Latest spring charging motor Tenders | Government spring charging motor Tenders

Central Government/Public Sector

CTN :44996130

04 May, 2026 NA

Multi City - Chhattisgarh

Tender For repair of 12 hp dc motor of blast furnace tilting drive, armature & field body repair, commutator repair etc.

corporations/Associations/Others

CTN :45002978

23 May, 2026 31.48 Lacs

Bacheli - Chhattisgarh

Tender For providing of custom bid for services - repair of 03 no 195 hp dc propel motor armature , 03 no 130 hp dc crowd motor armature and replacement of one no rotor shaft of crowd motor armature of electric rope shovels 182m

corporations/Associations/Others

CTN :44999558

23 May, 2026 31.48 Lacs

Bacheli - Chhattisgarh

Tender For repair of 03 no 195 hp dc propel motor armature, 03 no 130 hp dc crowd motor armature and replacement of one no rotor shaft of crowd motor armature of electric rope shovels 182m

Central Government/Public Sector

CTN :44550164

04 May, 2026 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : supply of lt circuit breaker at vindhyachal and allahabad substation e e - supply of 415v 3400a 75 ka 3-pole ac lt air circuit breaker and accessories for retrofitment as per attached ts and sow , retrofitment kit with copper bus thickness 8mm width 10cm for supplied acb , retrofitment of new lt air circuit breaker in acdb including dismantling of old circuit breaker , spring charging motor , aux. contact sets , bus bar seal off insulators , arc-chutes , moving contacts , arcing contacts fixed moving , springs closing opening , closing coil with resistor , tripping coil with resistor , supply of 415v 1000a 3-pole ac lt air circuit breaker and accessories for retrofitment as per attached ts and scope of work , supply of 415v 800a 3-pole ac lt air circuit breaker and accessories for retrofitment as per attached ts and scope of work

State Government

CTN :44981984

08 May, 2026 5.12 Lacs

Multi City - Telangana

Tender For repair and rewinding of main fields and composite winding of kirloskar make 90kw dc, 400v , 900/1800 rpm, frame no: khdc315l d.c. shunt and compound wound motor used for wagon tippler operation and repair and complete rewinding of kirloskar make 5.5kw, 440v, 1500 rpm, frame no: kldc160lx , d.c. motors used for traverse operation of old stacker cum reclaimer (s/r) pertaining to lt/em/chp/ktps-v and vi stages.

CTN :44961942

04 May, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

CTN :44969627

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of mechanical spares and works - 1" u clamp bolt, 1" union, 1"x6m jindal gi pipe, 1.5" barrel nipple, 1.5" brass ball valve, 1.5" gi elbow, 1.5" gi tee, 1.5" gi union, 1/4x12 pu connector, 100x75 allen key bolt, 10mm drill bit, 10x75 gi nut bolt washer, 16mm tap, 16x200 anchor fastener, 212 bearing, 220 gear oil, 25x5 ms flat, 2.5" gasket, 2.5mm ms plate/17 sheet, 2500x470x50 water drop tray, 300x25x5mm ms flat, 3mmx4ftx8ft ms plate, 4x8x5mm acrylic sheet, 5/8x6 ms nut bolt with washer, 5mmx5ftx8ft ms plate, 6 inch bench vice, 6mm hex lock nut with washer, 6x65 allen cap screw, 8x25 bolt, 8x75 bolt, allen m10x75mm hex central column, ambika o ring, appu cake 10 kg event, barrel hand pump, bearing bush, bearing pin, brass bush 1/2x1/4, cake 1 kg for event, clutch drive, cylinder transportation bangalore/ram sir, df oil, momento for events and visitors, dpt conveyor load head, dpt conveyor load head hook, dpt conveyor overhead load head, dpt conveyor u clamp head, dpt shed air compressor local box, festo cylinder 40/300, file 6 inch, gas cutting torch, gasket 48 central column, gd lower bell, gear and shaft 4 inch, gi elbow 1", gi elbow 1.5", gi elbow 1x1/2", gi long bend 1/2", gi nipple 1.5"x2", gi nipple 1.5"x4", gi pipe 1.5" jindal, gi reducer 1x1/2", gi reducer tee 1x1/2", gi reducing elbow 1x1/2", gi saddle cleat 1.5", gi sheet 4x8x1mm, gi socket 1", gi tee 1", gi tee 1.5", gi union 1", gi union 1.5", gm ball valve 1.5", gm float valve with ball 1 inch, gm nrv horizontal 25mm, gm nrv isi screwed 1.5", ht full threaded rod 1m, ht lock nut 16mm, ht nut m16, hydraulic 68 oil, hydraulic hex nipple, hydraulic hose 3/4"x1m, hydraulic hose pipe, hydraulic jack 25 ton, ice pick, joy l150 coupling, l95 coupling with bore, lerc cylinder courier charges bangalore, m seal, metal gasket, ms elbow 150 class, ms reducer 150 class, ms sch 40 b/w elbow 50mm, ms sch 40 reducer, ms socket forged 3/4", nilkamal pallet trolley, nut bolt 6x20, nut bolt 8x40, orange helmet karam, ovcm machine cylinder new, ovcm machine cylinder rod modification, ovcm shaft length work, pneumatic long head silencer 3/4", polish paper, ps paper, pu connector 1/2", pu connector 1/2"x12, pu connector 1/2x1/4, pu connector 1/4x8, pu connector 3/8x8, pu pipe 8mm, pump motor shaft straightning and impeller repair, quarter pin, rubber hydro testing seal, rubber sheet 5mm, rubber washer o packing, sealing unit hose pipe ss grade 2m, seamless pipe 50nb sch 40 js, skf bearing, skf bearing 32206, skf bearing 6012, skf bearing 6024, skf bearing 6026, skf bearing 6303 zz, skf bearing 6304 2z, soap, spider l95, ss ball 150mm od, ss ball valve 1/2" threaded, ss blind flange 6 inch, ss cfb ball valve 1.5", ss cfb ball valve 2", ss nipple 1.5"x6", ss nipple 2"x6", ss rod 8mm, ss sheet 4x8x1mm, ss sheet 4x8x3mm, ss water bottle, sumo o ring, t 8mm, tap handle, taparia 450mm adjustable pipe wrench, teflon trolley wheel 6 inch, tyre coupling, v seal 16/24/5, v seal 22/16/4, washing unit sprinkler, lpg conveyor chain (carbon steel), solenoid valve 1/2" 24v dc, ptfe thread sealant tape 12mm, pressure gauge 0-10 bar 63mm, temperature gauge bi-metal 0-120c, limit switch conveyor roller type, proximity sensor inductive 12mm, stud bolt m20x100 ss316, hex nut m20 ss316, copper crush washer 1" lpg rated, teflon bush 50mm od, nylon roller 100mm dia, torque wrench 1/2" dr 40-200 nm, chain block 2ton, old head guide rod supply, media converter, omron smps, wire rope sling 5t 2m, drill machine check nut, jk drill bit high speed, 4' polish wheel, 10x45 alenkey nut bolt 48 corsol, tube(pu) od4 (blue), tube(pu) od6 (blue), tube(pu) od8 (blue), 1 1/4 5/2 single ext. pilot valve, 1/4 5/2 double ext. pilot valve, or valve g1/4

CTN :44970441

09 May, 2026 NA

Jodhpur - Rajasthan

Tender For providing of repair and overhauling service - wheeled skid steer loader (v2) as per is / iso 7131 (latest); repair of dc series motor 1440 rpm 36v 6 hp; yes; buyer premises

Central Government And Public Sector

CTN :44802315

02 May, 2026 NA

Angul - Odisha

Tender For corrigendum : providing of custom bid for services - repair of 350 kw dc kneader motor of gap-2, carbon area through oem (m/s abb india ltd) at their works