Latest spiral slide Tenders | Government spiral slide Tenders

corporations/Associations/Others

CTN :45072442

01 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of olmypic flat bench , olympic incline bench , olympic decline bench , pec fly machine , smith machine , lat pull down , leg curl machine , leg extension , shoulder press , seated rowing machine , leg press machine , plate rack , dumbbell rack , olympic rods , preacher curl machine , preacher curl bench , chin up bar , multi adjustable bench , weight plates , dumbbells , multifunctional home gym

CTN :45330876

15 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of fitness and training gymnasium equipment with allied accessories - cable cross over , lat pull down hammer , shoulder press lateral , multi chest press , leg curl leg extension , seated rowing hammer , m3 olympic ez curl bar , m3 cambered bench press bar , olympic open trap bar , multi grip olympic swiss bar , classic 7 ft strongman axle bar , multi grip 10 strongman log , 7 ft olympic safety squat bar , olympic plate (480 kgs) , air bike , treadmill thor , abs crunch machine , chest press machine , seated rowing machine , 4 multi station gym , gym ball , yoga mat ,

State Government

CTN :45268829

09 Jun, 2026 NA

Satna - Madhya Pradesh

Tender For 2026_mpfd_2026_27_03 open gym equipment - straight frp slide web slides spiral slide two-seater hammock four-seater circular/merry-go-round type swing four-seater see-saw multi-play system (including hexagonal deck) item b air walker single single abdominal bench body balance chest press leg press double cross trainer single shoulder press surf board pendulum cycle double

CTN :45252474

03 Jun, 2026 NA

Rajauri - Jammu And Kashmir

Tender For supply of motorized treadmill , elliptical cross trainer , aero power rowing machine , adjustable pulley , smith machine , hip thrust , t bar row incline lever row , pull down machine , rear delt pec fly , shoulder press , lat pull down low row , adductor abductor , 45 degree leg press hack squat combo , adjustable bench si , plate rack , triangle colour rubber plates , dumbbell

Central Government/Public Sector

CTN :45075081

25 May, 2026 14.36 Lacs

Lucknow - Uttar Pradesh

Tender For annual maintenance contract of fitness equipment at sai nsrc lucknow - list of fitness equipment s, treadmill, solid glute ham machine, leg extension, pt10 treadmill, xb 7300 upright bike, xb 7500s recumbent bike, xe 74000hrc elliptical, pllp leg press, slc-400g/2 leg curl, sot-1800g/2 rotary torso, sam-900g/2 ab machine, sbk-1600g/2 back machine, dpec-sf pro dual pec dec/rear delt, slm-300g/2 lat machine with mid row, sbc-600g/2 bicep curl, sbp-100g/2 chest press, srm-1700g/2 seated row, stm-1000g/2 tricep, mdr-1300 deltoid lateral raise, msp-800 shoulder press, mdc-2000 dual cable column and chin up/dip, dclp-sf pro dual leg press/sitting calf, fcd-stk weight assist knee raise, dip & chin, sfb-349g flat olympic bench, sfb-359g incline olympic bench, sdb-351g decline olympic bench, ghyd-345 hyper extension, ssm-350g counter balanced smith machine, gpcp329 preacher curl bench, gap-60 pro style ab board, rowing machine, adductor/abductor, wattbike pro gym bike, wattbike pro gym bike, cosco stair climber, elliptical trainer, elliptical trainer, spin bike, spin bike, xb-76008 recumbent bike, multi olympic bench, glute ham machine, glute ham machine, glute ham machine, glute ham machine, glute ham machine, glute ham machine, leg press, leg press, leg extension, leg extension, leg extension, leg extension, leg press, leg press, leg extension, leg extension, leg extension, leg extension, hyper extension, hyper extension, hyper extension, hyper extension, ab bench, ab machine, ab machine, chin up / dip bar, chin up / dip bar, inner / outer, inner / outer, multi gym station, curve treadmill, power squat machine, spin bike, run rocket, upper body trainer, treadmill, fan bike, multi gym station, sled machine

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

CTN :45138585

30 May, 2026 14.65 Lacs

Ernakulam - Kerala

Tender For supply of edpm flooring , air walker , leg press (single) , twister , rider , chest press (single) , pull-up & dip station , sit-up bench (single) , shoulder wheel , parallel bars , monkey bars , rowing machine , stepper machine

CTN :44875740

13 May, 2026 NA

Siang - Arunachal Pradesh

Tender For bid to ras supply of construction work , commercial ac motorized treadmill , elliptical cross trainer , upright exercise bike , multi station gym , smith machine , bench press , pull down machine , leg press machine , shoulder press machine , dumbbell set with rack , adjustable utility bench , barbell and weight plate set , rowing machine , additional setup

State Government

CTN :45082688

12 May, 2026 16

Mangalore - Karnataka

Tender For short term re tender -supplying & erecting of gym equipments to the ladies hostel at mangalore university under aicte cafes project - treadmill, stationery air bike, elliptical cross trainer, rowing machine, cross walker, air walker, spinner, cycle, seated chest press, sit up station, leg press, pull up chair, waist twister, shoulder wheel, seated row, rider

Spiral Slide Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government