Latest temperature gauges Tenders | Government temperature gauges Tenders

Central Government/Public Sector

CTN :45502353

03 Jul, 2026 NA

Multi City - Multi State

Tender For corrigendum : spm/b933-000-yi-mr-1100/192 - pressure and temperature gauges for bina petchem and refinery expansion project (bprep)

CTN :45559939

04 Jul, 2026 22.40 Lacs

Sonipat - Haryana

Tender For corrigendum : supply of deflection of curved member apparatus , shear centre apparatus , portal frame apparatus , two hinged arch apparatus , cable geometry and statics apparatus , unsymmetrical bending apparatus , bending moment and shear force apparatus , maxwell reciprocal theorem apparatus , deflection of continuous beam apparatus , slope and deflection apparatus , behaviour of column and beams apparatus , elastic properties of deflection beam apparatus , two hinged arch apparatus , analysis of elastically coupled beam apparatus , pin joint truss apparatus , analysis of redundant joint apparatus , discharge over notches apparatus , pitot tube setup , impact of jet on vanes apparatus , digital handheld water velocity meters , tilting open bed flow channel flume , automatic traffic classification and counting counter , length gauge with isi certification mark is 2386 part i , speed gun speedster iii , gopro hero camera with tripod stand , thickness gauge with isi certification mark is 2386 part i , 75 mm sieve , 63 mm sieve , 50 mm sieve , 37 point 5 mm sieve , 25 mm sieve , 12 point 5 mm sieve , 9 point 5 mm sieve , 4 point 75 mm sieve , 2 point 36 mm sieve , gi pan and lid , 1 point 18 mm sieve , 600 micron sieve , 300 micron sieve , 150 micron sieve , 75 micron sieve , brass pan and lid , aggregate impact tester is 2386 part iv , crushing value apparatus is 2386 part iv , bitumen penetration kit is 1203 , flash point open and fire point cleveland is 1448 part 69 , ring and ball apparatus semi automatic is 1205 * /bid number : gem/2026/b/7615986 + /dated: 15-06-2026 ' ' / bid document 1 / 30

CTN :45688680

06 Jul, 2026 NA

Katipala - Karnataka

Tender For tender for calibration of pressure gauges , calibration of temperature gauges , calibration of pressure transmitter , calibration of temperature transmitter , calibration of pressure switch , calibration of differential pressure transmitter , calibration of rtd_ temp element , calibration of flow transmitter

Central Government/Public Sector

CTN :45513795

22 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of digital force gauge

Central Government/Public Sector

CTN :45467531

15 Jun, 2026 NA

Chatra - Jharkhand

Tender For supply of mandatory spares for chemical dosing skids , mandatory spares for oxygen dosing skids - drive shaft cum worm , drive worm wheel , connecting rod plate , cross head guide bush , plunger , plug , oil seal , washer , gland nut , electronic transmitter , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , pressure transmitter , differential pressure transmitter , level transmitter , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , pressure gauge , pressure gauge , diff. pressure gauge , process actuated switch devices includes all type of pressure, differential pressure, flow, , temperature, differential temperature, level switch devices. , process connection piping (for impulse piping/tubing, sampling piping/tubing and air supply piping , applicable) , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , measuring instrument , electronic transmitters , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , level transmitter (ultrasonic / radar type) , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , process actuated switch devices includes all type of pressure, differential pressure, flow, temperature, differential temperature, level switch devices. , pd type flow transmitters , any other instrument (if applicable) , process connection piping (for impulse piping/ , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , purge meter , filter regulators , mass flow controller , control valves actuators & accessories , pneumatic & electro-hydraulic actuator assembly , valve trim (including cage, plug, stem, seat ring, guide busing etc.) , diaphragm 'o' rings seals etc, all types of make etc. , pressure gauges of all types of make, rating, etc. , solenoid valves (if applicable) , positioner unit (complete unit) , pneumatic air filter/regulator of each type, makes rating etc. , air lock relays

CTN :44610275

11 Jun, 2026 NA

Ernakulam - Kerala

Tender For bid to ras corrigendum : tender for supply of thermostat for oa 1854 , star delta timer 3 60sec 240v ac 50hz , shaft for fan for ahu , split ac model ftks 71 , liquied line filter drier , core for liquid line filter drier , auxiliary contacts , expansion valve ahu 2 5point6 tr , set of gasket both ends , corrossion protection plug , under voltage relay 415v 50 hz , set of seals for oil cooler , 100a hand change over swithch , 63a hand change over swithch , 160 a mccb , plc electronic module analogue input 6960379 , spares for oil duplex filter , reagent a in plastic bottle 1000 ml , regent b in plastic bottle 50 ml , regent e in plastic bottel 500 ml , regent f in plastic bottle 200 ml , regent g in plastic bottle 500 ml , filter paper 50 nos , fcu 4 fan coil unit , fcu 6 , angle valve 1 4 x 1 4 , gauge pressure compound 0 300 psi 2 dia suction , gauge temp 0point150c dial with 4mtr sensor 6 , main engine f w cooling prpointtransmitter range 0 to 6 bar , gear box s w pressure oulet indicator range 0 to 6 bar , temperature gauges 10 to 50 , temp sensor resistance thermometer pt 100 , starting air pressure transmitter range 0 to 60 bar , starting air pressure indicator range 0 to 60 bar , pcb b1 , electro magnetic valve , drive pin , set of o rings , dry running protection , test cock , level sensing probe , piece distance , gasket , cord type tc air filter insert copper mesh , socket screw , oil separator 7 8 , ring nut , locking washer , thermometer , 5hp 4 pole f 5112m condpointpump motor , gasket , set of spare screws , flow switch , differential pressure relief valve , o ring for filter element , shaft seal , membrance cleaner i , activated carbon , oil seal , oil seal , mechanical seal , kit valve , mechanical seal lp feed pump water , product rotameter , pressure guage 0 140 kg sqpointcm , nc solenoid valve coil 2 way , cd 9 assembly kit , hpointppoint hose 1 bsp , v belt , top cover gasket for cartridge filter , o ring for carbon filter , membrane cleaner ii , membrane cleaner iii , neutralite

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45197775

09 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : tender for supply of c25m260055 procurement of temperature gauges for cpcl chennai - tempr.gauge , -50 to 50 deg.c , stem-320 mm , temp. gauge , -50 to100 deg.c , stem-320 mm , temp.gauge , 0-100 deg.c , stem-320 mm , temperature gauge , stem length-450 mm , temperature gauge , stem length-550 mm , temperature gauge , stem length-320 mm , temp gauge , bimetal u , 1/2 m , 0-200 , l-450 , gauge temp bimetallic , 0-200 degc , 500 mm , temp. gauge 0-250 deg.c , stem-300 mm , temp.gauge , 0 to 250 deg.c , stem-450mm , temperature gauge , range-0 to 250 deg.c , gauge , temp , stem length 540 mm 0-250 c , temp.gauge , 0-300 deg.c , stem-450 mm , temp.gauge , 0-300 deg.c , stem-550 mm , temp.gauge , 0-400 deg.c , stem-320 mm , temp. gauge0-400 deg.cstem-420 mm , gauge temp , bimetallic , 0-400 degc , 405mm , temp. gauge , 0 to 400 deg.c. , stem - 550mm , temp. gauge 0-450 deg.c , stem-450 mm , temp. gauge gas l-400mm 0-600 deg.c , temp. gauge , 0-800 , stem-440mm