plate as per requirement and weld it in chute with proper welding electrode308l and grind finish is required after welding. 7. new plate & its bending in required shape is in the scope of vendor. 8. all consumable like welding electrode, cutting wheel, grinding wheel, etc. are in the scope of vendor. 9. plate material (plate thickness-12 mm, material- ss304, make will be only of three company sail, tata & jindal) is in the scope of vendor. 10. repairing/replacement of ms flange if required will be in vendor scope. 11. payment will be made on actual square meter repaired by vendor. 12. quantity of chute for repair is 12 nos it may vary (may be increase or decrease). 13. delivery period is 180 days after placement of wo. 14. part payment against part supply is acceptable. 15. the reconditioned chute has to be guaranteed for a period of 12 months from the date of supply & 06 months from date of commissioning whichever is earlier against bad workmanship. guarantee/warrantee certificate to be furnished at the time of completion of work. 16. party has to submit the 1:1 fitment cum interchangeability certificate of material. 17. the party has to submit the indemnity bond after placement of work order. 18. pre-dispatch inspection shall be carried out by m/s dvc at vendor s works and the vendor has to intimate 15 days in advance regarding readiness of the material. 19. dimensional verification & positive metal identification (pmi) test shall be carried out during pdi for ss 304 plates welded to chute and the vendor has to arrange machine with valid calibration certificate at their own cost. 20. all the old & damaged scrap cut during the course of work shall be returned to m/s dvc during delivery of chute at rtps.

CTN :40062013

03 May, 2025 2.53 Crore

Karanjia - Odisha

Tender For procurement and installation of different instruments for instrumentation of earth dam and spillway in deo irrigation project for the year 2025. - supply of fiberglass reinforced plastic (frp) make universal enterprises an improved venturi plate conformed to is: 9108 for accurate measurement of water flowing through channels comprising of masonry construction provided with pre-fabricated glass fiber lining on both sides, a side chamber provided in one side masonry wall of the said flume on the upstream side, a pipe provided at the bottom of the chamber connecting the said chamber with the water flowing through the notch, a float means provided in the said chamber, enabling recording the rising or falling level of water in the said chamber such as a scale provided in the said chamber, moulded engraved gauge marking in lit/sec and also in centimeter including moulded and engraved discharge table, capacity marking, flow direction, m.s pipe stiffeners, hold fasts, sand treatment on the backside of plate but excluding gst as per the instruction of engineer-in-charge etc. complete, inside spillway foundation gallery - 15 lit./sec. v-notch, seepage drain - 90 lit./sec. v-notch, calibration marks:- supply of polymers composites improved calibration marks make universal enterprises with contact molding process, both side finish, m.s. strip embedded inside, engraved and molded marking for bands and figures covered with radium and covered with two coats of polyurethane for surface protection with marking in reduced levels, sill, fsl, frl, mwl but excluding gst as per the instruction of engineer-in-charge etc. complete, supply vw up-lift pressure meter provision for connected to das make : aimil ltd. uplift pressure meters are used for measuring and recording of uplift pressures acting in foundations of concrete/masonry dams. vibrating wire type uplift pressure meter : range: 0.2 mpa to 5.0 mpa./7ksc accuracy: 0.5 -1 % fs. temp limit: - 10 to 70 deg c. coil resistance: 140 - 160 ohm thermistor: ysi-44005 or equivalent. material: stainless steel cable: 1m, 4-core borehole for uplift pressure meter at foundation gallery (inside spillway) should be straight from foundation level and clear. proposed location : inside spillway foundation gallery in overflow section: 7 no. non overflow section: 2 no. purpose: uplift water pressure measurement. (but excluding gst), supply automatic seepage measuring system make : aimil ltd / sysgeo italy or equivalent vibrating wire water leakage measuring systems are used for measuring water leakage and flow in dam galleries by installing v notch weir coupled with vibrating wire sensor for remote monitoring of water leakage. sensor type: sensor : vibrating wire precision water level sensor range: 300mm resolution: 0.025%fs material : stainless steel excitation : sweep or pluck assembly: v.w. type sensors enclosed in an environmental proof fibre glass box. splicing kit & adhesive required accessories. proposed location : inside spillway foundation gallery: 1 no. toe drain: 1 no. (drainage outlet) purpose: seepage water measurement in liter per second (but excluding gst), supply data logger or data acquisition system aimil make dt85g with cem20 or ace s korea analog channels 16 analog input channels each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. expansion requires optional cem20 sampling integrates over 50/60hz line period for accuracy and noise rejection maximum sample speed: 40hz effective resolution: 18 bits linearity: 0.01% common mode rejection: >90db line series mode rejection: >35db vibrating wire frequency range: 500 to 5khz coil resistance: 50 to 200 stimulation method: single pulse pluc digital channels 8 bi-directional channels input type: 8 logic level (max 20/30v) output type: 4 with open drain fet(max: 30v, 100ma) 4 with logic output alarms power supply , sim card will be in your scope. propo

Central Government/Public Sector

CTN :39772761

23 Apr, 2025 NA

Varanasi - Uttar Pradesh

Tender For bid to ras supply of mounting plate-ii , sole plate for hp-1103 mill , sole plate (bm-011.03. c) , mounting plate-i

Central Government / Public Sector

CTN :40040842

05 May, 2025 NA

Sambalpur - Odisha

Tender For supply of 6 mm thick nylon cord reinforced grooved rubber sole plate for placing beneath crossing port ion in 1 in 12 turnout rdso drg no.t-7014 to t-7021. [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40058590

05 May, 2025 NA

Mumbai - Maharashtra

Tender For weighing machine digital weighing scale capacity 500 kgs, accuracy 50 gram, checker plate top size 600 mm x 600 mm approx., red bright led display, 6v, 4ah, rechargeable smf battery operated a nd single phase 90 volt to 250 volt, 50 hz electric operated, structure made from 50mm square heavy pipe, supply with calibration certificate from government approved agency. make tula, tanita, stenling, adorin, ritco, phoenix or similar. ]

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

State Government

CTN :39905526

30 Apr, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : supply, delivery of laboratory chemicals and accessories for 14 fourteen nos. laboratory under burdwan division, p.h.e. dte. - chromogenic coliform agar, for simulteneous determination & count of escherichia coli and total coliforrns in water samples as per iso 9308-1:2014, 100gm pack mercklhimedia, consurnables for bacteriological analysis by mf technique, membrane filter- cellulose nitrate, sterile- individually packed, white membrane, gridded, 47mrn dia, 0.45 micron porosity, pack of 100 circles merck/himedia, petridisc autoclavable borosilicate glass 60x 15 mm, consumables for bacteriological analysis by mf technique. radiation sterilie plate 15x60mm, 250 nos a pack, dpd - 1 (25 strip/box) rapid lovibond, residual chlorine kit complete with comparator box with continuous colour scale disc for residual chlorine & total chloriiie analysis, range/graduation: 0/0.2/0.4/0.6/0.8/i.0 11.211.4/ 1.611.8/2.0 12.5/3.0/3.5/4.0, to be supplied with unbreakable cells, frosted on two sides 13.5 mm path length. volume l0 ml. with lid, easil} dispersibje dpd tablet for residual chlorine- 530 mos.& dpd tablet for total chlorine-30 mos,tablet crusher, carrying box, operating manual.make: lovibondlmerck, colour 500 pt co unit 100 ml. from 17034 rmp, edta disodium salt (titriplex-lii), 100 gm, ammonia buffer solution for total hardness analysis (500ml/pack) make:merck/fisher/sigma, eriochrome black t indicator for total hardness analysis (25gm/pack)make:merck ifisherlsigma, triethanolamine min. 99.50% for total hardness analysis (500mlfpack) 500 ml pack make: merckifisherls igmalfinar, calcium carbonate volumetric standard. secondary reference matenal for complexometry, traceable to nist standard reference material (srm) from 17034 rmp, amonia solution 25% (500 ml.), sodium hydroxide pallet 500 gm, murexide (5,5 -nitrilobarbi turic acid monoammonium salt) for analysis , 5 gm, turbidity standard solution for tn100lr make:eutech, turbidity standard solution for tq i1ooir, make: merck, calibration standard lovibond tb 210 ir, buffer ph 4.01@25 deg c calibration solution calibrated against nist traceable sbs (480ml pack) suitable for inolab & ph510/700 ph meter. from 17034 rmp make: eutech/wtw/equiv, buffer ph 7.00 @25 deg c calibration solution calibrated against nist traceable sbs (480ml pack) make: eutech/wtw/equiv, |buffer ph 10.01 @25 deg c calibration solution calibrated against nist traceable sbs (480mi pack) from 17034 rmp make: eutech/wtw/equiv, potassium chloride analitical reagent quality assay: min 99.5% ph oh 5% solution, 9.0-9.8, 500gm make: merck/fisherlsigma/finar, silver nitrate analytical grade 25 gm, sodium chloride volumetric standard, crm for argentometry, traceable to nist(80 gm), potassium chromate analytical grade assat min 99.5%, ph of 5% soln : 9,02-9.8,500 gm, reagent suitable for spectrophotometric analysis of iron in potable water, range 0.02- 3.00 mg/i soluble iron (1000 tests/pack) make: merck/ lovibond/ palin/wtw, lronstandard solution 1000.mg/l traceable to srmfrom nisttraceable (125 ml/pack) make: inorg venture/ reagecon/ merck/sigma/equiv, sulphuric acid,er ,500ml, sodium carbonate volumetric standard, secondary reference material for acidimetry, traceable to nist srm from 17034 rmp, methayl orange(125 ml), bromocresol green indicator (5 gm.), methayl red indicator ( 25 gm.), phenalopthalin indicator 125 ml., hydroxylammonium chloride 100 gm., reagent suitable for spectrophotometric analysis of manganese in potable water range: 0.1-10 mg/l of manganese, (250tests/pack) make: merck/ lovibond/ palin/ wtw., manganese standard solution traceable to srm from nist traceable (125 ml/pack) from 17034 rmp make: inorg vent /reagecon/merck/sigma, hydrochloric acid min: 36.5%, analytical quality & acs grade, arsenic content: 0.01 ppm max. (500ml/ pack ) make: merck/ fisher/ sigrna/finar, potassium iodide analytical quality (100gm/pack) assay: min. 99.8%,, tin (11)chloride dihydrate analytica

Central Government/Public Sector

CTN :39990210

28 May, 2025 NA

Multi City - Multi State

Tender For running contract for one year for supply of 6.2 mm thick composite grooved rubber sole plate to rdso drg no.rt-6618

Sole Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors