Tender For distribution transformer of rating 500 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, on load type tap changer for variation of hv voltage from +5% to -15% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, confirming to is 1180 (part 1): 2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperatureindicators will be provided as per clause 20.2 of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall confirm to is/iec 60137. the low voltage bushings (4 nos.) shall confirm to is 7421. suitable cable-end box along with cable entry hole glands is tobe provided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is 1180 (part 1) latest. (ii) routine test certificates as per is: 1180(part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d), (e) of is: 1180 (part 1) latest. bee star rating:- 3 or above (firm shall submit a valid bee certificate for the offered product with desired bee star rating). [ warranty period: 30 months after the date of delivery ] ]
Tender For tender for repairing and calibration of temperatureindicators installed on boiler , work of repairing, calibration and rewiring of superheated wash water temperature control system , laying of comprehensive cable, installation of thermocouple and commissioning of indicators at the boiler station , work of repairing, rewiring, overhauling and commissioning of d- superheating system of exhaust line , repairing and commissioning work of temperatureindicators of sulfur furnace , laying of compressive cables of sulfur furnace, installation of sensors and commissioning of temperatureindicators , to carry out installation and commissioning work for raw-sulfated juice, clear juice, exhaust steam and injection water inlet temperature , over hauling, rewiring and recommissioning of auto drum water level control system of boilers , rewiring and recommissioning of high or low alarm system on boilers for water level , overhauling, rewiring and recommissioning of boiler steam generation system , overhauling, rewiring and recommissioning of boiler feed water measurement system
Tender For distribution transformer of rating 250 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, the type of tap changer: off-load tap changer for variation of hv voltage from +5% to -10% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part 1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest withcondition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperatureindicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings of appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. suitable cable-end box along with cable entry hole glands is to be provided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is: 1180 (part 1) latest. detailed specification attached as annexure a. [ warranty period: 30 months after the date of delivery ]]
Tender For short term re-tender for the supply and installation of scientific equipments and others sanctioned under pm-usha grants - ft-ir spectrophotometer with atr and ups for analysis of organic samples, digital balance (4 digit), analytical balance, refrigerated centrifuge, layophilizer, gel documentation system/gel analyzer system for dna and protein analysis, uv visiblespectrophotometer, biosafety cabinet, visible spectrophotometer, soil moisture meter (0-100%), ph meter (361), water distillation unit plant (ddu 1500-borosil), wkm micro channel plastic micropipette kit ktn198 (pack of 3), horizontal laminar air flow, auto clave, binocular microscope, centrifuge (remi), electrophoresis unit, vortex_, olympus biological microscope - binocular led (mx 2li), incubator_, ph meter_, laf (4x2x4), microwave oven_, dslr camera, freezer -16 to -25 oc 350 l capacity, water bath (wbp012-borosil), hot air oven type memmert, rotor spinner, spin win (spiunwin mc-01), soxhlet extractor, conductivity meter (308-systronics), vacuum filter, ice maker, muffle furnace_, digital weighing balance (10 mg to 300 g), heating mantle, magnetic stirrer with hot plate_, micropipette set, lab deep freeze, orbital shekar mc-01 (3050), rotary evaporator, slab gel electrophoresis system, submerged electrophoresis system, tlc chamber, power packed electrophoresis, ph meter microcontroller based, colorimeter_, remi5-mlh magnetic stirrer with hotplate, deep freezer (-20oc), mixer grinder for laboratory, gel-rocker (bench rocker), muffle furnace up to 1200 oc, binocular microscope magnus, sterio microscope olympus sz51, hot air oven htlp 45l, tlc plates plastic based silica gel, trans illuminator (hv-it-20), column chromatography chamber, digital multimeter, laser fiber source 30 w, centrifuge machine, uv cabinet with tube, horizontal gel electrophoresis et- h1 for laboratory, hot air convention oven, refrigerator (double door) for laboratory, muffle furnace 1400 oc (18.5l), camera with high resolution for capturing and video, remi laboratory centrifuge -led 6000 rpm (r 8c plus), benchmark accuris uv transilluminator ac/dc input 230v, semi automatic microphone, platform pad, olympus 10x50 s binocular, remi magnetic stirrer-5lts hotplate (5-ml), airconditioners