Latest temperature measurement Tenders | Government temperature measurement Tenders

CTN :45715101

17 Jul, 2026 NA

Sahibganj - Jharkhand

Tender For supply and commissioning of test bench for auxiliary motor, micro processor based. as per following description: [1] supply 440 v ac, 3 phase, [2] measurement, digital display and recording of motor input voltage. [3] measurement, digital display and recording of motor input current. [4] measurement, digital display and recording of kva and kw. [5] measurement, digital display and recording of motor speed. [6] measurement, digital display and recording of motor de and nde temperature. [7] measurement, digital display and recording of resistance. [8] measurement, digital display and recording of inductance. [9] software for downloading and analysis of data. [10] 500 volt insulation resistance meter for measurement and recording of insulation resistance between winding and earth. [11] single phasing and reverse phase protection. [12] earth fault and overvoltage protection. make/brand-sarola or similar [ warranty period: 30 months after the date of delivery ] ]

CTN :45694953

27 Jul, 2026 NA

Multi City - Multi State

Tender For bench top pressure gauge calibrator with accessories- pressure calibration system, maximum no. of pressure module simultaneously, working medium, mode, sensor module range 1, accuracy of sensor module range 1, sensor module range 2, accuracy of sensor module range 2, precision, uncertainty of sensor module range 1, uncertainty of sensor module range 2, measurement modules, control mode, control precision, lowest controllable pressure limit, pressure indication & display system, over pressure protection, leak test & switch test, jog wheel, system mode, valve driver, vacuum pump, contamination prevention system, pressure display units, dc voltage range, dcv resolution, dcv uncertainty, dc current range, dci resolution, dci uncertainty, loop compliance voltage, hart mode, automatic hart detection, hart selectable resistor, write protection, hart commands, remote communication interface hardware, ac power supply, operating temperature range, relative humidity, ingress protection, plumbing lines, fittings and adaptors, warranty, calibration certificatte, test port max. pressure limit, reference port max. pressure limit, vent port max. pressure limit, test port, supply port max pressure limit, liquid or particle filter

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45544350

29 Jun, 2026 NA

Sundergarh - Odisha

Tender For corrigendum : tender for tundish working lining, for new caster , tundish backup lining, for new caster , continuous temperature measurement systm

CTN :45669978

06 Jul, 2026 10.59 Lacs

Chhabra - Rajasthan

Tender For requirement of temperature transmitters installed in various areas of turbine, boiler and bop for temperature measurement at 2x660 mw csctpp, chhabra

CTN :45683287

06 Jul, 2026 10.59 Lacs

Jhalawar - Rajasthan

Tender For requirement of temperature transmitters installed in various areas ofturbine, boiler and bop for temperature measurement at 2x660 mwcsctpp, chhabra

CTN :45652628

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For supply of digital thermometer for testing of ac coaches, absolute temperature measurementrange: -40 to 300* c & -40 to 572* f, thermometer type: wired, best accuracy: +/- 2* c & +/-4* f, no of temperature inputs: 1, resolution 0.1 *, dimension: 113x61x13 mm (app), temperature scale: centigrade + fahrenheit, minimum/maximum recordings: yes, the digital thermometer shall be similar or equivalent to model no. dtm902 of aceteq make [ warranty period: 12 months after the date of delivery ] ]

CTN :45449803

26 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of socket heavy duty no 55 , socket heavy duty no 60 , socket heavy duty no 65 , socket heavy duty no 75 , socket heavy duty no 80 , socket heavy duty no 90 , heavy duty socket set , ring spanner set , de spanner set , bench grinder heavy duty , piston ring compressor , hammer ball pein 500 gram , nose pliers , steel tool box , cir clip pliers internal , cir clip pliers external , insulation tape 10 mtr , brake fluid dot 4 , thread lock liquid , rust cleaner liquid , thread tape , cotton waste , banjo washer 19 no , spring washer size 13 mm , fog light 12v , fog light 24v , radiator cleaner liquid 250 ml , radiator leak repair sealant , o ring set , multi meter digital , battery testing hydrometer , battery tester bct 800 , measurement tape 5 mtr steel , eye and eye round sling 12 ton capacity 4 mtr length , hand grinder gws 600 4 inch cutting wheel , hydraulic jack 10 ton capacity with handle , hydraulic jack 20 ton capacity with handle , hydraulic trolley jack 10 ton capacity , hydraulic trolley jack 20 ton capacity , mechanical jack 20 ton capacity , transmission gear box jack capacity 1500 kg comma mech type , combination pliers 6 by 8 , chisel flat 6 inch , adjustable wrench 12 inch , adjustable wrench 8 inch , pipe wrench 12 inch , pipe wrench 14 inch , pipe wrench 18 inch , pipe wrench 22 inch , pipe wrench 36 inch , valve grinding stick different size , d clamp different size , helmet grease gun 10 kgs , helmet grease gun 20 kgs , torque wrench

State Government

CTN :44944272

01 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : mill outlet temperature measurement thermowells

State Government

CTN :45377341

06 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco-nshes- supply of certain tools and plants material at nshes, nagarjuna sagar.- surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 yes, master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 yes, hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 yes, feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s yes, barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) yes, hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re yes, grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 yes, hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 yes, cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h yes, corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 yes, crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 yes, bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia yes, 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g yes, motorised barrel pump 0.5 hp, 350 watts / single phasein built on- off switchmaximum discharge flow: 60-70 lpm, discharge pressure: 10 m water columnsuitable for 200-210 ltr barrel /50 ltr cansmaterial: stainless steel 316, pump tube length: 1250 mmsuction tube size: 44 mm diasuction tube length: 1250 mm, outlet size: 1 inch dia motorised barrel pump 0.5 hp, 350 watts / single phase in built on- off switch maximum discharge flow: 60-70 lpm, discharge pressure: 10 m water column suitable for 200-210 ltr barrel /50 ltr cans material: stainless steel 316, pump tube length: 1250 mm suction tube size: 44 mm dia suct

Temperature Measurement Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government