Latest square bars Tenders | Government square bars Tenders

CTN :44688270

02 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For bid to ras corrigendum : supply of boring bar s 50 w- pclnr-19 make: sandvik/taegutec/kennametal

CTN :45140088

02 Jul, 2026 3.79 Lacs

Nagpur - Maharashtra

Tender For bid to ras corrigendum : supply of boring bar to iso key code, s25s svqcr16 with 02 set of spar es. , a external threading tooling set consist of: - (a) 1 no external threading tool holder to m/s. vardex k , set of external threading tooling set consist of i-lock rh threading tool holder: 266rfg-2525-16= 01

CTN :45733165

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 2/a ,7/a & ground floor at near bin -37.exmp.06.2026-27.03 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as- scrap aluminium cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, wiper motor, bus bar connector (aluminium), part of filter element of emu motor coaches, compressor & air dryer spares, horn, gauge cover, piston sub assembly, and other aluminium misc.as in the lot which are kept in bin no-2/a & ground floor of near bin 37. qty= 1929 kgs. b) scrap aluminium rear & front cover with or without rubber and grease attachment. in bin no- 7/a . qty- 2462 kgs. loading will be done by purchaser's own arrangment.

Central Government/Public Sector

CTN :45703924

17 Jul, 2026 NA

Koraput - Odisha

Tender For tender for supply of special holder insert and spare - insert , insert , insert , insert , insert , insert , insert , insert , inserts , insert , insert , insert , insert , insert , insert , insert , insert , insert , insert , insert for machining nimonic alloy , insert for machining nimonic alloy , holder , holder , holder , holder , holder , holder , turning holder , holder , boring holder , boring holder , boring holder , boring holder , boring bar , boring bar , boring bar , boring holder , shim for holder pclnr/l 12 , shim pin for pclnr / l 12 , lever screw for pdjnr/l 15 , insert screw for sclcr / l 06 , shim for holder pdjnr/l 15 , shim for holder sdjcr/l 11 , shim screw for sdqcl / r 11 , lever screw for pclnr / l 12 , insert screw for sdjcr / l 11 , insert screw

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

CTN :45704330

17 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For lh steel boring bar shank dia 16mm, oal-200mm max entering dia 18mm iscar code-e16r swlnl-04 or equi , double sided 6-cutting edges turning insert for super finishing application with r 0.2mm iscar code-

CTN :45702689

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfc-1.bin no- 7.exmp.06.2026-27.08 description- scrap copper lump & sheets (comprising of fire bronze pieces, plats, stays, rivets, stude, rods, pipe etc) copper wire without insulation. copper boring & turning. our offer:- scrap copper miscellaneousllaneous with or without iron attachment. such as- rt dropper clip, catenery clip,contact tips for cgr (only copper), contact liver for cgr, bus bar, copper boring, plier, flexible shunt and mobile contact, scrap copper pipe,transformer oil cooler tube, rectifier bus bar , loop copper pipe, loader unloader pipe for a/c, half round oval contact copper, finger contact, stud bolt, copper ferule, carbon brush copper pigtail, copper tube, blow out coil for line contactor, r b shunt, shunt for armeter, blow out coil for shunting contactor, battery isolation switch, copper connecting angle, copper briddle wire, ptfe neutral section runner, section insulator runner, copper tubular terminal, discharge valve, copper socket, set of electrode & nozzle & other copper miscellaneousllaneous in bin no-7. qty=3686 kgs. loading will be done by purchaser's own arrangement.

CTN :45673158

08 Jul, 2026 NA

Sultanpur - Uttar Pradesh

Tender For 41004000382 solid steel boring bar dia. 16mm with internal cooling supply, overall length min. 170mm, , 4100400383 iso turning insert ccmt 09t304 for boring bar dia. 16mm, suitable for steel alloys upto 35 , 4100400384 insert screw for boring bar dia. 16mm , 4100400385 key/spanner for insert screw of boring bar dia. 16mm

corporations/Associations/Others

CTN :45661832

02 Jul, 2026 1.87 Lacs

Kolkata - West Bengal

Tender For supply and installation of mechanical items for the tubewell at jogendra garden (wd-107) big-dia tubewell and other 19 nos. big dia tubewell under garfa big-dia t/w unit - chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 100, chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 150, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (i) 100 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (k) 150 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (h) 80 mm dia. (ii) medium quality, building works (f) structural steel works, grills, gates etc. b. repairing 2. welding in m.s. structural work withgas or electric: (b) continuous weld, building works. (u) - additional items : 20) supplying, fitting & fixing different factory made metal craft sheet (excluding cost of metal crafting) incluing cost of powder coating (for m.s, aluminium plate) & finished metal sheet with all fitting accessories complete in allrespect as per diection of engineer-in-charge. a)mild steel plate. i) 2.0mm thick, plumbing works (a)-(ii) g.i. pipe works and fittings 19(i) supplying, fitting and fixing pvc pipes of approved make of schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. tting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. payment for painting will be made seperately) (a) for exposed work pvc pipes (dia) (h)80 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (n) 300 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (l) 200 mm, resting ring : fabrication and supply of protection device (resting ring) made from m.s. iron of size:o.d.10", i.d. 7" thickness 3/4" duly cross supported by 1/2" x 1/2" x 10" m.s. square bars welded firmly at all the ends complete., erection clamp - 4" dia : fabrication & supply of 4" dia erection clamp made from 1/2" x 4?" x 27" m.s. iron flat with making of 4 nos. 5/9" dia bolt holes and supplying of 4 nos. 5/8" dia x 3" long m.s. full thread bolts with nuts and washers., sub total, gst 9 %, gst 9 %, cess 1%

CTN :45666428

07 Jul, 2026 NA

Sultanpur - Uttar Pradesh

Tender For 4100401012 iso turning carbide insert dcmt070204fp, finishing geometry with positive rake face angle , 4100401077 left hand boring bar dia. 10 mm, bore entry dia. min. 13 mm, carbide shank, shank dia. min. 10m , 4100401115 suitable insert screw for left hand boring bar dia 10 mm , 4100401116 suitable key/spanner for left hand boring bar dia 10 mm

Square Bars Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others