Latest terminal post Tenders | Government terminal post Tenders

Corporations/Associations/Others

CTN :45532288

30 Jun, 2026 15.30 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements ,eb board, play materials and name board works in rajagopal nagar park at ward no.51 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page no.105)

Corporations/Associations/Others

CTN :45532318

30 Jun, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page n

Central Government/Public Sector

CTN :45255185

07 Jul, 2026 NA

Mysore - Karnataka

Tender For corrigendum : supply, installation, testing and commissioning of 30 watt led solar street light mounted on6 meter long 75 dia hot dip galvanized iron pole with 150 watt mono crystalline solar pv module mounting on galvanized ms angular frame, galvanized light mounting arm along with lifepo4 (lithium phosphate)battery of 12.8 volts and 36 amp capable of 24 hours redundancy with built-in auto dusk to dawn charge controller with in-built dimming capacity and required cables, hardware and ground fixing j bolts. the light colour is white and delivered lumen output is 3150 lumens. warranty: led light: 5 years, solar pv module: 25 years as per manufacturer?s warranty conditions, 3 years for lifepo4 battery as per manufacturer warranty and as per detailed specifications complete.. (detailed specification attached). ]

Central Government/Public Sector

CTN :45555774

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45549978

13 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For mpcb for water pump 1 & 2 with auxiliary contact (1no+1nc) and terminal block db, rated current:1- 1.6 amp, thermal release range: 1-1.6a, rated voltage: 690 v, class-10, breaking capacity 50 ka, pole-3p, cat no. ms116-1.6, hk1-11 of abb or gv2-me06+gvae11 of schneider or 3rv20111aa10 +3rv2901-1e of siemens or st41894oooo+st41945oooo of l&t make. make- as per modification sheet no.rdso/pe/ms/tl/0090-2023 (rev-0) of lhb non ac coach.abb,schneider, siemens & l&t only. oem proof of purchase, warranty and test certificate submitted at the time of supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45332724

22 Jun, 2026 5.37 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : supply of supply of 3 tr non inverter ductable ac as per bsnl specifications , itc of 3 tr non inverter ductable ac as per bsnl specifications , supply and fixing copper piping of 0.75 inch with nitrite foam insulation as required , supply and fixing copper piping of 0.625 inch with nitrite foam insulation as required , supply and laying 4 core 4 sq mm pvc insulated copper cable as required. , supply and laying 4 core 2.5 sq mm pvc insulated copper cable as required. , supply and fixing 1 inch dia pvc pipe for water drainage as required , s fixing ms structure of suitable size as required , making covering of extra oper space of leakge as required , supply and fixing 8way double door 4 and 24 nos tpn mcb db , supply and fixing 5a to 32 a tpn c curve mcb in extg db as required , supply and fixing 60a four pole isolator in extg db as required , supply and fixing single ploe blanking plates , supply and fixing 8 swg gi wire for loop earthing as required , supply and fixing 150mm x 50mm x 1.5mm perforated ms cable tray

corporations/Associations/Others

CTN :45525894

20 Jun, 2026 2.49 Lacs

Parganas - West Bengal

Tender For installation of insulating materials on the street light poles at different places in ward no 111 under br-xi - building works(m) drain, down pipes, chimney etc?.(c). additional rate?(21)supplying, fitting & fixing upvc pipes a- type and fittings conforming to is:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete.a) upvc pipes: (iii) 160 mm. dia., a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 158. 40x6mm thick ms clamp on pole upto 100mm dia, a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 194. 6mm dia rag bolt with nut, sub total, gst 18%, cess 1%

Central Government/Public Sector

CTN :45303050

20 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of electrical fitting and fixures - upvc 4 way junction box 1 inch thickness is to 2 mm make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro or indoasian elvira , 185 sq mm straight aluminium lugs heavy duty lugs or any reputed brand , 300 sq mm straight aluminium lugs heavy duty lugs or any reputed brand , 70 sq mm tubular terminal copper lugs heavy duty lugs or any reputed brand , single phase preventor 415 vac make easun or ge or abb or schneider or siemens or cg , 300 mm ms cable tray 14 swg powder coated performated type of any reputed brand size 300mm x 50 mm standard size 2 point 5 mm or more make maa industries mumbai or profab of indiana or essar or protec or akg or pai fab or classic engineering solutions or fixotech engineering systems or innospacer engineer technologies , 100 x 100 x 65 mm pvc box make heavy duty lugs or any reputed brand , mccb 630 amps 50 ka make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , mccb 400 amps 50 ka make schneider or abb or siemens or hager or legrand l and t or indoasian or optipro , mccb 250 amps 50 ka make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , mccb 125 amps 50 ka make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , on load 4 pole change over 63 a make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , on load change over 250 a switch , 300 sq mm gland 63 mm heavy duty lugs or any reputed brand , 185 sq mm gland 50 mm heavy duty lugs or any reputed brand , a c box with 20 amps socket socket with sheet steel enclosure plug and mcb make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , 10a switch modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 16a switch modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 6a modular socket make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 16a socket modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , fan regulator socket type 400w modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 2 modular pvc box with plate make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 3 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 4 modular pvc box with plate make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 6 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 8 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 12 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 2 pole mcb c 10 a schneider or abb or siemens or hager or legrand or l and t or indoasian optipro , 2 pole mcb c 40 a schneider or abb or siemens or hager or legrand or l and t indoasian optipro

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45415159

17 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

Terminal Post Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors