Latest temperature measurement Tenders | Government temperature measurement Tenders

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45544350

29 Jun, 2026 NA

Sundergarh - Odisha

Tender For corrigendum : tender for tundish working lining, for new caster , tundish backup lining, for new caster , continuous temperature measurement systm

CTN :45669978

06 Jul, 2026 10.59 Lacs

Chhabra - Rajasthan

Tender For requirement of temperature transmitters installed in various areas of turbine, boiler and bop for temperature measurement at 2x660 mw csctpp, chhabra

CTN :45683287

06 Jul, 2026 10.59 Lacs

Jhalawar - Rajasthan

Tender For requirement of temperature transmitters installed in various areas ofturbine, boiler and bop for temperature measurement at 2x660 mwcsctpp, chhabra

CTN :45652628

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For supply of digital thermometer for testing of ac coaches, absolute temperature measurementrange: -40 to 300* c & -40 to 572* f, thermometer type: wired, best accuracy: +/- 2* c & +/-4* f, no of temperature inputs: 1, resolution 0.1 *, dimension: 113x61x13 mm (app), temperature scale: centigrade + fahrenheit, minimum/maximum recordings: yes, the digital thermometer shall be similar or equivalent to model no. dtm902 of aceteq make [ warranty period: 12 months after the date of delivery ] ]

CTN :45645900

30 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For auction sale of rolling stock - allocation no.21213304.on as is where is basis. iron and steel cut-up parts of condemned conventional coach body along with cond. bogies, bearing nos. [1] er/062603, type-wgscz, make-rcf. [2] er/064049, type-gs, make-icf. total qty.-02nos. location-c and w extension yard/kpa. to be sold along with 02 nos. of condemned bogies (per coach) with all available fittings including unserviceable helical springs, 04 nos. unserviceable bio tank & 04 nos. unserviceable aluminium water tank (per coach), 31 nos. unserviceable coach fan which are intact with coach sl-1 & 27 nos. unserviceable coach fan which are intact with coach sl-2, but without excluded fittings. excluded fittings/items are 04 nos. of wheel sets (per coach) with its fittings and nonferrous attachment if any are excluded from sale and will be returned to the custodian as per extent procedure. approx. saleable weights of condemned conventional coaches are included with the un-serviceable items; ferrous-iron, n- ferrous/ other¿s items i.e. un-serviceable aluminium window guide frame & aluminium checker plate-(nil for all coaches), aluminium cable-(approx35.2kg. for coach sl-1 & 35 kg. for sl-2), aluminium watr tank-( approx 220 kg. for each coach), copper from unserviceable fan-(approx 3.2kg for coach sl-1 & 2.8 kg for sl-2), s/s wash basin-(06 nos in 12kg. approx. for each coch), s/s floor-(approx 768kg for each coach), s/s inlay-(approx 80kg. for each coach), s/s bio tank-( approx 492 kg. for ech coach). lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood, unserviceable bogie fittings, helical springs, fans etc. approx. weight of lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood etc. are 1.958 mt for coach sl-1 & 1.875mt for sl-2. condition- [1] after sale, coaches will be handed over to the purchaser for dismantling and cutting at c&w extension yard/kpa. [2] cutting and dismantling of the above coaches are to be made at c&w extension yard/kpa by purchasers own arrangement after ensuring sufficient safety measures against fire hazards. [3] the returnable items of above coaches will be returned to the respective shops of kanchrapara workshop by the purchasers own arrangement before completion of delivery.

State Government

CTN :44944272

01 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : mill outlet temperature measurement thermowells

CTN :45606511

04 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of electronics equipment for ece - supply of electronics equipment for ece, dual output regulated dc variable power supplyas per specifications in annexure-i, function generator as per specifications in annexure-i, dso (digital storage oscilloscope) as per specifications in annexure-i, dc voltmeter analog (0-10) v as per specifications in annexure-i, dc ammeter analog (0-30) ma as per specifications in annexure-i, dc ammeter analog (0-100) ma as per specifications in annexure-i, dc ammeter analog (0-500) ma as per specifications in annexure-i, decade resistance box as per specifications in annexure-i, decade capacitance box as per specifications in annexure-i, decade inductance box as per specifications in annexure-i, strain gauge trainer kit as per specifications in annexure-i, temperature measurement kit as per specifications in annexure-i, ask modulation and demodulation kit as per specifications in annexure-i, dth trainer kit as per specifications in annexure-i, fiber optic communication trainer kit as per specifications in annexure-i, sim reader trainer kit as per specifications in annexure-i, fpga trainer kit as per specifications in annexure-i, fpga / soc development board as per specifications in annexure-i

CTN :45602619

27 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of hole ball large , kong ball , trainer pouch , short leash , control or training harness , electric collar , slithering harness , dog temperature measurement device , dog bite sleeve , laser light , tactical dog harness , tugs , gloves for dog slithering , leash for dog , training clicker

Central Government/Public Sector

CTN :45603868

02 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of temperature measuring gun (recording type)/infrared thermometer with video recording and data logging similar to metravi vit-20. specification attached as annexure a. make/brand: metravi brand model: vit-20, or similar. note: the item is to be used for rolling in and rolling out examination axlebox bearing temperature measurement. [ warranty period: 30 months after the date of delivery ] ]

Temperature Measurement Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector