Latest spikes Tenders | Government spikes Tenders

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :44875920

02 Jul, 2026 28.42 Lacs

Pune - Maharashtra

Tender For bid to ras corrigendum : supply of wireless disposable 3 days holter patch monitoring system , wireless disposable 7 days holter patch monitoring system , polytetraflorethylene ptfe cv7 7080 cms 3 oblique8 circle round body double needle 917mm , ureteral access sheath 11 oblique13 f 36 cm , ureteral access sheath 12 oblique14 f 36 cm , ureteral access sheath 9.5 oblique 11.5 f 36 cm , ureteral access sheath 12 oblique14 f 46 cm , ureteral access sheath 9.5 oblique 11.5 f 46 cm , sodium chloride solution 0.9percent non toxic plastic bottle of 3000ml , polytetraflorethylene ptfe cv6 7080 cms 3 oblique8 circle round body double needle 917 mm , sterile eye patch with adhesive, disposable , ear buds , pva sponge sterile disposable , 20 ml buffered corneal medium with chondroitin sulphate, recombinant human insulin , dextran, stablized lglutamine, atp precursor,vitamins, trace elements, gentamycin, streptomycin and ph indicator , silicon oil injection kit 1000 centistokes 10 ml sterile pfs , lipid emulsion iv for tpn 20percent, 100 ml , echogenic ultrasound enhancing nerve stimulator needle 100mm, 20 g , echogenic ultrasound enhancing nerve stimulator needle 150mm, 20 g , echogenic ultrasound enhancing nerve stimulator needle 50mm, 22 g , endotracheal catheter mount with collapsible tubing 22 mm male oblique 15 mm female connection , with double swivel elbow and double flip top cap with seal , epidural minipack system 1, 18 g , epidural kit 20 g paediatric with fixation device , monofilament polypropylene mesh size 8cmx13cm , light weight,filament reinforced polypropylene mesh with large pore size 1.5mm and 60gm obliquem2 wt with blue guidelines 15 x15 cm ) /bid number : gem/2026/b/7315031 * /dated: 13-04-2026 & & / bid document 1 / 23

CTN :45557284

07 Jul, 2026 NA

Batala - Punjab

Tender For corrigendum : providing of repair and overhauling service - drilling machine piller sensitive 0 20 mm capacity with swivel base; r p engg co batala india; yes; buyer premises

CTN :45707583

11 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of view cutting fence (2200 mtr) in ferozepur - site clearance complete all as specified and as directed. , excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified & directed., , excavating in post holes each n. exc. 0.5 cum and getting out in soft lloose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified., , material and labour for providing cement concrete in foundations 1:4:8 type d2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed, , material only for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed., , material and labour for providing cement concrete 1:2:4 type b1 using 20mm graded aggregate as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed, , material only for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed., , supply and fix rolled mild steel fe-410 (grade e-250a) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 nos gaps/outs/holes in each post for providing/laying ppgi sheet and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed., , supply and fix rolled mild steel fe-410-w (grade e-250) quality a framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed., , supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 mpa (galvalume base-ppgl trapezoidal profile sheets) fixed with self tapping screws of size 75/100mm and aluminium washer of suitable size in view cutting complete all as specified and as directed.

Central Government/Public Sector

CTN :45731031

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of railways carriage fan, swivel type, 110v ac, 400 mm sweep with crashworthy features as per rcf am-4 (ty-xiii) with stainless steel guard to drg.no. icf/sk-7-6-158., as per drawing: is:6680-92 with rdso annexure-h (revised december-2005) rcf corr-1,3 &4 & blade as specified at col- i of rcf am-4 with rubber packing as per drawing no. icf/sk-7-3-058, alt- 'e', item-1, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45737864

21 Jul, 2026 7.94 Lacs

Patti - Punjab

Tender For supply of cement bag 50 kg , course sand , wall putty , exterior paints 20 ltr , interior emulsion paints 20 ltr , synthetic enamel paint 20 ltr , thinner , 100 mm flat brushes , 50 mm flat brushes , sand paper sheet , wooden beading patti , wire mesh , 1 inch nail , 6 mm plywood , 9 mm plywood , 12 mm plywood , 25 mm plywood , butt hinges , 35mm wood screws , 25mm wood screws , white cement , hdmr board , 4 mm plain window glass , glass putty , tower bolt , sliding door bolt , door handle , fevicol , sunmika plain brown , water storage tank white with lid having spikes

Central Government/Public Sector

CTN :45730930

05 Aug, 2026 NA

Ajmer - Rajasthan

Tender For supply of assembled adjustable swivel elbow (elastometric seal )as per drg no. ew10lred cf of m/s parker or1159102007 of m/s voss or st ewvd 10lr1/4 wd of m/s volz or (pewvd 10l + ges 10 lr - wd ) of m/s eaton - walterscheid or eel10 r1/4 wd dko of m/s blange armaturen gmbh-blago or equivalent. packing instruction-pi042. as per rcf mdst-108 rev.1. for lhb coaches. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Central Government/Public Sector

CTN :45737565

16 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of stainless steel ss304 two stage trolley with 2 nos of fabricated trays at 1.6mm thick sheet and depth 150mm, trolley size 625 x 540 x 950mm fitted into 10mm tube fabricated frame and verticals made of 25mm tube, two side pipe handle with 4 nos swivel nylon wheels as per drg.no:sr.dee/rs/ed/misc 398. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45737625

30 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For hose connection for 3/4 inch bore in the length of 1100mm & 4 nos. of duplex nipples, (hose end fitting shall be one end fixed & other swivel type ) specification as per sae 100r 1, testcertificate for various test as per sae j343 shall be submitted along with supply. the house ends shall be provided with crimping suitable for high pressure confirming to that of house. the end fitting (male & female flareless type) shall be made from is-2062e250c, steel & shall be zinc electroplated to is:1573 grade-2, the manufactures identification marks and month and year of manufacture shall be suitable printed or engraved, end fittings and adaptor threads should confirm to is-554, used in icf bogie of 1400 hp demu/dpc [ warranty period: 30 months after the date of delivery ] ]

CTN :45405814

03 Jul, 2026 NA

Kharagpur - West Bengal

Tender For corrigendum : supply of bfb steady arm eye swivel r.i. no. 2542 as per rdso's spec ti/spc/ohe/fittings/0130(10/13) with a&c slip 1 , eti/ohe 13[4/84] may 2018 print with a&c slip 1-4 , rdso's drg. no. eti/ohe/p/2542 (mod. -c) or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Spikes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector