Latest solution pump Tenders | Government solution pump Tenders

Central Government/Public Sector

CTN :45544077

23 Jun, 2026 1.60 Crore

Kollam - Kerala

Tender For procurement of pump spares - cover plate liner e4018ro55, impeller part.no.b1127a05, expeller ring part no. b029r55 (sp. for 2/1.5 bah warman pump), shaft sleeve part no. b075c21 ( sp. for 2/1.5 bah warman pump), lip seal part no. b090s10 ( sp. for 2/1.5 bah warman pump), clamp washer b011e63 for 2/1.5 warman pump, frame plate stud with 2 plain nut- part no. b039me63, adjustmet screw with 3 nut & 2 washer b001me62( spares for warman pump model, 1.5" bah centrifugal slurry pump), shaft sleeve o ring part. no. b109s10 ( sp. for 2/1.5 warman pump), impeller o ring b217s10 (2/1.5 bah, 1.5/1 bah warman pump spare), labrinth lock nut part no. b061e62 ( sp. for 2/1.5 bah warman pump), end cover part no. b02410d21 ( sp. for 2/1.5 bah warman pump), shaft key part no. b070me05 ( sp. for 2/1.5 bah warman pump), end cover shim part no. b025p10 ( sp. for 1.5/1 bah warman pump), piston ring for 2/1.5 bah warman pump - b108g02 ( sp. ), end covert set screw part no. b027me62 ( sp. for 2/1.5 bah warman pump), weir accumin 120lc mobil grease xhp222 ctn 10, part no wa120y-10, impeller for 2/1.5 bah,5vo, alloy, part no. b15127a05 ( spare for warman pump), frame plate liner part no. b15036mr55 ( sp. for 2/1.5 bah warman pump - duplicate code - use 45-4309), frame plate liner stud part no. b026me62( sp. for 2/1.5 bah warman pump), metal impeller 6v part no.c2058a05 (sp.for warman 3/2 pump), expeller - c028a05, expeller ring c029r55 for 3/2cah sp, frame plate liner c2036mr55 (3/2 cah warman pump spare), lip seal c090sqs10 (sp.for 3/2 cah warman pump), clamp bolt 3/2 & 4/3part no.c012me62 (sp.for warman 3/2 & 4/3 pump), frame plate stud with 2 nuts part no.c039me62/63 (sp.for 3/2 cah warman pump ), frame plate liner stud with nuts c026me62 steel, end cover partno.c02410d21 (sp.for 4/3 & 3/2 warman pump), labyrinth -part no.c06210d81 (sp.for 3/2 & 4/3 warman pump), bearing housing c004mg01 (4/3 cah, 3/2 cah warman pump spare), metal impeller for 4/3 6v part no. d3058a05 ( spare for warman pump ), expeller ring pt:no.cam029r55 4/3 warman pump, impeller o ring part no. d064s10 sp. for 4/3 warman pump, pu impeller for 6/4 dah, 5vc rubber part no. e4147u38 ( spare for 6/4 warman pump, expeller part no. b028d21 (sp. for 1.5/1 bah warman pump), expeller ci 6/4dam dam028, expeller ring part no.dam029mr55 (sp.for 6/4 warman pump), frame plate liner stud with one nut - dam026me62 (sp.for 6/4 dah warman pump), adjusting screw with 3 nuts and 2 washer part no. d001me62 ( spare for 6/4dah warman slurry pump), frame plate bolt 1 nut d034me63 (sp.for 6/4 dah warman pump), clamp washer d011e63 ( sp for 6/4 dah), clamp bolt & one nut ptno.d012me62, throat bush e4083r55 (6/4 dah warman pump spare), shaft dam073me05 (6/4 dah warman pump spare), lip seal d090sqs10 (sp.for pump 6/4 dah), cover plate liner part no.b1017 (sp.for 1.5/1bah warman pump), frame plate liner part no. b1036mr33 ( sp. for 1.5/1 bah warman pump), clamp bolt part no. b012me62 ( sp. for 2/1.5 bah warman pump), cover plate bolt with 2 nut-p.no-b015me62 sp: for 2/1.5 solution pump( sapre for warman pump ), grease retainer ci b 046, bearing hsng b004mg01 for 2x1.5bahp, intake joint ring b15060s01, labyrinth b062 10d81, shaft sleeve c075c21, shaft sleeve c075c21 for 4/3 & 3/2 pump, shaft ptno.c073me05 for 3/2 - pump spare, clamp washer part no. c011e63 ( spare for 3/2 & 4/3 warman slurry pump), adjusting screw with 3 nut and 2 washer c001me62 sp for 3/2, cover plate bolt 2 nuts- c015me63 for 3/2 cah, saft sleeve o ring c109s10 (3/2 cah warman pump spare), impeller o ring ptno.c217s10 (sp.for 3/2 warman pump), labyrinth lock nut ptno.c061e62 (sp.for 3/2 or 4/3 warman pu, grease retainer part no. c046d21 ( spare for 3/2 warman slurry pump ), labyrinth ptno. c06210d81 sp for 3/2 & 4/3 warman pump, shaft key-c070me05 for 3/2 cahpump, end cover gasket (shim set) c025, end cover set screw part no.b027me62 (sp.for warman 3/2 & 4/3 pump), joint ring intake c2060s01 (sp.for

Central Government/Public Sector

CTN :45354574

22 Jun, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : supply of p-353 'o' - ring 500 x 5 mm part no: -412.02 pos no: - 158 material: - epdm80 peroxide pump type: -chtr , p- 353 'o' - ring 460 x 4 mm part no: -412.01 pos no: -104 material: -viton pump type: -chtr 5/1+ 2 make: - , p353 a/b taper roller bearing 31312 / df part no. 320 for lean solution pump -1353 a/b-p235 3. a/b) .

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

Central Government/Public Sector

CTN :45421771

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For a) repairs to type-i quarters (ms building no. 246 and 254) including water supply and drainage system and arresting leakage of toilet, bath, kitchen & roof slab at parel colony under aden(wks)by. b) repairs to internal road at parel railway colony under aden(wks)by. c) dr -repairs to station building, main entrance of station and dadar terminus under aden(wks)by. d) repairs of relay room, power room & panel room and improvement of surrounding circulating area of central cabin and battery room & sp room of ssp room at matunga under aden(wks)by.

Central Government / Public Sector

CTN :45334714

17 Jun, 2026 NA

Rajahmundry - Andhra Pradesh

Tender For (1) kvr: s&t works in c/w proposed new station building.(2) gvn: improvements to water supply system duly providing 1.0 lakh liters rcc tank gvn under aden/rjy sub division. (3) gvn & pap:signalling works in c/w improvements to parking sheds in circulating area under aden/rjy sub-division. (4) godavari pushkarams: 2027 arrangements at kovvur station : signalling works in c/w augmentation of water supply/storage system and improvements to platform surfaces (pf nos 1,2,3) and and arragements at godavari station: improvements to circulating area, platform surface (pf nos 1 & 2) and improvemenmts to arrangements of officers, supervisors and staff on account of pushkarams. (5)development of new platform (pf no.6) on the other side of station at rjy and improvements to road surfaces of level crossings, rubs and lhss in the vicinity of purshkaram handiling stations (gvn, kvr & rjy). (6) gvn: provision of 2nd foot over bridge with 6 m wide at godavari station. (7) kvr: provision of 2nd foot over bridge with 6 m wide at kovvur station. 8.godavari pushkaram-2027 permanent and tempory arragngements for holding area. toilets, watering arragements at kovvur, godavari and rajahmundry stations. (9) proposed replacement with psc slabe (post tensioned) for steel girder br no.13 up ( 3 x 12.20 ) & 13 dn (3 x12.20 m) in aden/ee sub division. (10) s&t works in c/w rebuilding of existing br no.682 up & dn with rcc boxes by open cut method in sse/w/bpp section and (11) costruction foot over bridge (fob) 3m wide withramp on both sides at km 28/9-29/0 at narsapur station. (12) proposed construction of limited height subway (1 x 6.0 m x 0.25 m) at km 743/5-7 respassing location at satyanarayanpurm between bvm-akpstations (13) proposed construction of limited height subway (1 x 6.0 m x 0.25 m) at km 755/5-7 respassing location at lankelapalem between thy-dvd stations. (14) rjy: construction of two tower car sheds for bza and rjy depots and (15) bza two tower car sheds for bza and rjy depots.

Central Government/Public Sector

CTN :45293060

01 Jun, 2026 NA

Raigad - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; overhauling of pump cartridge assembly of p-353, gv lean solution pump of ammonia plant at rcf, thal unit; buyer

corporations/Associations/Others

CTN :45213314

05 Jun, 2026 NA

Cuddalore - Tamil Nadu

Tender For providing of custom bid for services - operation and maintenance of the circulating water chemical treatment system and chlorination plant including supply of chemicals

Central Government/Public Sector

CTN :45064384

12 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of spares for lean solution pump - o' ring for shaft sleeve, part no. 430.00 . moc : viton; for lean soln pump pc-4-4r , model : mc 100/4 ,sr. no. 60019; manufacturer : m/s sulzer pumps, o' ring , part no.430.02 , moc : viton; for lean soln pump pc-4-4r , model : mc 100/4 ,sr. no. 60019; manufacturer : m/s sulzer pumps., 'o' ring part no. 430.03. material : viton. suitable for lean soln pump pc-4-4r , model : mc 100/4 ,sr. no. 60019, manufacturer : m/s sulzer,, 'o' ring , part no.430.05 , moc : viton; for lean soln pump pc-4-4r , model : mc 100/4 ,sr. no. 60019;, grooved nut , part no. 462.00 , moc : steel for lean soln pump pc-4-4r , model : mc 100/4 ,sr. nos. 60019 / 60321 / 60026, make : m/s sulzer pumps india ltd., ring (ci), p.no.320.03 , for lean soln pump pc4-4r , model : mc 100/4 ,sr. nos. 60019 / 60321 / 60026, make : m/s sulzer pumps india ltd., cylindrical roller bearing no. nu 312 ecj,for pc-4 pump of ammonia-1 plant make: skf cage: steel, single row taper roller bearing, no. 31312 j2/q df, (1 pair = 2 nos of bearings arrange back to back) for pc-4 pump of ammonia-1 plant bearing, shaft part no.091.00 , moc : ss410 with locknut part no. 462.00, moc: steel (qty: 2 nos); lock washer part no. 510.00, moc: steel (qty: 2 nos); coupling key part no. 444.00, moc: en-8 (qty: 1 no.); key impeller last stage part, balance drum part no. 068.00 material : 431, deflector part no.140.00 material : ss 316 , for lean soln pump pc-4-4r ,, shaft for ammonia reflux pump p-552 part no.: 210.01 moc: ss316 pump, wearing ring stationary, pt.no: 502.01 , moc: 316 / cf-8mhf suitable for ammonia reflux pump p-552 a/b ,, fan for process condensate pump of mp stripper (p-101 a/b) of ammonia-1 plant as per the, helicoil insert for process condensate pump of mp stripper (p-101 a/b) of ammonia-1 plant as, 'o' ring , part no. 430.01 , moc : viton; for lean soln pump pc-4-4r, deflector, part no.140.01, moc: ci, for lean soln pump pc-4-4r,, deflector part no. 140.02 material : ss 316 ,for lean soln pump pc-4-4r, bearing isolator for ammonia water circulation pump (p-551) of ammonia-1 plant as per the, bearing isolator for ammonia water circulation pump (p-551) of ammonia-1 plant as per the, neck bush for process condensate pump of sgc turbine (p-403 a/b) of ammonia-1 plant as per, impeller nut for process condensate pump of sgc turbine (p-403 a/b) of ammonia-1 plant as per, thread insert for process condensate pump of sgc turbine(p-403 a/b) of ammonia-1 plant as, mpeller wear ring , pt.no:503 .01 , moc: 316/cf-8m suitable for ammonia reflux pump p, shaft coupling , pn-18.00 , moc : bs 970/080 m41 suitable for effluent pump ( storage ) , make : sulzer pumps india, impeller nut for process condensate pump of mp stripper (p-101 a/b) of ammonia-1 plant as per, o-ring for process condensate pump of mp stripper (p-101 a/b) of ammonia-1 plant as per

Central Government And Public Sector

CTN :44956007

14 May, 2026 NA

Raipur - Chhattisgarh

Tender For augmentation of existing amenities to facilitate re-development work at passenger interface area of raipur station. (this work primarily involves through repair of road surface and pot holes, construction of two nos circle chowk, replacement of rusted and corroded hydrant pipeline and other water pipeline, provision of soft barricating in roads and retroreflective boards, replacement of corroded valley gutter and roof sheet at platform shelter, repairs to chequer tiles, kota stone and granite flooring at station platform, repairs to paver blocks and development of parking near jindal garden, development of garden near vip gate and other location, construction of ac waiting hall at pf no.7, shifting of water booth, booking counter and urinal at platform no.1a, repair of sewer and rain water drain in circulating area, extension and maintenance of misting system at platform no.1,2,3,5 & 6 and provision of new misting system at platform no.7 of raipur station.)

Central Government / Public Sector

CTN :44660460

17 Apr, 2026 NA

Secunderabad - Telangana

Tender For sw 1)sc-kzj section: chz - development/improvements to station building, circulating area on 2nd entry side and provision of cop for full length on pf-1, 2 & 3 in lieu of terminal station facilities at charlapalli station. sw 2)charlapalli-construction of rpf post building at charlapalli station. sw 3) secundarabad - construction of new building of 5000 sqft for cyber cell for formation of integrated command control. sw 4) secunderabad: additional block for tte rest house with 27 beds (14-male & 13-female ttes with separate toilets), acs, kitchen, store, r.o water and furniture provision. (two packet system)

Solution Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors