Get complete information related to latest Steam Pipeline Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steam Pipeline Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steam Pipeline Tenders.
Tender For supplying and fixing of electrical fitments for newly constructed toilet of d coy barrack and new jamin toilet at stc bsf of north bengal electrical installation - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. group b, rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. group b, wiring for circuit/ submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire., wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire., supplying and fixing 3 pin 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required. 3 pin 5 amp, supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. size : 180mm x 100mm x 60mm deep., supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator). 8 way , double door., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole and neutralsingle pole and neutral., earthing with g.i. earth pipe of following size including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.5 metre long, 40 mm dia ., supplying and laying following size g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with gi thimble etc. as required.6 swg., supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted /welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. standard make., add applicable rate of gst @18% in place of 12% (0.0633mf) on dsr item. s no.(1 to 12), add 1% labour cess on s no. (1 to 12) + s no.13, modified estimate cost after using correction factor on account of gst @ 0.973 on dsr items s no. (1 to 12) + s no.13 + s no.14, supplying and fixing 3 mm thick phenolic laminated sheet cover in front of ms switch box including making hole and al. alloy/ cadmium plated iron screws, 20 mm, washers etc. as required.hylem/formica/anchor/as approved by engg incharge., supplying and fixing of 6 watt surface type trim cosmo panel square shape led light suitable for 240 volt, single phase, 50
Tender For construction of ms intake chamber, laying, jointing and testing of hdpe pipe 75mm dia in gravity main, construction of zinc aluminium steel storage tank 30 kl capacity, laying, jointing and testing of gi pipe 150 mm dia from tank to hydrant and protection work behind tank.
Tender For empanelment of annual ratecontract for providing and supplying various material for drainage department at gandhidhammunicipal corporation area, gandhidham. (second attempt) - sewage cleaning roads, bamboo pole 18 feet, bamboo pole 24 feet, r.c.c np-3 pipe 9" dia, r.c.c np-3 pipe 12" dia, r.c.c np-3 pipe 18" dia, r.c.c np-3 pipe 24" dia, construction of frc manhole covers r.c.c.m-150 grade, 5cm thick set in m.s.flat of size 50 x 3mm and a neat cement coating providing rainforcement in covers with 8mm dia tor steel bar 12cm c/c both ways and pair of lifting handles of 8mm dia m.s.bar in covers. every cover will must be croft with the help of vibrating cum compacting system. test report of water, steel, cement concrete mix disign of m-150 grade.size 60 cm x 120 cm, sfrc square cover 760 l x 760 b x 70 w mm, md 10 type, 10.00 mt load capacity weight of cover : 100 kg approx10mm steel tor bar 19 cm c/c duly welded70 x 1.25 mm ms flat all-round two piece of lifting hook of 10 mm diasteel fabrication weight - minimum 2.80 kg760 x 760 square cover, sfrc manhole circular cover815 mm dia od x 70 mm thick cover, set weight 321 kg approx.md 10 type, 10.00 mt load capacity weight of cover : 90 kg approx10mm steel tor bar 16 cm c/c duly welded70 x 1.25 mm ms flat all-round two piece of lifting hook of 10 mm diasteel fabrication weight - minimum 3.45 kg815 mm dia circular cover, sfrc square cover 900 l x 900 b x 50 w mm, md 5 type, 5.00 mt load capacity weight of cover : 100 kg approx4 + 4 total 8 nos 10mm steel tor bar 18 cm c/c duly welded50 x 1.25 mm ms flat all-round two piece of lifting hook of 10 mm diasteel fabrication weight - minimum 4.55 kg900 x 900 square cover, c.i man hole frame and cover 1.5 x 2, c.i man hole frame and cover 2 x 2, c.i man hole frame and cover 2 x 1.5, c.i man hole frame and cover 2 x 2.5, c.i man hole frame and cover 3 x 3, new chamber construction work (square chamber), 0m to 1m (with cover), 1m to 2m (with cover), 2m to 3m (with cover), chamber repairing work (square chamber), 0m to 1m (with cover), 1m to 2m (with cover), 2m to 3m (with cover), new chamber construction work (round chamber), 0m to 1m (with cover), 1m to 2m (with cover), 2m to 3m (with cover), chamber repairing work (round chamber), 0m to 1m (with cover), 1m to 2m (with cover), 2m to 3m (with cover), new r.c.c chamber construction work, 0m to 1m (with cover), 1m to 2m (with cover), 2m to 3m (with cover), r.c.c chamber repairing work, 0m to 1m (with cover), 1m to 2m (with cover), 2m to 3m (with cover), 300 mm dia np-3 pipe providing, lowering and laying (work material with labour), 225 mm dia np-3 pipe providing, lowering and laying (work material with labour), storm water drain cover size:2x4 and 3x4 and 2x5 (in foot), storm water drain cover size:3.5x3.5 (in foot), drainge round cover with frem (size: 4x4)
Tender For bid to ras supply of electrical items c c - ml for flame proof point wiring with two single core frls h pvc insulated pvc unsheathed multi stranded copper conductor cable of size 1 point 5 sqmm 1100v , supply install testing of flame proof metallic body exhaust fan single phase 230v 50hz 300mm 1440 rpm with louvers and shutter including civil work , ml switch flame proof rotory type with termination box in lm 6 16 a single phase 250v complete all as specified and directed by engr in charge , supply and fixing db spn 4 way db including all fixing accessories complete all as specified and directed by engr in charge , supply and fixing mcb sp 6 to 32 amps 240v rupturing capacity 10 ka c series complete all as specified , supply and fixing mcb db 20 amps 240v breking capacity 10 ka complete all as specified , ml for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick surrounded with charcoal and salt buried directly in ground , ml for submain wiring with 2 single core pvc insulated unsheathed multi stranded copper conductor frls wire 4 sqmm 1100v grade incl one 4 sq mm pvc insulated , supply lay jointing testing xlpe insulated lt under ground cable 1100v grade heavy duty armoured with multi stranded aluminium conductor laid in trenches ducts , excavation in trenches n exc 1 point 5m wide and n exc 1 point 5m in depth for foundation etc or for shafts wells cesspits manholes pier holes laying of cables etc , ml for tibba sand cushioning to under ground cable in trenches existing cable trenches ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying , ml for 40 to 50 mm thick rough dressed jodhpur type stone slab 25 to 35 cm in width of 80 cm long laid dry abutting each other for protection to under ground cable , ml for removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1 point 5m above the ) /bid number : gem/2025/b/6562017 * /dated: 20-08-2025 & & / bid document 1 / 20 & & ' ' /item category starting point complete , ml for returning, filling in including spreading leveling watering and well ramming in layers not exc 25 cm complete all as specified and as directed , ml for gi tubes in replacement of 32mm bore size light grade galvanised including fittings with clamp of 25x3 flat iron welded to pipe fixed to wall , supply install testing or commissioning of inverter tech split wall mounted ac indoor outdoor unit with cordless remote control cap 1 point 5 tr make lg blue star hitachi voltas lyod , supply fixing heavy duty copper pipe 12mm 1 oblique 2 inch dia bore thickness 0 point 70 mm complete incl brazing welding nuts bolts and screws , supply fixing heavy duty copper pipe 6mm 1 oblique 4 inch dia bore thickness 0 point 70 mm complete inclu brazing welding nuts bolts and screws , supply and fixing new nityrile rubber insulation for copper pipes suitable for split ac of capacity from 1 point 5 to 2 tr complete all as directed by engg in charge , supply fixing in replacement wall mounted digital voltage stabilizer for automatic operation single phase naturally air cooled indoor type designed for input variation between 150 to 285v , sf sheet metal enclosure 2 pin earth plug socket complete with one single pole mcb of 20 amp capacity complete all as specified and directed by engr in charge , sf wiring from indoor to outdoor unit size 2 point 50sqmm pvc insulated multistranded frls 4 core round cable incl fixing of thimbles for split type air conditioner 1 point 5 to 2 tr , m l for surface sub main wiring with two runs of 4sqmm single core pvc insulated unsheathed multistranded with copper conductor cable 1100v frls h grade isi marked , supply fixing new pvc drain pipe 15 mm dia with coupler joint for split or window ac complete all as specified as directed , supply fixing in replacement outdoor unit odu stand for 1 point 5 or 2 tr type split ac complete all as specified as directed
Tender For bid to ras tender for supply of dismantling of unserviceable air circuit breaker from lt panel by disconnecting all incoming and outgoing electrical connection and supply and fixing of air circuit breaker 4 pole 415 volts ac supply 800 amps 50 ka thermal magnetic release fixed type connecting all incoming and outgoing connection complete all as specified and directed make l and t cat part no uw108nff01800 legrand schneider 01 each , dismantling of unserviceable mccb by disconnecting all incoming and outgoing electrical connection and supply and fixing of mccb 4 pole 415 volts ac supply 320 amps 50 ka breaking capacity 50 hz with thermal magnetic release with spreader link on both side connecting all incoming and outgoing connection complete all as specified and directed make l and t cat part no du400n cm98404ooqo legrand schneider 01 each , supply laying and testing cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 240 sq mm 3 point 5 core complete all as specified and directed make gloster polycab wires pvt ltd grandlay plaza 80 rm , excavation in trenches not exceding 1 point 5 m wide and not exceding 1 point 5 m in depth and getting out soft loose soil complete all as specified and as directed for laying of under ground cable foundation of pole and stay etc complete all as specified and as directed 16 point 74 cum , returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick in soft loose soil complete all as specified and directed 9 point 66 cum , removing excavated material not exceding 50 m and depositing where directed at a level not exceding 1 point 5 m above the starting point all as directed 7 point 08 cum , material and labour for providing sand cushioning with dry fine sand including filling spreading levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed 5 point 02 cum , supplying and laying burnt clay bricks sub class b old size laid in trenches over cable protection complete all as specified and directed 0 point 15 per 1000 nos , laying only serviceable bricks obtained from the items specified here in before that is during taking out of under ground cable laid flat dry in trenches with width of the bricks laid to the axis of cable for protection of cable complete all as specified and as directed 350 each , m and l for boring of holes horizontally under road pavement hard standing footpath blast wall without damaging the surface of road minimum 1 point 0 meter below the road surface with the help of gi tubing not exceding100mm bore for passing of underground cable complete all as specified and directed note gi pipe laid will be measured and paid separately under the respective items of schedule 10 rm , m and l for 80mm bore gi tubing light grade with all fittings laid across road or across pcc drains along electric pole or floor wall for cable protection complete all as specified and directed 10 rm
Tender For bid to ras supply of steel reinforcement , providing and laying in position cement concrete , excavation by mechanical , boring drilling bore well , unplasticised pvc medium well casing pipe , supplying filling spreading and levelling gravels , cement plaster on the rough side of single , reinforced cement concrete in walls , reinforced cement concrete in beams , centering and shuttering including strutting propping etc and removal of form for 2 , centering and shuttering including strutting propping etc and removal of form for 3 , masonry road gully chambers , supplying filling spreading and levelling stone boulders , providing and fixing bail plug bottom plug , bending and fixing iron rungs in lined slopes , steel welded in built up sections framed , finishing walls premium acrylic emulsion paint , providing and laying of conglomerate floor , common burnt clay non modular of class designation , excavation of foundation , painting on wall with decorative painting slogan , fabrication and manufacturing of solid precast concrete element , providing hoisting and fixing up to floor four level precast reinforced cement concrete in small lintels , providing and supplying of class sn 8 structured wall polyethylene piping system , lowering laying and jointing of class sn 8 structured wall , miscellanceous items , providing and fixing factory made precast perforated drain covers , supplying assembling lowering and fixing in vertical position in bore well , gravel packing in tube well construction , providing and fixing suitable size threaded mild steel cap or spot welded plate , providing and fixing ms clamp of required dia to the top of casing housing pipe
Tender For supply and fixing of new 5000lit sintex tank with 10m height of tower errection at ward no 25 e b office street in karamadai municipality - earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rock inclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation, plain cement concrete in mix 1:4:8 (one cement , four sand and eight aggregate) using 40 mm bss hbg metal including cost and conveyence of all meterials to work site and labour charges for mixing, laying, curing etc complete as per the standard specification., cement concrete in 1:2:4 [one cement and two sand and aggregate using 20mm size iss grade machine crushed metal including the cost of mixing laying curing etc., complete complying with standard specification., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and round bars etc. conforming to is specification including primer coating as per design given by the departmental officers etc, complete as per standard specification, painting two coats with ready mixed enamel paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors., supply and fixing of 5000 lit hdpe tank isi make with all accessories such as tank nipple, washer etc,including cost and conveyance of all materials to site etc, complete as per standard specifications., supply and fixing of g.i. and pvc pipes and specials and electrical items as per i.s. specification including packing, loading, unloading, freight, stacking and transist insurance etc.complete as per standard specification. 2" g.i pipe, 2" pvc pipe, 2" g.i elbow, 2" g.i coupler, 2" pvc gate valve, pvc adhesive 100 gm bottle, shellac 100 gm, flange, laying and jointing pvc & gi pipe and specials including conveyance of all charges etc complete .
Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steampipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te
Tender For provision of lt cable, lt panel and connected items at trg area of 01 assam under ge e/m lucknow - excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed by the engineer-in-charge., returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and as directed., removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed., material and labour for dry river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading, levelling & punning complete as specified and directed .note :- punned thickness (18 cm) shall only be considered for payment., m&l for laying of fly ash brick designation 100 kg / sqcm, using old size bricks confirming to is 12894, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed by engr-in-charge., deployment of tools & manpower for boring /drilling (horizontly) manually / mechanically under existing road max 10 m in width) suitable for passing pipe of any descreption of dia 40 to 100 mm complete all as specified and directed by engineer in charge, supply, laying jointing and testing lt ug cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured is 7098 marked, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in gi pipes etc. with and includings ms clamps, nuts, bolts, washers complete all as specified and directed. note- excation, earth works,and sand cushioning, protection bricks and pipe shall be measured and paid seprately under given items., all as per item no 07 above but lt under ground cable of size 95 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 70 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 50 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 16 sqmm 4 core, s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm xlpe armoured aluminium conductor ., s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm xlpe armoured aluminium conductor, m&l for 80 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of ug cable complete all as specified and directed by engr-in-charge. , m&l for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from gl, connected with galvanised iron strip 32 x 6 mm, all as shown in plate no-3, of ssr, connected to the earthing test point, concrete pit in pcc 1:3:6 type c-2with rcc precast pit cover slab 400 mm x 400 mm x 50 mm with handle for lifting made out of 8 mm dia ms rod, funnel, wiremesh, 50 mm dia light grade gi tubing for protection of gi strip 32 x 6 mm, charcoal and salt in alternate 150 mm thick layers around gi earth plate, including necessary returning filling in & removal all as specified or indicated in ssr part-i, including testing to achieve earth resistance value as per is specification on completion, supply, installing, testing and commissioning factory made, cpri approved, confirming to is-5039, overall powder coated, lt p