Latest tamping tool Tenders | Government tamping tool Tenders

Central Government/Public Sector

CTN :45733150

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45715119

28 Jul, 2026 NA

Multi City - Multi State

Tender For supply of set of tungsten carbide tamping tools (tctt) for unimat -4s as per rdso technical specification no: tm/hm/6/320 ( rev-3). one set consists of 1) big tamping tool as per plasser part n o.cu30.6820be and rdso drawing no. rdso/tm/01a/16=08 no's, 2) small tamping tool as per plass er part no. cu30.6220be and rdso drawing no. rdso/tm/01b/16=08 no's. total no of tools - 16no's ]make:-plasser or equivalent [ warranty period: 24 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702009

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

Central Government/Public Sector

CTN :45664560

16 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of wire claw 8 pronged to c.rly.drg.no. gm[w] bb-r-185-90 alt.3 material hard drawn black wire to is:280/1982 or latest. nos. [nature of item - non safety]. brief description - these are made of 8 to 10 steel wires of about 4 to 6 mm in dia with a bent finish at the free end, held together at the fixed end. it weighs about 1 to 1.5 kg. it is used to open/ close the track by pulling the ballast inside or outside the rail foot, to fill the ballast or earth in pan mortar. it is also a dressing tool, used in filling the indentations made by tamping tool during machine packing, and in dressing of shoulder ballast and cess.this is handled by one trackman individually. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45652663

13 Jul, 2026 NA

Sambalpur - Odisha

Tender For corrigendum : supply of set of tamping tools for csm/duo (tctt-new) as per plasser part no. 1) .cu30.10840 fr i and rdso drawing no. rdso/tm/15a/16=08 no's, 2) cu30.10840 fr ii and rdso drawing no.rdso/tm/15b/16=08 no's. 3) cu30.10840 fr iii and rdso drawing no. rdso/tm/15c/16=08 no's, 4) cu30.10840 fr iv and rdso drawing no. rdso/tm/15d/16=08 no's total no. of tools: 32 and rdso specification no.tm/hm/6/320(rev-3, july2019), make: plasser ind or its equivalent. [ warranty period: 24 months after the date of delivery ] ]

CTN :45647222

30 Jun, 2026 7.00 Lacs

Sonipat - Haryana

Tender For purchase of tube cleaning equipments of ffes evaporators and pan etc. - purchase of tube cleaning equipment s of ffe s evaporators and pan etc., flexible shaft 16 mtr for ffe(make s.j industries, manacles, scaleaway, power flex)2965, foundry brush(make s.j industries, manacles, scaleaway, power flex)1980, hand piece flex shaft19mm (make s.j industries, manacles, scaleaway, power flex)5205, shaft flexible 7.5 mtr long (length of one no. shaft 7.5 mtr) (make s.j industries, manacles, scaleaway, power flex)1890, sphere beeds 42 mm (make s.j industries, manacles, scaleaway, power flex)1896, sphere pin 42 mm(make s.j industries, manacles, scaleaway, power flex)1897, spring 42 mm(make s.j industries, manacles, scaleaway, power flex)1898, t.h.cutter35.6mm for ffe(make s.j industries, manacles, scaleaway, power flex)5206, tool head cutter 42mm(make s.j industries, manacles, scaleaway, power flex)1892, tool head cutter 98mm (make s.j industries, manacles, scaleaway, power flex)1895, turck head brush 35.6mm for ffe(make s.j industrier, manacles, scaleaway, po wer flex)5209, turk head brush 42/43mm (make s.j industries, manacles, scaleaway, power flex)1971, turk head brush 98/102mm (make s.j industries, manacles, scaleaway, power flex)1974, evaporator tube expender suitable for id 42.6 mm(manacles, scaleaway, power flex make)1463, ffe tube expender suitable for id 35.6 mm(make s.j industries, manacles, scaleaway, power flex)1525

Central Government/Public Sector

CTN :45652862

23 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of tungsten carbide tamping tool confirming to plasser part no.- cu30.10840-frv. rdso specification: tm/hm/6/320 (rev-3). rdso drawing: rdso/tm/15e/16. acceptable make/brand:- plasser or equivalent.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45643504

27 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of tungsten carbide tamping tool (small) for unimat part no.- w-37-1320-52-ra. rdso specification: tm/hm/6/320 (rev-3). rdso drawing: rdso/tm/01c/16. acceptable make/ brand :-plasser or equivalent.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45644376

22 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of carbide tamping tool (big) for mpt part no.cu30.6840-fr-i. rdso specification: tm/hm/6/320 (rev-3) rdso drawing: rdso/ tm/01a/16. acceptable make/brand:- plasser or equivalent. ]

Tamping Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors