Latest spiral slide Tenders | Government spiral slide Tenders

State Government

CTN :45268829

09 Jun, 2026 NA

Satna - Madhya Pradesh

Tender For 2026_mpfd_2026_27_03 open gym equipment - straight frp slide web slides spiral slide two-seater hammock four-seater circular/merry-go-round type swing four-seater see-saw multi-play system (including hexagonal deck) item b air walker single single abdominal bench body balance chest press leg press double cross trainer single shoulder press surf board pendulum cycle double

Central Government/Public Sector

CTN :45075081

25 May, 2026 14.36 Lacs

Lucknow - Uttar Pradesh

Tender For annual maintenance contract of fitness equipment at sai nsrc lucknow - list of fitness equipment s, treadmill, solid glute ham machine, leg extension, pt10 treadmill, xb 7300 upright bike, xb 7500s recumbent bike, xe 74000hrc elliptical, pllp leg press, slc-400g/2 leg curl, sot-1800g/2 rotary torso, sam-900g/2 ab machine, sbk-1600g/2 back machine, dpec-sf pro dual pec dec/rear delt, slm-300g/2 lat machine with mid row, sbc-600g/2 bicep curl, sbp-100g/2 chest press, srm-1700g/2 seated row, stm-1000g/2 tricep, mdr-1300 deltoid lateral raise, msp-800 shoulder press, mdc-2000 dual cable column and chin up/dip, dclp-sf pro dual leg press/sitting calf, fcd-stk weight assist knee raise, dip & chin, sfb-349g flat olympic bench, sfb-359g incline olympic bench, sdb-351g decline olympic bench, ghyd-345 hyper extension, ssm-350g counter balanced smith machine, gpcp329 preacher curl bench, gap-60 pro style ab board, rowing machine, adductor/abductor, wattbike pro gym bike, wattbike pro gym bike, cosco stair climber, elliptical trainer, elliptical trainer, spin bike, spin bike, xb-76008 recumbent bike, multi olympic bench, glute ham machine, glute ham machine, glute ham machine, glute ham machine, glute ham machine, glute ham machine, leg press, leg press, leg extension, leg extension, leg extension, leg extension, leg press, leg press, leg extension, leg extension, leg extension, leg extension, hyper extension, hyper extension, hyper extension, hyper extension, ab bench, ab machine, ab machine, chin up / dip bar, chin up / dip bar, inner / outer, inner / outer, multi gym station, curve treadmill, power squat machine, spin bike, run rocket, upper body trainer, treadmill, fan bike, multi gym station, sled machine

corporations/Associations/Others

CTN :44823291

15 May, 2026 10.00 Lacs

Adityapur - Jharkhand

Tender For corrigendum : supply of physiotherapy and massage items d d - shortwave diathermy , hydrocollator , ultrasound therapy , tens , ift , traction unit , muscle stimulator , plate form mounted parallel walking bar , exercise training staircase with ramp , postural training mirror , suspension apparatus with gears and couch , continuous passive movement , upper body active trainer , cuff weights , recumbent bike , standing frame

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

CTN :44952979

11 May, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply and installation of park equipment items - name of items & product diamensions, climb n swing playcentre (age group 6-12 year) (product dimensions 25.0x24.0x13.0 ft) a) u shaped roof 01 no.b) leaf 01 no.c) tunnel slider 3 ht 01 no.d) spiral slider 3 ht 01 no.e) panel 01 no.f) entrance stepper 01 no.g) ms perforated sq.deck 02 nosh) ms bridge 01 no.i) ms box ladder 01 no.j) ms swing set 2 seater 01 no., tunnel house playzone (age group 6-12 year) (product dimensions 22.9x22.9x13.0 ft) a) ufo roof 01 nob) single ufo roof 02 nos.c) tunnel slider 5 ht 01 no.d) double slider 5 ht 01 no.e) wavy slider 5 ht 01 no.f) ring tunnel 02 no.g) ms perforated sq.deck 03 nos.h) step ladder 02 no, tube n slide playcentre (age group 3-6 year) (product dimensions 12.0 x 11.0 x 5.6 ft) a) curve plastic ladder 01 no.b) tunnel slider 01 no.c) slide 01 no.d) square deck 01 no., maxi combo playcentre (age group 3-6 years) (product dimensions 16.4 x 4.0 x 5.0 ft) a) curve plastic ladder 01 no.b) square deck 02 nos.c) tunnel bridge 01 no.d) slider 01 no., kids castle sr. playcentre (age group 3-6 years) (product dimensions 69 x 13.0 x 7.2 ft) a) hut shaped roof 01 no.b) plastic ladder 01 no.c) square deck 02 nos.d) tuneel slider 01 no.e) slider 01 no., villa tube playcentre (age group 3-6 years) (product dimensions 9.0 x 4.0 x 7.5 ft) a) hut shaped roof 01 no.b) tunnel slider 01 no.c) squre deck 01 no, ultra slide fun (age group 4-14 years) (product dimensions 9.3 x 1.8 x 4.6 ft) a) slide (3.4 ft), garden shack (age group 3-6 years) (product dimensions 10.5 x 3.25 x 5.9 ft) a) slider 01 no.b) curve stair 01 no.c) roof 02 nos.d) side panel 02 nos.e) deck 01 no., fun n slide playcentre (age group 6 -12 years) (product dimensions 21.0 x 21.0 x 14.0 ft) a) animal shaped roof 01 no.b) flower 01 no.c) spiral slider 5 ht 01 no. d) double slider with entrance 3 ht 01 no.e) panel 02 nos.f) ms perforated sq.deck 03 nos.g) ms box ladder 01 no.h) ms swing set 02 seater, adventure land (age group 3-6 years) (product dimensions 24.6 x 16.4 x 5.9 ft), hop n slide playcentre (age group 6-12 years) (product dimensions 25.0 x 15.0 16.0 ft) a) u shaped roof 01 no.b) flower 01 no.c) leaf 01 no.d) tunnel slider 3 ht 01 no.e) spiral slider 7 ht 01 no.f) wavy slider 5 ht 01 no.g) panel 01 no.h) entrance stepper 01 no.i) ms perforated sq.deck 02 no.j) ms box ladder 01 no., car spring rider (age group 4-12 years) (product dimensions 2.7 x 1.4 x 2.9 ft), the house jumbo (age group 3-6 years) (product dimensions 14.75 x 9.8 x 5.9 ft) a) slider 02 nos.b) small house side panel 02 nos. c) small house roof 02 nos.setd) bridge panel 02 nos.e) bridge base 02 nos.f) bridge deck 01 no.g) big house roof 02 pcs.seth) big house window panel 01 no.i) entry sliding support 02 nos.j) big house base 02 nos.k) big house deck 02 nos.l) big house slid panel 02 nos.m) curve stair 01 no. , timber land (age group 3-6 years) (product dimensions 11.5 x 9.8 x 5.9 ft) a) slider 01 no.b) curve stair 01 no.c) roof 02 pcs. setd) side panel 02 nos.e) deck 01 no.f) swing iron rod 01 no.g) swing side panel 01 no.h) swing seat with chain 02 nos., multi activity maxi centre (age group 6-12 years) (product dimensions 23.0 x 10.0 x 11.0 ft) a) u shaped roof 01 no.b) flower 01 no.c) leaf 01 no.d) part slider with entrance 3 ht 01 no.e) ms step hopper 01 no.f) see saw 2 seater 01 no.g) ms swing single seater 01no

CTN :44895566

06 May, 2026 NA

Paradip - Odisha

Tender For supply of furniture and sports e e - desk cum bench , teachers table , teachers chair , spiral slides , see saws , play log bridge , swing , blackboard

State Government

CTN :44751029

17 Apr, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For corrigendum : providing of facility management services - lumpsum based - commercial; providing and fixing 4 hp heavy duty ac motor incline range total 3 nos; consumables to be provided by service provider (inclusive in contract cost),facility management services - lumpsum based - commercial; providing and fixing air bike total 1 nos; consumables to be provided by service provider (inclusive in contract cost),facility management services - lumpsum based - commercial; providing and fixing recumbent bike total 1 nos; consumables to be provided by service provider (inclusive in contract cost),facility management services - lumpsum based - commercial; providing and fixing fitclimber total 1 nos; consumables to be provided by service provider (inclusive in contract cost),facility management services - lumpsum based - commercial; providing and fixing pro skier total 1 nos; consumables to be provided by service provider (inclusive in contract cost),facility management services - lumpsum based - commercial; providing and fixing fitline

CTN :44395753

15 Apr, 2026 NA

Porbandar - Gujarat

Tender For bid to ras supply of procurement of gymnasium equipments g g -motorized treadmill , elliptical cross trainer three level manual incline self generator , recumbent bike , spin bike , aero power rowing machine , pec fly rear delt , pull down mid row , incline level row , seated calf , flat bench , dumbbell rack three layers , shoulder press , leg extension leg curl , multi functional bench , rod stand for 10 rods , plate rack , olympic flat bench , aerobic stepper small , gym durable rubber rolls and interlocking mats , motivational posters

Corporations And Associations And Others

CTN :44771811

14 Apr, 2026 10.45 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi. - supply & installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi., supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer in charge.), supply and fixing of frp box slide.ladder-frame-25mm n b pipe. handdril-20 mm n b pipe. support-40 mm n b pipe. area : 4.8 m x 0.5 m. platform height : 2.1m. chute :4.0 mm thk f r p. chute length: 4 m. step-width- 75mm. thread 90mm. riser 250mm. the main frame of 2.1mtr height plat-form having pipes are of 40 mm nb b class gi pipe. the box slide is of material frp (fibre reinforced plastic) with attractive beauty colour and flat surface at end of slide for safe landing. the reeling made from 20 mm nb b which can be use like handle to get a grip while start sliding. -the staircase made from 25 mm nb b class g.i. pipe. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing o

Spiral Slide Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government

Corporations And Associations And Others