Latest sound meter Tenders | Government sound meter Tenders

State Government

CTN :45313570

09 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

CTN :45333134

16 Jun, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of engine coolant elc 18 lit pail , coller nut , gasket for cylinder head cover , ball bearing 6007 , push buttons green , push buttons red , panel lamp bulb , control panel of 4point4 kw contactor , voltmeter , ammeter , frequency meter , hour run indicator , rotating rectifier assy , rotating rectifier assembly , aux contractor , automatic voltage regulator ievr2n , replacement lamp engine room light , engine yanmar 3tnv88 bgkm

CTN :45338340

17 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of hydraulic puller complete assembly consisting of hand pump, actuator,distance piece and 02 meter high pressure hydraulic hose with end fitting as per specificationmentioned in annexure -b. [ warranty period: 12 months after the date of delivery ] ]

CTN :44799777

25 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for mi-17v5 helicopter - hydraulic tank, coarse filter, contrifugal fuel pump, electrick magnatic valve, wiinch "v", winch control panel pul300, counter meter, outer holder, nozzle guide vanes 3 with supports housing, nozzle guide vane i stage, 5053 gm co2 used in aerazur 610 life raft, check valve assembly, drain valve, bell crank set, punch r15mm, h/c mooring device, vibration supressor, external pod with two locks vtdg6, distressed beacon "v", megaohm meter, fire fighting system, optical quadrant, computation and generation module, communication unit, assembly frame, code device, protractors, transducer, speed inductive, free turbine, exhaust pipe, anti torque rotor, connection with filter, bearing, needle roller bearing, air cleaner, air filter, bevel gear support, gear box driven internal, adapter,gs, temperature control device cover, rotor shaft, rod, device, rod control, bomb rack store, solonoid valve, test lamp for upk-23-250, electric drive centrifugal pump, axle, piston, casing, rod, pressure relief valve, winch control panel, piston, testing cosole set

CTN :45329993

09 Jun, 2026 373

Mandya - Karnataka

Tender For procurement of water suply items for the year of 2026-27 kothathi - pvc fiber 1.1/2pipe 10feet hand borewell, copper wire 2.5mm 90mtr, copper wire 1.5mm 90mtr, cable clamp, motor pump 6hp x 8 stg, winding wire 1.3 mm copper, winding wire 1.1 mm copper, winding wire 1 mm copper, pump 12stg, pump 8stg, motor repair charges 6 hp, motor repair charges 7.5hp, cable 3core 4 sq mm, cable 3core 2.5 sq mm, mn2 realy(14-23), auto.switch, preventer 7.5hp to 15hp, preventer upto 7.5hp, no push button, terminal block, r,y,b indicater lamp, volts.meter, amps.meter, start no push button, stop nc push button, overload realay, wiring.charges, motor repair.charges, start repair charges, lathe work fitting.charges, pump repair charges, motor lifting and eraction.charges, suction case set nbr, non slam check valve, pump shaft, teflon plate, couple, suction plate, bush(rubber+ stainlesss steel), suction, ss counter, setting sleeve, middle, bush seal, bush seal cover, impeller, diffuser, bowl, bowl bush, key, step sleeve, washer., hexbolt, square nut, patti (motor&pump), adaptor (motor&pump), pump nrv, stud, nut, safety valve, brackets, motor pipe, lamination, stator stack, body sleeve, motor shaft, rotor stack, copper lamination, pressure ring, balance ring, rotor assembly, upper.housing, grommet, connection piece, oil seal cover, oil seal rubbar, water bolt, sand guard, v-notch rubber, couple key, couple sleeve, stud ring, lock ring, bush, carbon bush, lower.housing, allen bolt, thrust bearing.plate, circlip lock, base, rocker support, rocker support nut, thrust bearing, thrust bearing segment, til-ting pad(trust pad), pcd cup, pcd plate, drain plug, stainer, cable.guard, winding wire 1.2 mm copper, boltnut 3/8, boltnut 5/8, insulation.tape, rewireable fuse 250 amps 415v, rewireable fuse 100 amps 415v, rewireable fuse 63 amps 415v, sada pannel board7.5hp to 15hp, d.o.l pannel board- 7.5hp to 15hp, sada pannel board 7.5 hp, d.o.l pannel board- 7.5 hp, hp7.5 x 12 stg pump, hp6 x 12 stg pump, hp10 x 12 stg pump, hp10 x 12 stg motor pump, hp7.5 x 12 stg motor pump, hp6 x 12 stg motor pump, plunger rod for hand pump borewell, bore hole casing for hand pump borewell, compression cone for hand pump borewell, riser pipe, bore well handle, cylinder for hand pump borewell, axcel for hand pump borewell, bearing for hand pump borewell, water tank for hand pump borewell, pedstail stand for hand pump borewell, nut & bolt for hand pump borewell, head for hand pump borewell, chain nut & bolt for hand pump borewell, baket washer for hand pump borewell, gi 1.25 inch copler/coller 32mm for hand pump borewell, connecting rod for hand pump borewell, gi 1.25 inch pipe for hand pump borewell, pvc tape roll, mrf tape, shalk threas, pvc 6inch cassing pipe, pvc 4.5inch cassing pipe, pvc 7inch cassing pipe, gi 6inch cassing pipe, gi 7inch cassing pipe, hacksaw blades 12x1/2x24t, garden pipe 1inch, garden pipe 3/4inch, lather nrv, electrofusion welding machine ef, hdpe 1.1/2inch pipe, hdpe 1.1/4inch pipe, hdpe 110mm pipe, hdpe 90mm pipe, hdpe 75mm pipe, hdpe 63mm pipe, hdpe(electrofusin fittings) 110mm tapping tee(belt type), hdpe(electrofusin fittings)110mm tapping tee (clamp type), hdpe(electrofusin fittings) 110mm end cap, hdpe(electrofusin fittings) 110mm reducer, hdpe(electrofusin fittings) 110mm equal tee, hdpe(electrofusin fittings) 110mm elbow 45, hdpe(electrofusin fittings)110mm elbow 90, hdpe(electrofusin fittings) 110mm copler/coller, hdpe(electrofusin fittings) 90mm tapping tee(belt type), hdpe(electrofusin fittings) 90mm tapping tee (clamp type), hdpe(electrofusin fittings) 90mm branch saddle(belt type), hdpe(electrofusin fittings) 90mm branch saddle(clamp type), hdpe(electrofusin fittings) 90mm end cap, hdpe(electrofusin fittings) 90mm reducer, hdpe(electrofusin fittings) 90mm equal tee, hdpe(electrofusin fittings) 90mm elbow 45, hdpe(electrofusin fittings) 90mm elbow 90, hdpe(electrofusin fittings) 90mm copler/coller, hdpe(electrofusin fitting

CTN :45319586

15 Jun, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of insertion assembly for insertion flow meter collect clamp- plain stem -rf-with 1092mm stem length , pre-amplifier model ispa 8700 make: rockwin flow meter india pvt. ltd as per specification

CTN :45311622

09 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of lab equipments - beesley s balance count : manual , overall dimension of unit : length x depth x height, 535mm x 140mm x 230mm 21 x 5.5 x 9 , net weight of the unit : 6.2 kg (13.6 lb), gsm cutter cutter type: circular, hand-operated cutting area: 100 cm ; blade : circular hardened stainless steel blade , water bath capacity : 400 ml x 12 pots; maximum temperature : ambient to 90 c; accuracy : 1 c; capacity (in liters) of main both : 25 liters (approx.); pot size : inner dia. : 79 2 mm; length : 122 mm; temperature controller : digital, pt 100 sensor ( 0.1 c accuracy); heater capacity : 3000 watts; bath size : 675 x 235 x 160 mm; power supply : single phase 220vac @ 50hz; consumption : 3050 watts; s ize(wdh) : 1100 x 350 x 250 mm; weight : 25 kg , crock meter rubbing finger shape: cylindrical; diameter: 10 0.1mm; diameter: 10 0.1mm; force: 9 0.2 n; stroke length: 100-110 mm; direction: straight line , back and front , hygrometer measurement range: 20- 80 %rh; accuracy : 2% rh; temperature measurement range: 20 - 30 c; sensor type: capacitive humidity sensor; response time 30 seconds, twist tester gauge length : 2 to 20 inch (5 to 50 cm); counting system : direct result; in-built calculations; readout in dot-matrix display; control system : microcomputer based pre-selectable / pre-programmable solid-state circuitry control user-friendly menus with membrane keypad assembly; programmable parameters : measurement unit, sample length & type, twist direction and speed index, etc.; elongation setting range : - 10 to + 100 mm; tensioning range : 1 to 90 grams (by calibrated augment weights); power supply : single phase 220vac @ 50hz; consumption : 100 watts; applicable standard(s) : astm d1422 / d1423 and is 832; physical dimensions : size (wdh) : 1000 300 200 mm; weight : 12 kg; swift/wheel circumference : 1.5 yards or 1 , yarn appearance board winder tapered board : 01 no. parallel board : 01 no; main unit : 01 no. bobbins holder stand : 01 no., crimp tester measuring length : 60 cm; tension weight : 35g; net weight of the unit: 5 kg., thickness gauge measuring range : 0.010 to 10.00 mm measuring accuracy : 0.01 mm (or) 10 microns readability : 0.01 mm; diameter of anvil : top : 75 0.2 mm physical dimensions : size (wdh) : 150 110 160 mm; weight : 4 kg (accessories included) , wrap reel meter number of leas made at a time : 10 spread of each lea : 20mm 5 counter (three digits) : digital pre-set counter with sensor operating speed : 100 5 rpm motor : 1/8 hp 230v geared motor

CTN :45292331

03 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of inetria brake , band brake , radiator dakken , screen filter , key 0401000722 , key 0401000522 , o ring , dust seal , strainer , element filter , hours meter cable , txn filter , steering filter , hydraulic filter , sereen filter , air cleaner , baby filter , connection fuel drain , air cleaner bd 80 , engine oill filter bd 80 , connection fuel inlet , filter oil , air filter , air filter element inner , air filter element outer , lub oil filter , fuel filter element , shank , tooth point tf23 , pin , tooth point hc00002 , locking plate , hyd hose rh at179975 , hyd hose lh at179983 , elbow fitting , hyd hose at175198 , hyd hose lh at179974 , hyd hose rh at179984 , pin at170043 , hyd hose 015219 , hyd hose 015220 , filter element , filter fuel assembly , water seprator assy , kit sensor water in fuel , hose top , hose bottom , element air main , element air safety , bowl , gasket turbo outlet , spring extension , kit spider unqin , tube inner rear , tube inner front , exterior mirror , element filter , filter txn , duel fuel filter element

CTN :45303357

03 Jun, 2026 7.90 Lacs

Tinsukia - Assam

Tender For supply of motorized sliding gate , boom barrier 8 meter , visitor management system , overhead shed for sliding gate and motor assembly , associated accessories

CTN :45292176

01 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of rectifier assy , elec speedo meter , fuel water seprator , release bearing , minus plate , pipe assembly , motor fuel pump , booster diaphram , lateral articulation stop , hose mm

Sound Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government