Get complete information related to latest Square Bars Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Square Bars Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Square Bars Tenders.
Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned heavy melting items such as hook draw bar screw coupling parts , control arms and lower and upper cover traction centre ,coupler cutting parts such as side bearer assembly, yoke , front plate bearing plate, rear plate , align screw, leaf spring ,carrier assemble and scrap tm m.s items such as t m rotor parts, rotor core lamination ,end sheild , m s pinion , transmeter wheels ,msu ,leg chain string , alternator shaft,casing blower casing,front chember,piston,plate,oil pump part,darft gear, pinion,heavy loco parts,tsc exhaust chamber parts,liner,cbc housing casing, power assembly parts ,head ,joints,knucles, roll bar link,gear case cover , con rod knuckle bc parts , dv parts ,caliber & cylinder, plunger,and other types of coupling and heavy melting items etc. in dismenteled and broken condition. scrap items with or without minor nf/ss, rubber etc attachments etc (qty approx).
Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf gslrd coaches 4 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following 9 reclaimable mechanical rc items common to all 4 coaches - 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinder 4 nos, 5] main doors -6 nos, 6] wearing piece( bronze) and plate 4 nos each, 7] distributor valve complete full set 1 set, 8], cut off angle cock- 4 nos, 9] dirt collector- 2 nos.. 1} coach no. special repair gslrd 056750 (year built 2005), ds-8 no. 334706 dt 02.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 15 nos, 6] 2w led lamp 4 nos, 7] 5 w led lamp 4 nos 8] side lamp 2 nos 9] tail lamp 2 nos 10] toggle switch 17 nos 11] rotary switch with panel board- 1 no 12] v belt- 4 nos, 13] axle pulley- 1 no 14] alternator to regulator copper wire- 1 kg. 2} coach no. special repair gslrd 051121 (year built 2005), ds-8 no. 334707 dt 21.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 14 nos, 6] 5 w led lamp 4 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 2 nos 15] vrla battery - 19 nos, 16] battery tray 4 nos..3} coach no. ner gslrd 073723 (year built 2007), ds-8 no. 334712 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 1 no 15] vrla battery - 19 nos, 16] battery tray 4 nos. 17] luggage light 4 nos ..4) coach no. nr gslrd 064925 (year built 2006), ds-8 no. 334713 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] switches 15] emergency lamp unit- 2 nos 16] vrla battery - 19 nos, 17] battery tray 4 nos. 18] luggage light 4 nos...custodian sse/ c&w/ shoranur. location: 3 coaches stabled at ioh shed premises/ shoranur coach no 051121 presently available at road no 12 shoranur yard, it is to be shifted to ioh shed siding for cutting/delivery by the custodian.
Tender For auction sale of rolling stock - condemned bg 8 wheeler non-ac coaches with all available ferrous-non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) distributor valve complete set, 2) buffer plunger with buffer casing complete set, 3) screw coupling with draw bar hook complete set, 4) aluminium water tanks . coach nos.- 1) kr/swr gslr 97763, 2) nr gslrd 044728 ,3) wr gslr 997191, = 3coaches, ds8 no: 232867,dt 08.09.2025, pl.no.98111061, location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government, 2) all rc items should be handed over to custodian at respective locations . 3)bio toilets should be defaced before delivery.4)rate per number should be quoted , 5)coaches are in grounded condition(bogies and wheel sets are removed). 6)cutting permitted to loadable sizes only. 7) crane loading may be permitted. 8) purchaser should take safety precaution while cutting/delivery of wagons. 9) rate per number should be quoted.
Tender For supply and installation of mechanical items for the tubewell at jogendra garden (wd-107) big-dia tubewell and other 19 nos. big dia tubewell under garfa big-dia t/w unit - chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 100, chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 150, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (i) 100 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (k) 150 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (h) 80 mm dia. (ii) medium quality, building works (f) structural steel works, grills, gates etc. b. repairing 2. welding in m.s. structural work withgas or electric: (b) continuous weld, building works. (u) - additional items : 20) supplying, fitting & fixing different factory made metal craft sheet (excluding cost of metal crafting) incluing cost of powder coating (for m.s, aluminium plate) & finished metal sheet with all fitting accessories complete in allrespect as per diection of engineer-in-charge. a)mild steel plate. i) 2.0mm thick, plumbing works (a)-(ii) g.i. pipe works and fittings 19(i) supplying, fitting and fixing pvc pipes of approved make of schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. tting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. payment for painting will be made seperately) (a) for exposed work pvc pipes (dia) (h)80 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (n) 300 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (l) 200 mm, resting ring : fabrication and supply of protection device (resting ring) made from m.s. iron of size:o.d.10", i.d. 7" thickness 3/4" duly cross supported by 1/2" x 1/2" x 10" m.s. squarebars welded firmly at all the ends complete., erection clamp - 4" dia : fabrication & supply of 4" dia erection clamp made from 1/2" x 4?" x 27" m.s. iron flat with making of 4 nos. 5/9" dia bolt holes and supplying of 4 nos. 5/8" dia x 3" long m.s. full thread bolts with nuts and washers., sub total, gst 9 %, gst 9 %, cess 1%
Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalizing stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxy. cut ferrous ball bearing, miscellaneousellaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar ,ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousellaneous ferrous items etc. as available in the lot, except any non ferrous. qty-150mt. location-east of vm road in ncb- 08.
Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81039019379 bwta (2) nr 81039019096 bwta (3)cr 81018560175 bwta (4)nr 81039019331 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(79.120 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(79.120 mts) on approx basis , advice note no.25-03385 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot
Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81038960337 bwta (2) nr 81038660169 bwta (3)nr 81038760081 bwta (4)nr 81039219236 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(79.120 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(79.120 mts) on approx basis , advice note no.25-03385 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot
Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81038960085 bwta (2) nr 81038918123 bwta (3)nr 81038960016 bwta (4)nr 81038918680 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(79.120 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(79.120 mts) on approx basis , advice note no.25-03385 dt-20.03.26 and 25-03387 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot