Latest tamping tool Tenders | Government tamping tool Tenders

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45715119

28 Jul, 2026 NA

Multi City - Multi State

Tender For supply of set of tungsten carbide tamping tools (tctt) for unimat -4s as per rdso technical specification no: tm/hm/6/320 ( rev-3). one set consists of 1) big tamping tool as per plasser part n o.cu30.6820be and rdso drawing no. rdso/tm/01a/16=08 no's, 2) small tamping tool as per plass er part no. cu30.6220be and rdso drawing no. rdso/tm/01b/16=08 no's. total no of tools - 16no's ]make:-plasser or equivalent [ warranty period: 24 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45697924

17 Jul, 2026 NA

Dakshina Kannada - Karnataka

Tender For supply of stub shaft , ss stub shaft drive end , cs stuffing box with rubber strip , bronze lantern ring for disc filtr , hardened shaft sleeve-disc filter , wear plate , bridge plates , valve body drive end , valve body rear end

corporations/Associations/Others

CTN :45696580

08 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, delivery, installation of one number dismantling joint along with replacement of worn out spare parts, testing and commissioning of 750 mm dia. pdv and other allied works of pump unit no. 5 at cwps-ii, grww. - supply, delivery, installation, testing andcommissioning of 700 mm dia ms dismantling joints., dismantling counter weight, lever, arm, hydraulic unit etc. and all other components of the hydraulic system one by one of 750 mm dia. pump discharge valve parts by parts sequentially and cautiously as per direction of the engineer-in-charge (eic) at grww., dismantling the 750 mm dia. pdv from the existing pipe-bay, installatio/fitting-fixing of barrel-piece/flange and lifting & keeping the same on the working platform sequentially and cautiously as per diretion of the eic at grww., to and fro transportation charges of 750 mm dia. pdv from grww to workshop including loading and unloading.., dismantling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of the eic at grww/workshop., supply, delivery and fitting-fixing of drive shaft of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of valve seal of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (ss 410) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (epdm rubber) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of stub bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of drive bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of clamping ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of end cover of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of o ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft pin of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of allen screw of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply,delivery and fitting-fixing of gland plate of 750 mm dia. pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft key of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., repairing the damaged portion of the hole for holding the bearing of 750 mm dia. pdv by deposting metal, boring, machining, grinding etc., all complete, as per original shape and size and direction of eic at grww.., re-aasembling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of eic at grww., performing of necessary hydro-testing of the disc and body of 750 mm dia. pdv as per direction of eic at grww., lowering from the working-bay, installation, fitting-fixing of 750 mm dia. pdv in the existing pipe-bay removing the existing barrel-piece/flanges as per direction of the eic at grww., re-assembling and re-fitting all the components of the hydraulic system like counter weight, lever, arm, hydraulic unit etc. with the existing 750 mm dia. pdv installed in the pipe-bay parts by parts sequentially and cautiously as per direction of the eic at grww., test run, operation and commissioning of the entire system of 750 mm dia. pdv as per direction of the eic at grww.

Central Government/Public Sector

CTN :45478233

02 Jul, 2026 NA

Raigarh - Chhattisgarh

Tender For corrigendum : supply of lara cast basalt pipes - sbf straight pipe both side flange, pipe id 203 mm, length 6000 mm , sof straight pipe one side flange, pipe id 203 mm, length 6000 mm , spl straight pipe special with stub connection, pipe id 203 mm, length 1800 mm , sff straight pipe with both side flange with different standard, pipe id 203 mm, length 6000 mm , sbf straight pipe both side flange, pipe id 228 mm, length 6000 mm , sof straight pipe one side flange, pipe id 228 mm, length 6000 mm , spl straight pipe special with stub connection, pipe id 228 mm, length 6000 mm , sff straight pipe with both side flange with different standard, pipe id 228 mm, length 6000 mm , sop special one end flange with stub connection, pipe id 228 mm, length 6000 mm , sbf straight pipe both side flange, pipe id 386 mm, length 6000 mm , sof straight pipe one side flange, pipe id 386 mm, length 6000 mm , sff straight pipe with both side flange with different standard, pipe id 386 mm, length 6000 mm , sos straight pipe one end ansi standard flange, pipe id 386 mm, length 6000 mm , spare sbf straight pipe both side flange, pipe id 203 mm, length 6000 mm , spare sof straight pipe one side flange, pipe id 203 mm, length 6000 mm , spare spl straight pipe special with stub connection, pipe id 203 mm, length 1800 mm , spare sff straight pipe with both side flange with different standard, pipe id 203 mm, length 6000 mm , spare sbf straight pipe both side flange, pipe id 228 mm, length 6000 mm , spare sof straight pipe one side flange, pipe id 228 mm, length 6000 mm , spare spl special with stub connection, pipe id 228 mm, length 6000 mm , spare sff straight pipe with both side flange with different standard, pipe id 228 mm, length 6000 mm , spare sop special one end flange with stub connection, pipe id 228 mm, length 6000 mm , spare sbf straight pipe both side flange, pipe id 386 mm, length 6000 mm , spare sof straight pipe one side flange, pipe id 386 mm, length 6000 mm , spare sff straight pipe with both side flange with different standard, pipe id 386 mm, length 6000 mm , spare sos straight pipe one end ansi standard flange, pipe id 386 mm, length 6000 mm

corporations/Associations/Others

CTN :45666714

08 Jul, 2026 15.65 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of - head end shaft for ssc 170 mm (as per sample)#material: 817m40/en-24 return trough idler shaft for ssc 100 mm (as per sample)#material: 817m40/en-24 snub/idler shaft for ssc 90 mm (as per sample)#material: 817 m40/en-24 roller for the idler shaft of ssc id: 90 mm, (as per sample)#material: 080m40/en-8 roller for the tail end shaft of ssc, id: 100 mm (as per sample)#material: 080m40/en-8 locking collar with grub screw #size: 140x100x25 mm, hole dia: 6.0 mm (as per sample)#material: mild steel locking collar with grub screw #size: 150x110x20 mm, hole dia: 6.0 mm (as per sample) #material: mild steel complete guide wheel assembly #each set contains#1. roller material: 080m40/en-8 #2. bush, material: gun metal lg3-c (grade 1) #3. thrust washer, material: red brass (alloy 230) #4. stub shaft, material: ss 304 #5. hthh nut m48 & washer, material: ms gr 10.9 #6 bearing housing, material: ms #7. gasket for stub shaft mat: neoprene rubber #8. gasket for bearing housing mat: neoprene rubber bell housing for hydraulic pump of ssc of model no. a10vso 45 dfr/31r-vpa12n00 to suit electric motor aeul180m04, #material: pressure diecast aluminum alloy (as per sample)

Central Government/Public Sector

CTN :45648241

16 Jul, 2026 NA

Jaduguda - Jharkhand

Tender For hose coupling (stub end) - ms, size: 1" (25 mm)

Central Government/Public Sector

CTN :45664560

16 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of wire claw 8 pronged to c.rly.drg.no. gm[w] bb-r-185-90 alt.3 material hard drawn black wire to is:280/1982 or latest. nos. [nature of item - non safety]. brief description - these are made of 8 to 10 steel wires of about 4 to 6 mm in dia with a bent finish at the free end, held together at the fixed end. it weighs about 1 to 1.5 kg. it is used to open/ close the track by pulling the ballast inside or outside the rail foot, to fill the ballast or earth in pan mortar. it is also a dressing tool, used in filling the indentations made by tamping tool during machine packing, and in dressing of shoulder ballast and cess.this is handled by one trackman individually. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45652663

13 Jul, 2026 NA

Sambalpur - Odisha

Tender For corrigendum : supply of set of tamping tools for csm/duo (tctt-new) as per plasser part no. 1) .cu30.10840 fr i and rdso drawing no. rdso/tm/15a/16=08 no's, 2) cu30.10840 fr ii and rdso drawing no.rdso/tm/15b/16=08 no's. 3) cu30.10840 fr iii and rdso drawing no. rdso/tm/15c/16=08 no's, 4) cu30.10840 fr iv and rdso drawing no. rdso/tm/15d/16=08 no's total no. of tools: 32 and rdso specification no.tm/hm/6/320(rev-3, july2019), make: plasser ind or its equivalent. [ warranty period: 24 months after the date of delivery ] ]

CTN :45645945

25 Jun, 2026 NA

Kolkata - West Bengal

Tender For procurement and provisioning supply of hull outfitting items for multi-purpose vessel project, grse yard nos. 3059 - 3062 - base plate for stanchion type-i & ii, 80x40x3.2 rec hollow sctn astm-a-501gr.b, 80x40x3.2 rec hollow sctn astm-a-501grb, "50x50x6 mm ms angle 15:2062, gr b42.2x4.85 smless st pipe astm-a-106-b65nb carbon steel sleeve219.100x8.18tk smls st pipe astm a106g-bseamless pipe 32nbplug for bpwi type drain plugot manhole cover co600x400 (do type)22x22 square bar to gr. e2508050x50x6 mm ms angle is:2062, grb", flanges ms 150nb & stub end, gaskets, 50 nb striking plate m.s. (galv), bonb cs doubler penetration piece pn 10, 150nb cs doubler penetration piece pn 10, 250nbx150nb, steel reducer, 200 nb steel elbow, 90° (sr), 32nb carbon steel slip on flange pn 10, 200nb carbon steel sleeve, 32nb carbon steel sleeve, 200nb carbon steel sleeve, 32 nb gasket/'o'ring neoprene ruber, 15 nb sch. 40 galv seamless steel pipe, 15nb carbon steel sleeve, seamless pipe 168.3mm od x 8mm(150nb), seamless pipe ss 304, 80 nb, dn150 (160) pe100 pipe pn10, 150 nb steel elbow,90° (lr), 80 nb steel elbow 90° (lr) sch 80, 150nb ss316l slip on flange pn 06, bonb carbon steel slip on flange pn 10, loose pipe adapter flange brass wld ring, backing flange 32 o/d-spare-ro plant, dn150 (160) coupler pe100 pipe pn10, 250nex150nb, steel reducer, bonb cs doubler penetration piece pn 10, 50 nb striking plate m.s. (galv), seamless pipe ss 304, 80 nb, 42.2x4.85 smless st pipe astm-a-106-b, 00 nb steel elbow 90° (lr) sch 80, bonb carbon steel slip on flange pn 10, 25mm nb ms slip on flange (com. code-713, dn65 cs slip on flange pn 10 en1092-1, bonb carbon steel sleeve, bonb carbon steel sleeve, obs 65nb gasket, obs 25nb gm pr. reducing v/v flng gasket, 65x65x8 mm ms angle is:2062, gr 'a", *50x50x6 mm ms angle 15:2062, gr, 22x22 square bar to gr. e25080, plug for bpwi type drain plug, 22x22 square bar to gr. e25000, 19mm dia round bar to gr. e25080, flush lashing pots cargo lashing swl-25t, "50x50x6 mm ms angle is:2062, gr b42.2x4.85 smless st pipe astm-a-106-865nb carbon steel sleeveseamless pipe 32nb32nb carbon steel slip on flange pn 1032nb carbon steel sleeve32 nb gasket/o'ring neoprene ruber15 nb sch. 40 galv seamless steel pipe15 nb steel elbow, 90° (lr)15nb carbon steel sleeveseamless pipe 168.3mm od x 8mm(150nb)seamless pipe ss 304, 80 nbdn150 (160) pe100 pipe pn10150 nb forged socket end 90 deg elbow150 nb steel elbow,90° (lr)80 nb steel elbow 90° (lr) sch 80150nb ss316l slip on flange pn 0680nb carbon steel slip on flange pn 10loose pipe adapter flange brass wld ringbacking flange 32 o/d-spare-ro plantdn150 (160) coupler pe100 pipe pn10150 nb pipe support clip(com.code-793264150 nb pipe support clip(com.code-79326432 nb gasket/'o' ring neoprene ruber15 nb sch. 40 galv seamless steel pipe15 nb steel elbow,90 (lr)", 15nb carbon steel sleeve, seamless pipe 168.3mm od x 8mm(150nb), seamless pipe ss 304, 80 nb, dn150 (160) pe100 pipe pn10, 150 nb forged socket end 90 deg elbow, 150 nb steel elbow 90° (lr), 80 nb steel elbow 90° (lr) sch 80, 150nb ss316l slip on flange pn 06, bonb carbon steel slip on flange pn 10, loose pipe adapter flange brass wld ring, backing flange 32 o/d-spare-ro plant, dn150 (160) coupler pe100 pipe pn10, 250nex150nb, steel reducer, 150nb cs doubler penetration piece pn 10, bonb cs doubler penetration piece pn 10, 50 nb striking plate m.s. (galv), flanges ms 150nb & stub end, gaskets, 125 nb seamless black pipe, 7300x5.2thk smls st pipe astm-a106g-b, 7300x5.2thk smls st pipe astm-a106g-b, 250nex150nb, steel reducer, 65 nb steel elbow 90° (lr), 65 nb steel elbow 90° (lr), 125 mb steel elbow, 90° (sr), 125 mm nb ms slip on flange (com. code, dn65 cs slip on flange pn 10 en1092-1, 125nb carbon steel sleeve, 65nb carbon steel sleeve, 50 nb striking plate m.s. (galv), obs 65nb gasket, 60.300x3.9thk smls st pipe astm-a106g-b, 250nbx150nb, steel reducer, 50 nb steel elbow 90° (lr) sch 80, sonb carbon steel slip on flange

Tamping Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors