Latest solution pump Tenders | Government solution pump Tenders

Central Government / Public Sector

CTN :40120400

06 Jun, 2025 NA

Vadodara - Gujarat

Tender For corrigendum : cmi spares - list of item(s) / work(s) as per tender documents, lip seal for dial indicator, top seal f/upper bearing housing, upper bearing,p/n:2227, bottom seal f/uppr brg husg, sets o ring f/lower shaft, o ring for main head flnge, knuckle pin item no-7, pawl pin item no-8, pawl bushing item no-10, pawl item no-11, spacer-cylinder pin item no-12, cylinder clevis pin item no-14, washers,cylinder pin,set, p/n-3530b, lube hoses no.5,7,8, p/n-9910a-18.75,uop, lip seal set, main bearing,p/n-2536-2537, secondary seal sleeve,p/n:0189c, o ring f/husg top head joint, sets o ring f/secondary seal, hydraulic pump dischrge filtr element, flange gasket, sight glass assy,p/n-2410, o ring for sight glass, p/n-2740, packs of lubricate grease, pawal springs,p/n-61,rv-iii,uop

State Government

CTN :40458666

31 May, 2025 1.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : providing, installation, testing and commissioning of 3000 gph x 100 mtr. head submersible pump set as stand by and other allied works at tube well cum pumping station jallochak under mh-2215 ms.

State Government

CTN :40520533

13 Jun, 2025 6.19 Lacs

Ukai - Gujarat

Tender For supply of hot deep galvanized nuts & bolts of various size and other miscellaneous materials at switchyard, tps, ukai.(et-5965 switchyard) - cadimium coated hexagonal head bolt and nut with check nut, size m-4, 40mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-4, 65mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-4, 80mm length with 2 plain washer, cadimium coated hex.head bolt,nut & 2plain washer size; m4 x 100 mm full thrad, cadimium coated hexagonal head bolt and nut with check nut, size m-6, 40mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-6, 65mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-6, 80mm length with 2 plain washer, cadimium coated hex.head bolt,nut & 2plain washer size; m6 x 100 mm full thrad, hot deep galvanised hexagonal head bolt and nut with check nut, size m-8, 40mm length with 2 plain washer, hot deep galvanised (gi) hex.head bolt,nut & 2 plain washer size; 8 x 65 mm full thrad, hot deep galvanised hexagonal head bolt and nut with check nut, size m-8, 80mm length with 2 plain washer, hot deep galvanised (gi) hex.head bolt,nut & 2plain washer size; 8 x 100 mm full thrad, hot deep galvanised hexagonal head bolt and nut with check nut, size m-10, 40mm length with 2 plain washer, hot dipped g.i. full thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m10x65 mm long, hot dipped g.i. full thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m10x50 mm long, hot deep galvanised hexagonal head bolt and nut with check nut, size m-10, 80mm length with 2 plain washer, m10 x 70 mm hot deep full thread galvanised nut-bolt-washer., hot dipped g.i. half thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m10x90 mm long, hot deep galvanised (gi) hex.head bolt,nut & 2plain washer size; 10 x 100 mm full thrad, hot deep galvanised (gi) hexagonal head bolt,nut & 2 plain washer size; 12 x 50 mm full thrad, hot deep galvanised hexagonal head bolt & nut with check nut, size-12 mm dia x 65 mm length with 02 plain washer, hot dipped g.i. half thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m12x80 mm long, hot dipped g.i. half thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m12x100 mm long, hot deep galvanised hexagonal head bolt & nut with check nut, size-12 mm dia x 125 mm length with 02 plain washer, hot deep galvanised hexagonal head bolt and nut , size m-16, 60mm length with 2 plain and 1 spring washer, hot deep galvanised hexagonal head bolt and nut , size m-16, 90mm length with 2 plain and 1 spring washer, hot deep galvanised hexagonal head bolt and nut , size m-16, 125mm length with2 plain and 1 spring washer, hot deep galvanized plain washer , size-08mm, hot deep galvanized plain washer , size-10mm, hot deep galvanized plain washer, size-12mm, hot deep galvanized plain washer , size-14mm, hot deep galvanized plain washer , size-16mm, bimetalic plate suitable for palm connector size 100x100x1 mm of alluminun and copper, bimetallic plate suitable for palm connector size 150 x 100x1 mm of aluminum & copper (without hole), s.s. bottle for oil sample of dga test for tmer, s.s. bottle for oil sample for dga test of tmer oil for 1 ltr, s.s. bottle for oil sample for dga test of tmer for 1.5 ltr, rotary gear pump-motor set, capacity: 50 lpm., pvc flexible hose pipe 25 mm

Central Government/Public Sector

CTN :40522480

19 Jun, 2025 NA

East Singhbhum - Jharkhand

Tender For supply of spares - oil valve kit part no-24063058 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , thermostat kit part no-24063114 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , piston ring kit part no-22222394 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , main bearing kit std pos-2,4,6 part no-23573146 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , main bearing kit std pos-1,3,5,7 part no-23573147 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , thrust washer kit std-a part no-21908099 for repairing of engine, modeltad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , thrust washer kit std-b part no-21908101 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , seal crank shaft rear part no-21877169 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , seal crank shaft front part no22731065 for repairing of engine, model-tad851ve, makevolvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , gasket cylinder head part no-22722746 for repairing of engine, modeltad851ve, make-volvo penta suitable to similar esn 3008602532 and 3008602529 fitted along with lhd 907 , valve cover gasket part no-21717748 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , gasket rocker cover part no-21717753 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , oil filter cap part no-23593794 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , oil pump part no-22015568 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , gasket part no-21838299 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , sump gasket part no-21492627 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , gasket part no-24075099 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , gasket inlet manifold part no-21859203 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , turbocharger part no-23099979 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn-3008602532 and 3008602529 fitted along with lhd 907 , gasket part no-21615788 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , gasket part no-22206133 for repairing of engine, modeltad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , gasket part no-20707685 for repairing of engine, modeltad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , thermostat part no-21746213 for repairing of engine, model-tad851ve, make-volvo penta suitable to similar esn3008602532 and 3008602529 fitted along with lhd 907 , gasket part no-21796165 for repairing of engine, modeltad851ve, make-volvo penta suitable to simil

State Government

CTN :40413235

02 Jun, 2025 NA

Murshidabad - West Bengal

Tender For corrigendum : installation of 10 nos over head reservoir with submercible pump within dogachi napara g.p. under 15th fc (id- 118352782) (rs 149018.00 each)

State Government

CTN :40413240

02 Jun, 2025 NA

Murshidabad - West Bengal

Tender For corrigendum : installation of 10 nos over head reservoir with submercible pump within gazinagar malancha g.p. under 15th fc (id- 117338382) (rs 149018.00 each)

State Government

CTN :40413243

02 Jun, 2025 NA

Murshidabad - West Bengal

Tender For corrigendum : installation of 12 nos over head reservoir with submercible pump within chachanda g.p. under 15th fc (id- 118353240) (rs 149018.00 each)

State Government

CTN :40413245

02 Jun, 2025 NA

Murshidabad - West Bengal

Tender For corrigendum : installation of 10 nos over head reservoir with submercible pump within protapganj g.p. under 15th fc (id- 118339214) (rs 149018.00 each)

Central Government/Public Sector

CTN :40521905

09 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of spares for mcf feed pump and ro high pressure pump - neck ring for mcf feed pump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no. 1181 2) material: cprm(astm a743 gr.cf8m 3) plump model: miso 125-400. 4) capacity 280 m3/hr. 5) head: 45 mtr. 6) power: +5 kw. 7) speed: 1480 rpm. 8) pump oa no. 81280327/271/29) pump make: m/s wilo mather and platt pumps pvt ltd , support foot for mcf feed pump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no.: 1192 2) material: m.s 3) plump model miso 125 400. 4) capacity: 280 m3/hr. 5) head: 45 mtr, 6) power: 45 kw. 7) speed: 1480 rpm, 8) pump oa no. 81280327/271/29) plump make: m/s wilo mather and platt pumps pvt ltd , shaft for mcf feed pump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no.: 1800 2) material ens(bs 970 gr 080,m403) pump model: miso 125-400. 4) capacity: 280 m3/hr. 5) head: 45 mtr. 6) power: 45 kw. 7) speed: 1480 rpm. 8) plump oa no. 81280327/271/29) pump make: m/s wilo mather and platt pumps pvt ltd note: (a)following accessories are to be supplied along with the shaft (1) impeller nut p/no 1700, (2) shaft sleeve p/no. 2100, (3)0 ring p/no. 4250, (4)spacer sleeve p/no. 2111, (5)internal circlip p/no. 2902, (6)impeller key p/no. 3200, (7)coupling key p/n. 3250 , bearing cover nde for mcf feed pump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no. 2752 2) material: c1 (is:210 gr fg260 3) pump model: miso 125-400. 4) capacity: 280 m3/hr. 5) head: +5 mtr. 6) power: 45 kw. 7) speed: 1480 rpm. 8) pump oa no.: 81280327/271/29) pump make: m/s wilo mather and platt pumps pvt ltd , bearing cover de for mce feed plump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no.. 2753 2) material: c.1 (15:210 gr fg260 3) pump model: miso 125-4004) capacity: 280 m3/hr. 5) head: 45 mtr. 6) power: 45 kw 7) speed 1480 rpm. 8) pump oa no. 81280327/271/29) pump make: m/s wilo mather and platt pumps pvt ltd , deflector for mcf feed pump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no.: 2070 2) material m.s. zinc plating 3) plump model: miso 125-400, +) capacity: 280 m3/hr. 5) head: 45 mtr. 63 power: +5 kw. 7) speed: 1480 rpm. 8) pump oa no, 81280327/271/29) pump make: m/s wilo mather and platt pumps pvt ltd , o ring set for mcf feed plump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no. 4250, +250-1, 4250-22) material, nitrile rubber 3) pump model miso 125-4004) capacity: 280 m3/hr. 5) head: 45 mtr. 6) power: 45 kw. 7) speed 1480 rpm. 8) pump oa no. 81280327/271/29) pump make: m/s wilo mather and platt pumps pvt ltd , mechanical seal for mcf feed pump in sewage treatment plant no.2 as per the following specifications specifications: 1) part no.: 2420 2) pump model miso 125-400.3) capacity: 280 m3/hr. 4) head: 45 mtr. 5) power: +5 kw. 6) speed: 1480 rpm. 7) pump oa no. 81280327/271/28) pump make m/s wilo mather and platt pumps pvt ltd , bearing housing for mcf feed pump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no.: 2760 2) material: ci (15:210 gr fg260 3) pump model: miso 125-400. 4) capacity: 280 m3/hr. 5) head: 45 mtr. 6) power: 45 kw. 7) speed: 1480 rpm. 8) pump oa no.: 81280327/271/29) pump make: m/s wilo mather and platt pumps pvt ltd note (a) following accessories are to be supplied along with the shaft breather plig p/no. 4260, external circlip p/no. 2902-1, drain plug , neck ring for ro high pressure pump in sewage treatment plant no.2 as per the following specifications: specifications: 1) part no.: 1181 2) material cfxm 3) pump model: piso 65-250. 4) ?????tty: 140 m3/hr. 5) head 88 mtr. 6) power: 75 kw. 7) speed: 2970 rpm. 8) plump oa no, 81280327/381/29) plump make m/s wilo mather and platt pumps pvt ltd , back cover

Central Government/Public Sector

CTN :40402861

03 Jun, 2025 2.04 Lacs

Bardhaman - West Bengal

Tender For corrigendum : supply of gps 125 mud pump spares - bearing 3032312 , bering 6310 , cross head with pin , 75mm linner , piston rod , wing valve , valve seat , jack shaft , bucket carrier 75mm , spring loaded relief vavle

Solution Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors