Latest tapered washer Tenders | Government tapered washer Tenders

Central Government/Public Sector

CTN :45471011

12 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of item requires for ra-088770, details as per the annexure-i attached - bib cock flange big, 1.5" flexible ss extension, 1/2" flexible ss extension, 3/4" to 1/2" adaptor, antique sliding door concealed handle, antique toilet knob, big handle (9") brass, make desecure or similar, bolt extractor set, brush holder make: jaquar or similar, ceramic wash basin with full pedestal, white, make: jaquar or similar, ceramic western commode with ceramic flush tank- two piece colour-white, with pvc pipe for commode chute (2 mtr long, jaquar or similar, commercial ply 19 mm, concealed type handle for sliding door, concrete drill bit 4mm, corner shelf with bracket, jaquar or similar, cup washer (500 nos. pkt), curtain hook, curtain rod & holder, steel finish (1 ft), decorative thermosetting synthtic resin bonded laminated, sheet (lp sheet) as per sample, door closer heavy duty, door pusher, godrej or similar, drawer sliding channel assembly, exposed part kit of concealed stop cock con-chr-069 ftk, fancy barrel bolt 4" antique, fancy barrel bolt 6", make desecure or similar, fancy coat hook, make desecure or similar, fancy i hook 4", make desecure or similar, fancy mirror 18" x 18", fevicol m/s pidilite or similar, full turn conti spindle 1/2", hand shower 95 mm hsh-chr-1737 round, health faucet ald-563 of jaquaror similar model of hindware/grohe/plumber or hatim, heatx (adhesive), m/s pidilite or similar, hinges ss 4x12, magnet for cupboard, many types of screw (1 box = 500 screws), metropole flush valve dual flow 32 mm flv-chr-1085, mixer cock with hand shower assembly con-0281kn of make jaquar or similar model of hindware/grohe/plumber or hatim, hand shower should be suitable for supplied mixer cock with 2 mtr flexible pipe, mortise lock, ms bush, normal mirror 18" x 18", nrv 15mm, over head shower ohs-chr-1605 square 150x150 mm, plain shelf (big) with bracket, jaquar or similar, plain shelf (small) with bracket, jaquar or similar, pvc connector pipe (3 feet long), pvc pipe dia 100 mm 10 feet with pvc coupling for commode outlet, reduced body of concelaed stop cock ald-chr-069 ft, ss extension 1", ss extension 2", screw with cap (mirror screw), sink cock with swinging con-chr-347knm, sliding door rolling wheel assembly, small handle (6") brass, make desecure or similar, soap disc holder, jaquar make or similar, soap dispenser, make: jaquar or similar, ss angle stop cock with flange (round knob), model con-059 of jaquar or similar model of hindware/grohe/plumber or hatim, ss drain jali, ss drain jali for wash basin sink with circular hole, ss hinges 3", ss hinges 4", ss long bib cock for kitchen sink model no con-107kn of jaquar or similar model of hindware/grohe/plumber or hatim., ss long bib cock model con-107kn of make jaquar or similar model of hindware/grohe/plumber or hatim., ss mesh connector pipe (1.5 feet long), ss wash basin mixer cock with all accessories model con-167kn of jaquar or similar model of hindware/grohe/plumber or hatim, stainless steel coating on berth handle, stop cock with flange (horizontal) con-059kn of jaquar or similar model of hindware/grohe/plumber or hatim, teak wood bidding as per sample, thermostatic shower panel with rain fall shower head -adjustable nozzels and tub spout (apple), toilet paper holder with stainless steel flap, make: jaquar or similar, towel holder/rack 600 mm long, make jaquar or similar, two way bib cock model no-con-041kn of jaquar or similar model of hindware/grohe/plumber or hatim, wall mounted bath shower con-sha-483 of make jaquar or similar model of hindware/grohe/plumber or hatim, wall mounted table bracket, wash basin with pedestal, y strainer 15mm

Central Government/Public Sector

CTN :45479296

29 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of disk lock washer m 24 as per rdso drg. no. sk-98145 alt-12 item no. 20 & icf individual drawing no. icf/std-2-2-009 alt j. matl.& spec. as per drg. (acceptable make-disc lock/nord lock/durlock/gallock) [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45112589

18 Jun, 2026 14.26 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of spares for hydrogen generator assembly, make teledyne energy system inc. (usa), installed in hydrogen plant at ph-iv, stps, sarni. - spares for hydrogen generator assembly, make teledyne energy system inc. (usa), installed in hydrogen plant at ph-iv, stps, sarni., washer, lock, 300sst, .25 nom, es-090048 (item id: sk03864 ), washer, flat, es-090672 (item id: sk03865 ), o-ring, ethylene propylene, 4.125idx.125wd, es-100728 (item id: sk03305 ), screw, cap. hex hd, es-090552 (item id: sk03857 ), screw, cap, hex head, es-090135 (item id: sk03867 ), filter element (koh), es-m14152001 (item id: sk01653), washer, lock, .38 nom, 300 cres es-090132 (item id: sk03871 ), check valve on generator , es-001507 (item id: sk04091 ), insert assembly, koh pump sk05643 (item id: sk05643), impeller magnet housing, sk05644 (item id: sk05644), feed water pump without motor (item id: sk05644)

Central Government/Public Sector

CTN :45502345

17 Jun, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For procurement of spares for tata tfc 280 crane (machine sl.no.tfc 280c -1234) stationed at haddo wharf, sri vijaya puram -driving plate (part no 3200 z 1006) 1.04 1 no. 1.05 4 nos. 1.06 8 nos. 1.07 2 nos. 1.08 1 no. 1.09 1 no. 1.10 1 no. 1.11 1 no. 1.12 2 nos. 1.13 10 nos. 1.14 1 no. 1.15 1 no. 1.16 10 nos. 1.17 1 no. 1.18 2 nos. 1.19 2 nos. 1.20 3 nos. cotter pin (part no 2201 v065) washer lock nut (part no 3200 z 1030) cotter pin (part no 3200 z 1023) cotter pins (part no 3200 z 1024) gasketset(corksheet3mmthicksize3'x2'04nos)(part no 3220 n4) flexible hose assembly (complete set) (part no a 1663a) washer lock (part no m 2046 af) nut jam hex (part no m 2027 an) hyd. fitting (part no m 268) pin (part no 19 t80) shifter shoe (part no 18t 3450) pin (part no 19t 1067) split pin (part no 2201 v055) air cylinder (part no 3238n3) belt (part no 7z 210d612) carbon brush (part no 3200 z 245) air breather (part no 3214 z3) 1.21 12 nos. 1.22 10 nos. cotter pin 7/16" x 4" (part no 2201 v 135) cotter pin (part no 2201 v121) alhw/dcem/tech(p-71)/1/2026-db-mech i/11139/2026 11 file no. alhw/dcem/tech(p-71)/1/2026-db-mech (computer no. 3160) ,diaphragm (part no 3200 z 483) diaphragm (part no 3200 z 408) rope clamp (19mm) (part no 30 z 1d 8) rope clamp (25mm) (part no 30 z 1d13) stud (part no 20t4124d9) trunion (part no 18t4931) hex nut (part no 2045v003)stud (part no 20t412402) spring planetary brake band assy. (4 90 nos. 1.35 20 nos. 1.36 1 no. 1.37 10 nos. lining (part no 15p689) rivet (part no 20h1658d4) rivet (part no

Central Government/Public Sector

CTN :45073196

18 Jun, 2026 NA

Barh - Bihar

Tender For corrigendum : procurement of generator spares for capital overhauling of 660 mwgenerator for ntpc barh stage ii - bolt,bhel/siemens, compensating shim t=0.2:pm0a65k64b32, compensating shim t=0.5:pm0a65k64b24, compensating shim t=1:pm0a65k64b08, compensating shim t=16:pm0a66h33k73, cover:psk047t028, covering:pm0a67e75c51, cup spring 28*12,5*1,9:pm0a00b34k08, cup spring washer 34*17*1,8:pm0a00a44e79, filling piece:psk037r039, gasket a29*4:pm0a00c64d90, grub screw:psk050p534, grub screw m5*12-0spae:pm0a00a27a52, grub screw m5*8:pm0a67k47h70, grub screw m6*8-0spae:pm0a00a26h73, grub screw m6*8-0spae:pm0a00a27a78, hexagon head screw m10*16:pm0a66h94f53, hexagon head screw m10*40:pm0a54j70g62, holder:pm0a65j76f67, hose:pm0a67f97g74, hose clip 4,8*188:pm0a57a15h52, insulating bolt:pm0a65j76f83, insulating washer b20,5*40*4:pm0a55g45f8, insulation:pm0a66j04g42, lock washer:pm0a67f56a27, lock washer :pm0a67c01b11, lock washer :pm0a67b70c58, lock washer 16*116:pm0a67b69c27, locking bar:pm0a52j27e74, locking bar:pm0a52j27e82, l-profile:pm0a58a64j33, o-ring 320*7:pm0a67c71k57, pipe 11*1,4*57:pm0a65g63a07, pipe 17*2,4*15:pm0a66d91d35, pipe 20*1,9*21:pm0a67k38f22, pipe 20*1,9*34:pm0a66j26k00, pipe 20*1,9*61:pm0a66j04g59, plate 0,1*10*780 :pm0a67a24e63, plate 0,5*55*780:pm0a67a24e71, plug:pm0a67k48e63, plug-in brush holder:p0048962100, profile 103-002*780:pm0a67k52d33, round bar 10 mm: pm0a62b42a70, round bar 5 mm:pm0a55e59e65, round bar 6 mm:pm0a62b42a47, round bar 8 mm:pm0a62b42a54, round nut:pm0a65f52c42, round nut epgm203:pm0a66j13c54, screw bolt ep-gf:pm0a66j13c70, screw plug g1/2a:pm0a00a45d44, screw plug m10*15:pm0a57j42e78, screw plug m20*18:pm0a57j42e86, seal cap:pm0a55a10c43, seal cap:pm0a50b67e02, segment epgc203:pm0a66h52h42, sheet:pm0a67a56c67, sheet epgm203:pm0a66h53b61, shim 12*2:pm0a66e09a79, shim epgc203:pm0a66h73h14, washer b12,5*22*3:pm0a50a00j43, washer b13*28*4:pm0a50a35j23, washer b17:pm0a00a38d07, washer b6,4*11,5*1,5:pm0a61e49e01, plug-in brush holder, hose line, profile, insulating ring l=19, oring d74x3, viton rubber profile l=2670, seal ring, o-ring, o-ring, o-ring,072-00 psk047q570,bhel, sheet, insulating part, insulating part, profile 7.5*9*2400, insulation, pipe 16*1.9*19, 900/7000r:filter mat, kwu:seal strip, insulation, compensating shim:pm0a65k64a74, lock washer 10*70:p0048963500, multi contact band;drg01430501044/16, elr70/90:scru hex a -8.8, m16x120, hex hd bolt,bhel,thdf-115/67, hex hd nut,m16,hts,bhel,thdf-115/67, insulating bolt,111,m12x35,bhel, insulating bolt,112,m12x35,bhel, resin cy-205 for bhel make generator, loctite 222,01350801039,bhel,thdf-115/67, anabond 202,bhel,thdf-115/67, spacer, locking shoe, fbr gls tape,bhel,thdf-115/67, polyster fibre glass tape is:10415, shim epgc203:pm0a66h53a62, shim epgc203:pm0a66h53a70, shim epgm203:pm0a66h53a88, small size valve:psk054u053, spring ring a8:pm0a00a39g10, spring washer b16:pm0a00a44b07, spring washer b8:pm0a52h67d24, taper pin:pm0a61a48h16, washer 24-200hv:pm0a00a38b17, washer a17*35*4:pm0a00a43f96, angle,pm0a67g05g00,bhel,thdf-115/67, ball valve dn25-g1;pn25:psk033p294, brush holder:pm0a68a48e12, gasket,pm0a66a41g90,bhel,thdf-115/67, holding piece:psk017k700, initial guide blade:pm0a67h32k33, initial guide blade:pm0a67h32k41, initial guide blade:pm0a67h32k58, parallel pin a20h8*80:pm0a67f19c31, round nut:pm0a00b79b92, screw bolt:pm0a56k80a22, stationary blade:pm0a67h32j75, stationary blade:pm0a67h32k09, stationary blade:pm0a67h32k17, thdf115/67:insulating gasket, ring, o ring to spec. tg 60158 32x3, seal element, oring 28x3, u-profile ring, o-ring, o-ring, o-ring,01393701017&52,bhel,thdf-115/67, scru hex, bolt hex hd,01390101053,bhel,thdf-115/67, o-ring,11390801007,bhel,thdf-115/67, o-ring,bhel,thdf-115/67, thdf115/67:o ring 193x6, curing agent z,01391201117 & 39,bhel, resin e8702, fine mica powder,01391201117 & 35,bhel, hardener,bhel,thdf-115/67, tension disc, taper pin;end shield(ee)#38#01393701000, araldite av 138,01350801035,bhel, ch

Central Government/Public Sector

CTN :45280896

16 Jun, 2026 6.35 Lacs

Guna - Madhya Pradesh

Tender For corrigendum : tender for supply of shaft along with impeller keys , bearing lock nuts (2 nos.) and lock washers (2 nos.) , material of construction of shaft and impeller keys- forged aisi 316(forging conforming to astm standard a-473) , bearing lock nut material- en-8 , as per drawing no. nfv/u/m-193 and nfvp/m/u/lw/p14 (drawing for lock washer) , for hydrolyser feed pump 11-p-14a/b. , shaft size f85x762x5l 820 , impeller lock nut radial side , material of construction- sus420j2/taft or equivalent. dimensions as per nfl drawing no.- nfvp/u/m/p6-678 fluid- steam condensate , working pressure- 30kg/sq. cm. , working temperature- 80 degree celsius , impeller lock nut thrust side , material of construction- sus420j2/taft or equivalent. dimensions as per nfl drawing no.- nfvp/u/m/p6-678 fluid- steam condensate , working pressure- 30kg/sq. cm. , working temperature- 80 degree celsius , shaft with bearing locknut and lock washer , material of construction- sus420j2 or equivalent. dimensions- as per nfl drawing no.- nfv/u/m-187 fluid- steam condensate , working pressure- 30kg/sq. working temperature- 80 degree celsius. , shaft along with impeller lock nut and keys as per drawing no.nfv/u/m-194 rev.(2) , material of construction-forged aisi 316 conforming to astm standard a-473). , shaft along with impeller nut , bearing lock nut and key as per drawing no. nfv/u/m-54 rev.-3 , material of construction of shaft , impeller nut and key- forged astm a-276 ss 316 , bearing lock nut material- en-8.

CTN :45506365

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of spares of helo traversing system afas ibs and machinary control and monitoring system 25blec001 c - grease nipple , hooter , mechanical lock pin limit switch , lubrication unit , pump element lub unit , spring feed lubricator , ram cylinder seal kit , o ring for straight male stud coupling 1 14 bspx30 mm od , return line case drain filter element , pressure reducing valve 1 14 nb 7 bar to 1.5 bar , replenishing low pressure inline filter element , power fuse sf94939ooo rating 160a , sea water pressure switch , aux contactor 240v 2no 2nc , bush for turret hinge , hose 07 id 12 7 x 1 5 mts lg , suction hose id- 38 1x 1 10 mts , ls hose id-7 9x 0 7 mts lg , delivery hose id 31 8 0 5 mts , return line filter , qdc p line female , qdc p line and tank line male , qdc ls and drain female , qdc ls and drain male , indication lamp green 110v ac , ss hexagon head nut grade ss316 nut size m12 , ss spring washer diameter 12 mm , mcb 2p 32a , 63a mccb 3p , mccb 160a , mccb 25a , mo0 4no contactor , mo 0 2no 2nc contactor , aux cont bl mnx 95 550 contr 2nd right , vme 10 channel serial isolator card aitech c106 , hydraulic hose pipe , pressure gague sta , 1 change over 24v dc slim relay make- finder , exhaust fan , cat 6 cable patch chord , smps for mfc processor 110 220v ac to 5vdc 4a 12v dc 1a , exhaust fan size 80x80x25 mm , pressure transmitter 0 10 bar mbs33m , pressure transmitter 0 10 bar emp 2 , dc power supply , push button , lamp , lamp , lamp , lamp , lamp , lamp , dl 100 mccb 25a , mcb hager 3p 2a c curve type ncn 302n , selector switch22.5mm type no m22 wrk4 , pressure sensor level transmitter hyd , mini terminal block 29 x 27mm ref cat no cmt4 , cont trafo 380 240v 1 5 kva bur 1500va bur ins class f frq 50hz , overload relay l t backup fuse up to 25a contactor mountin , gland packing 1 set 1x10 m , shock mounts y 450 , high tensile hex boltm20x80l , m20 spring washer , pressure gauge 100 mm dial 0 250 bar , distance tube , spacer , m20 hex nut 2 , grease nipple g1 4 , deliver hose with dko fitt both side bsp 2 id 50x5000l , lubrication unit , shock mount x 70 , male stud coupling 1 4 bsp x 10mm od , straight coupling 10 mm odx 10mm od , equal union 1 4 bsp x 1 4 bsp 60 degree cone angle , straight bulkhead coupling 10 mm odx10mm od , 1 4 bore 1 4 bsp both ends str female swivel nut len 500 mm , clamp for 10 mm od tube , bonded seal 3 8 bsp , bonded seal 3 4 bsp , bonded seal 1 1 4 bsp , bonded seal 1 1 2 bsp , bonded seal 2 bsp , 14 tp 20 atc x fe insulated cores lfh outer layer 250v , 3 core x 2 5 mm2 abc hf xlpe insulated shf2 , 24vdc omron relay socket pyf08a , plc relay 24v single contact 2 pdt 6a , 2tp x 0 5 mm2 atc hf xlpe insulated shf2 , 100a terminal block , qdc suction female , qdc suction male , axial piston pump , axial piston pump , panel pc

CTN :45399260

19 Jun, 2026 45.56 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : tn-mm-2170 supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos. plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg. no. t-696-699 (1 set = 2 pair (4 fish plate, 8 nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:- t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06 nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-(090)(one setcomprise of 2 nos. fish plate & 4 nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt with flat&spring washer size(16x50x38 )mm as per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06 nos.) railway drawing no.- t-4885- 86, t-4887-88, t-4889-90, rail dolly bg attachment for transportation of prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-4902) and with psc sleepers (rt-4149) for max. gap =80 mm(in single gap)(fittings- plate screw,washer,nut bolt,m.s. bracket,c.i. chair,check rails,tongue rails,stock rails,gap avoid rails,split pin etc. as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01 rh and 01 lh tounge rail length 12356 mm and stock rail 01 lh & 01 rh 13000 mm l

CTN :45399878

19 Jun, 2026 45.56 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos., plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg., no. t-696-699 (1 set = 2 pair (4 fish plate, 8, nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso, no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg, for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:-, t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box, railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06, nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-, 090)(one setcomprise of 2 nos. fish plate & 4, nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt, with flat&spring washer size(16x50x38 )mm as, per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52, 60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06, nos.) railway drawing no.- t-4885- 86, t-4887-88, t-, 4889-90, rail dolly bg attachment for transportation of, prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-, 4902) and with psc sleepers (rt-4149) for max., gap =80 mm(in single gap), (fittings- plate screw,washer,nut bolt,m.s., bracket,c.i. chair,check rails,tongue, rails,stock rails,gap avoid rails,split pin etc., as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01, rh and 01 lh tounge rail length 12356 mm and s

CTN :45472950

22 Jul, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of set of spares of msu components for 1600 hp demu/dpc make cgl (one set consisting 23 items as per annexure 'b'enclosed) - suspension tube mechnied, taper rolling bearing, taper rolling bearing, abutment washer, abutment piece, bearing housing, end cover, gear case cover, gear case labyrinth, outer labyrinth, labyrinth gwe, inner labyrinth rwe, shaft seal, gease nipple, hex hd bolt m12 x 70, disc lock washer, hex hd bolt m10 x 25, disc lock washer, end sleeve, plug g ½", plug ms, o ring suspension tube, o ring for gear case cover

Tapered Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector