Latest telescopic channel Tenders | Government telescopic channel Tenders

Central Government And Public Sector

CTN :45063818

12 May, 2026 NA

Multi City - Multi State

Tender For supply of item no.1 - cs cold rolled sheet as per specification attached,item no.2- structural steel plate as per specification attached,item no.3 - ms angle 50 x 50 x 6 mm as per specification attached,item no.4- structural steel channel as per specification attached,item no.5- steel flat isf as per specification attached,item no.6- isa angle structural steel re-rolled as per specification attached,item no.7- ms flat isf as per specification attached

State Government

CTN :45051243

02 May, 2026 20.96 Lacs

Multi City - Telangana

Tender For emergency structural strengthening and waterlightness treatment to the common stone masonry wall between the treated water balancing tank and waste water channel at asifnagar filter beds, including thorough surface preparation, fixing of 25x25x2mm gi reinforcement mesh, and high-pressure pneumatic guniting (1:2 mix) to 50mm thickness using rapid-setting accelerators and waterproofing compounds and addition of sodium hypo chlorite solution to raw water conduit for completion within a 12 hour shutdown period under asifnagar filter beds setion, sd-ii, trans.div.i, himayathsagar

Central Government/Public Sector

CTN :45031536

07 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap rcc water tank¿02 nos consisting of ¿structural steel(ms angle, channel, i beam, rolling shutter, plate, tie plate, gi pipe, tie bar patti, toothed gear wheel, window grill, pipe of hand rail, purlin, truss, gi ladder, plate, window sheet, pgi sheet, down take pipes, valley gutter,m20 hex nuts, )structural rails, reinforcement bar, wooden, gi sheets/pipes, mangalore tiles, , flooring(pcc), brick masonary, stone masonary, rcc/pre cast slab/reinforcement ,etc. remarks : - 1. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 2. lot is approachable by kutcha/pucca road. 3. lot number is exhibited/painted on the structure. 4. the quantity is worked out on approximate basis. 5. the delivery will be made on lot basis and no part delivery will be allowed. 6. materials like electric wires, fittings & cables and other such kind of materials. available in side the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. 7. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered. 8. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted upto ground level only 9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible for his labors if any accident/unusual incident occurs at worksite/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same. 11. after complete removal of rcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery. 12. purchaser should personally visit the site and the see the lot in regard to loading/lifting. no claim will be entertained after saleof lot. 13. only structural rails will be delivered. other type of rails will not be delivered. 14. lot is ok for sale with above observations. stock holder :- sse( works) igp qty :-1.0 by lot.

Central Government/Public Sector

CTN :45031537

07 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap condemned/abandoned railway quarter- 1. ksra (east)- h2/f1/d2 d 146/147 2. ksra (west)- ma/ 148-150 a& b rb-1/159/1-2,3-4 k туре к/89 k type k/89 rb-1/152/1-8 grand total 38 nos consisting of structural steel(ms angle, channel, i beam, rolling shutter, plate, tie plate, gi pipe, tie bar patti, toothed gear wheel, window grill, pipe of hand rail, purlin, truss, gi ladder, plate, window sheet, pgi sheet, down take pipes, valley gutter, m20 hex nuts,) structural rails, reinforcement bar, wooden, gi sheets/pipes,mangalore tiles,, flooring(pcc), brick masonary, stone masonary, rcc/pre cast slab/reinforcement,etc. remark :-1. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 2. lot is approachable by kutcha/pucca road.3. lot number is exhibited/painted on the structure.4. the quantity is worked out on approximate basis.5. the delivery will be made on lot basis and no part delivery will be allowed.6. materials like electric wires, fittings & cables and other such kind of materials. available inside the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. 7. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered.8. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted upto ground level only 9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible for his labours if any accident/unusual incident occurs at worksite/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same. 11. after complete removal of rcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery. 12. purchaser should personally visit the site and the see the lot in regard to loading/lifting. no claim will be entertained after sale of lot. 13. only structural rails will be delivered. other type of rails will not be delivered. 14. lot is ok for sale with above observations. stock holder :- sse( work)igp ,qty:- 1.0 by lot

Central Government And Public Sector

CTN :44760622

08 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

Central Government/Public Sector

CTN :44687281

28 Apr, 2026 3.00 Crore

Mumbai - Maharashtra

Tender For corrigendum : supply of module hostel furniture d d - boq 1 , boq 2 , boq 3 , boq 4 , boq 5 , boq 6 , boq 7 proving and fixing metal single bed of size: 2050l x 973w x 720h. material- headboard panels are made of 18 mm thick prelaminated particle board with 2 mm thick pvc edge banding all around. bed leg, frame structure consist of metal frame made of ms with the size of 50.8 x25.4 x 1.2mm thick. assembly inner slats of square stube 19 x 1.0mm thick ms erw tube as per is:7138. headboard & tail board: head board & tail board should be made up of square pipe 50 x 1.2mm & 25.4x1.0mm thick ms erw tube as per is:7138 and support bracket ms sheet is:513 head/tail board connected with bed frame with m8 bolt. construction- know down. bed shall be powder coated in thickness of 50-60 micron. mattress panel shall be made of virgin polypropylene with circular honeycomb structure. sheet shall have 09 layer of polypropylene with the gsm of 3000. bubble guard sheet shall be water proof, termite proof etc with 100% recyclable material. the manufacturer shall have iso 9001, 14001, 45001, 50001 accreditations by nabcb only, and cii certified green co gold, green guard compliance, aiota certificate and item shall be complete as per guiding image, manufacturer s specification and direction of engineer in charge, providing and supplying table with two drawer (overall size 900mm w x 600mm d x 750 ht). top shall be made up of 18mm thick prelaminated particle board confirming is 12823:1990 with 2 mm thick pvc edge banding. unrestructured and footrest shall be made of 25.4x25.4x1.2 mm thick erw tube with 50 microns powder coating. modesty shall be made of 0.8 mm thick crca sheet with approved shade of powder coating. storage drawer shall be made of 0.6 mm thick crca sheet and drawer shall be telescopic channel. storage shall have ) /bid number : gem/2026/b/7388588 * /dated: 28-03-2026 & & / bid document 1 / 17

Central Government/Public Sector

CTN :44942576

28 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, sliding doors, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 3&4

Central Government And Public Sector

CTN :44942497

30 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - structural cutting girder, joist, channel, angle, tees, checker plate, rail structure & other scrap, qty-15.700 mt. (cutting is allowed)

CTN :44925761

25 Apr, 2026 12.69 Lacs

Multi City - Karnataka

Tender For block-level survey of the command area of the respective canal using remote sensing (r.s.) maps to identify and delineate the proposed field irrigation channel (fic) network, including marking of field channels on r.s. maps and correlating the same with ground profiles through field verification. finalizing fic alignments preferably along field boundaries as per field conditions. proposing suitable cross-drainage works and other required structural works at appropriate locations and designing the same. preparation of detailed estimates for fics, collection of land records/documents such as rtcs, preparation of detailed drawings and designs, comprehensive report, longitudinal sections (l-sections) of fics, preparation of autocad drawings including joining maps and individual sketches, and superimposition of sketches on r.s. maps, etc., complete in all respects, as directed by the engineer-in-charge

CTN :44883983

23 Apr, 2026 NA

Krishna - Andhra Pradesh

Tender For supply of chain conveyor system installation , dismantling and shifting of existing conveyor system , conveyor mid section drive unit , conveyor helical drive unit supply installation , fabrication and installation of mid drive assembly , conveyor bend section supply installation , supply and installation of stainless steel plates , shifting of 24head platform , shifting of 24head adjustment scale , 12inch and 14inch pipeline laying work , welding and cutting of hydrant pipeline , anti corrosion wrapping coating of hydrant pipeline , replacement of 12inch valve , supply of industrial chipping machine , rcc , connection of msv vapour pipeline , supply and installation of 1inch pipeline , painting of 6inch pipeline , installation of isolation valves , replacement of channel structure , repair and maintenance of telescope booms , chain conveyor system supply , supply of stainless steel soap trays , supply of mild steel soap trays , supply of heavy duty soap trays , fabrication of pipeline and structural side cladding , supply and installation of drip trays with y bend

Telescopic Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors