Latest steam pipeline Tenders | Government steam pipeline Tenders

State Government

CTN :41780696

18 Sep, 2025 9.70 Lacs

Agartala - Tripura

Tender For running maintenance of different jjm/arws/rws retrofitting schemes under the jurisdiction of dws sub-division, hezamara, west tripura/sh: maintenance and extension of upvc pipe in/c re-sinking of dufunct sbdtw scheme & installation of pump motor set, repair of upvc pipe line and other allied works of sbdtw schemes during the year 2025-26. (group no. ii)

State Government

CTN :41365007

15 Sep, 2025 NA

Phaltan - Maharashtra

Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te

Central Government/Public Sector

CTN :41743368

29 Sep, 2025 NA

Koraput - Odisha

Tender For supply of plumbing tiling electrical and boundary repair works d d - bricks , cement , construction sand , tin sheet , interior door 1 , interior door 2 , main door , interior door 3 , interior door 4 , door frame 1 , door frame 2 , main door frame , door frame 3 , door frame 4 , door latches , door hinges , hinge screws , door installation , wall tiles , tile cleaner , floor tiles , tile grout , tile dismantling service , tile installation service , tile grouting service , fan capacitors , threading screws 1 inch , electrical casing boxes , plastic cable grips 38mm , pvc insulation tape , pvc nail clamps 6mm , electric wire 1.0sqmm , angle holders , led tube lights 20w , pvc casing 20mm , 4-way switch boards , 6a switches , 6a sockets , cable 1.5mm , cable 0.75mm , pvc tape , 40mm wall plugs , trunking 30x15mm , plastic c clips 4mm , nail clips 20mm , surface boards 4-way , 1-way switch 6a , 3-pin socket 6a , flush metal box , electrical wiring service , switch n socket installation , light fitting service , ladies urinal , odisha pan 23 inch , s-type commode , bib cock 2-way , short body tap , long body tap , cpvc push fitting , angle cock , shower head , toilet seat cover , wash basin , waste coupling , waste pipe , health faucet , pillar cock , thread seal tape , cpvc nail clamps 3 by 4 inch , connection pipe , 1.5 inch patch fitting , 1.5 inch wall plate , basin nut bolt , cpvc reducer 3 by 4 inchx1 by 2 inch mta , cpvc reducer 3 by 4 inchx1 by 2 inch fta , cpvc plain elbow 3 by 4 inch , cpvc plain tee 3 by 4 inch , cpvc brass elbow 3 by 4 inch , cpvc brass tee 3 by 4 inch , cpvc socket 3 by 4 inch , cpvc bush 3 by 4 inch , cpvc solvent 100ml , upvc plain elbow 3 by 4 inch , upvc socket 3 by 4 inch , ball cock 25mm , upvc solvent 100ml , upvc pipe 1.5 inch , upvc brass fta 1.5 inch , upvc brass mta 1.5 inch , upvc ball valve 1.5 inch , upvc union 1.5 inch , pvc door tee 110mm , pvc air call 110mm , pvc plain tee 110mm , pvc 45 degree bend 110mm , pvc door tee 75mm , pvc plain elbow 75mm , pvc door elbow 75mm , pvc 45 degree bend 75mm , pvc plain tee 75mm , pvc pipe 50mm , pvc 45 degree bend 50mm , pvc elbow 50mm , pvc tee 50mm , pvc floor trap 75mm , pvc pipe 75mm , pvc air call 75mm , upvc plain elbow 1 inch , upvc brass mta 1 inch , upvc brass fta 1 inch , tank connector 1 inch , cpvc bush 1 inch , cpvc elbow 1 inch , cpvc plain fta 1 inch , cpvc pipe 1 inch , 2 inch pvc mta , 2x1 bush , 1x3 gi rs , gents urinal , 63x50mm rs , 3 by 4 cpvc pipe , 1 inch cpvc , 4 inch ss jubbli clamp , white cement , 4 inch pvc pipe , 50mm pvc pipe , syntax box , mirror , 1.2 inch ss nails , 1.5 inch upvc pipe , plug , 1.5 inch cpvc fta , 1.5 inch pvc elbow , 1.2 inchx1 bush , 1 inch pvc fta , west pipe , 1x3 by 4 upvc bush , 1 by 2 inch gi short piece 6 inch , 1 by 2 inch gi socket , 1 by 2 inch gi elbow , thread seal , 3 by 4 cpvc pipe , 3 by 4 plain elbow , 3 by 4 plain tee , 3 by 4 brass tee , 3 by 4 brass elbow , 3 by 4 conceal , 3 by 4 nail clamp , c pvc solvent 100 ml , 3 by 4 ball valve , 3 by 4 cpvc brush , 3 by 4 upvc socket , 12 by 12 nepin , 75mm pvc pipe , 75mm pvc tee , 75mm elbow , pvc solvent 200 ml , plumbing dismantling , water supply line installation , drainage line installation , sanitaryware installation , tap and faucet installation , general labor charges , site cleaning and debris removal //bid details 2 / 124

CTN :41705708

18 Sep, 2025 48.44 Lacs

Tiruvallur - Tamil Nadu

Tender For providing of custom bid for services - cpclv25395 upgradation of existing insulation to aerogel based hydrophobic insulation for steam pipelines in culverts at refinery - 1 & 2 (phase- 1) at cpcl, manali

Central Government/Public Sector

CTN :41666837

20 Sep, 2025 28.00 Lacs

Trivandrum - Kerala

Tender For maint/repair of ext w/s sys, gi/upvc pipe lines, cleaning of shallow/bore wells, repair to pump sets, motor etc, and miscellaneous works at calicut, maint/repair to pump sets, motor, cable, control system of pump set at kannur under ge (army) tvm

CTN :41626447

12 Sep, 2025 1.79 Lacs

Kajora - West Bengal

Tender For providing and fixing of thermal insulation on 4inch main and subsidiary steam pipeline covering the distance of 141 at no. 6 pit of khas kajora colliery

Steam Pipeline Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector