Latest tapered washer Tenders | Government tapered washer Tenders

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

CTN :45478487

18 Jun, 2026 NA

Dimapur - Nagaland

Tender For supply of gi tile roof sheet 0.5mm - 0.6mm thickness width 3.5 ft and length 10 ft green color , l hook with nut and bitumen washer size 8mm dia and 3" x6" , colored ridge sheet 0.70m wide

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

CTN :45161541

08 Jun, 2026 50.00 Lacs

Palakkad - Kerala

Tender For corrigendum : supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, stone aggregate(single size): 10 mm nominal size, solid blocks of size 10x20x15cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, red oxide zinc chromate primer, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, fine sand (zone iv), galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, mild steel hot finished welded type, welding by electric plant, average rate of mild steel round bars for reinforcements, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick

CTN :45416190

11 Jun, 2026 30.00 Lacs

Palakkad - Kerala

Tender For ananganadi grama panchayath ,vendor selection for supply of various mterials for mgnregs - quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, fine sand (zone iv), coarse sand (zone iii), gravel 5mm to 10mm, stone for masonry work, portland cement, m.s. tube 40 mm dia, mild steel tubes hot finished welded type, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel sheets with bolts and nuts to rest on pintels, iron pintels including weldded pin, mild steel sheets for tanks, mild steel hooks, mild steel plate, mild steel tubes electric resistant or induction butt welded, welding by electric plant, wire nails, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, flats up to 10 mm in thickness, galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm, g.i trafford profile sheet 0.35mm thick, precoated aluminium traffored sheet 0.450 mm thick, structural steel such as tees,angles,channels and rs joists, stainless steel screws 50 mm, red oxide zinc chromate primer, precoated galvanised steel plain ridges, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates, g.i pipe 40mm dia, gi plain washer thick, twisted steel/deformed bars, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charge of 10 hp engine and pump set - materials, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, solid blocks of size 30x20x20cm, solid blocks of size 30x20x15cm, hollow blok of size 40x20x10cm, interlocking c.c. paver block (80 mm thick, m-30), pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 63 mm outer dia . 4kgf/cm2, pvc pipe 32 mm outer dia 6kgf/cm2, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm2, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc elbow 75 mm dia, pvc 45 degree elbow 75 mm dia, pvc socket/coupling 75 mm dia, pvc reducer 63x50 mm dia, pvc vent cowl 75 mm dia, vitreous china orrisa type w.c. pan size 580 mm, brass stop-cock 15 mm dia, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type water closet, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, c.i. bracket for wash basin and sinks, polyethylene water storage tank with cove

Central Government/Public Sector

CTN :45404258

10 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of m s tapered washer to rdso drg. no. t-3930 or latest alterations if any, use for 1 in 12 cms crossing and conforming to irs specification serial no. t-10-2025 or latest amendment if any. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45404705

15 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of m s tapered washer as per rdso drg. no. t5847 or latest alterations if any, use for 1 in 8.5 cms crossing and conforming to irs specification serial no. t-10-2025 or latest amendment if any. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45370535

10 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of 1.5 sq mm electric wire , 2.5 sq mm electric wire , acrylic sheet fibre sheets 4 ft x 8 ft , aggregate 20mm , aluminium door handle 150mm , cement 43 grade, make ultra tech , cgi sheet 10 ft x 3 ft , cgi sheet 12 ft x 3 ft , change over switch 100a , change over switch 200a , change over switch 300a , change over switch 63a , cp angle cock , cp pillar cock , keroheater 22 g wicks , keroheater 33 g wicks , led bulb 9w , led bulbs 20w , main coloumn 3000mm , main switch 100a , mcb box 10 way , mcb box 6 way , mcb double pole 32 amps , mcb dp 63 amps , mcb single pole 16 amp , mcb sp 32 amps , nut bolt washer for srt , pbs roll plain bitumen saturated , ply wood 6 ft x 4 ft 16mm , ply wood 8 ft x 4 ft 8mm , plywood 6.5 ft x 4ft x12mm , puff panel 1000 x 3000 mm , purlin 1500mm , pvc bib cock , pvc cashing caping 25mm , pvc connection 15mm dia 600mm long , pvc waste pipe 32mm dia for wash basin , roof sheet 1000mm x 3000mm , sand , sand bags , screw 1 inch , screw 2 inch , sds screw 2 inch , sds screw 3 inch , sliding bolt , srt , switch 6 amp , switch socket comb 15 amp , switch socket comb 5 amp , tiles 600mm x 600mm , tower bolt , truss 2000mm , tube light led 1200mm 20w , tubelight 10 w , urinal port , wash bashin , water sintex 500 ltr , window glass

CTN :45375496

13 Jun, 2026 NA

Kozhikode - Kerala

Tender For supply of materials for mahathma gandhi nregs material works - work materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, portland cement, royalty for good earth, coarse sand (zone iii), fine sand (zone iv), twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots,10 nos, galvanised steel j or l hooks 8 mm dia,10 nos, g.i limpet washer,50 nos, bitumen washer,50 nos, wire nails, mild steel tubes hot finished welded type, red oxide zinc chromate primer, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, gi trafford profile sheet 0.35mm thick, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, solid blocks of size 40x20x15cm, solid blocks of size 40x20x10cm, laterate stone of size 40x20x15cm, quarry waste, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc bend 63 mm dia, pvc elbow 63 mm dia

Tapered Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector