Latest thermal paint Tenders | Government thermal paint Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

corporations/Associations/Others

CTN :45285961

26 May, 2026 7.59 Lacs

Nellore - Andhra Pradesh

Tender For supply and delivery & fixing of electrical items and o&m of water supply as part of summer action plan for 18mld ss tank kohturu of nellore municipal corporation - 1 s.q mm copper wire coil( finolex) mat-02748 , 100 hp motor terminal plate , 100 mm cl earth pipes 2.5 mtrs long , 16 ams ss command , 20w led tube light set (crompton make) , 300 mm x 600 mm rubber mats for pannel boards , 33 kv electrical rubber protection gloves for hands , 4" ms bore clamp set , 5 ton chain block 10 mtrs (vital make) , bosch 50 ti x line tin coated set /drill bits , chemical earth pits , engaging of jcb on hire basis including cost and conveyance charges etc., complete , finolex 2.5 sqmm 4 core round copper wire 100 mtr , gi earth strip , insulation tape role , l/t 63 ams 3 pole isolater , l/t mn2 therminal overload relay (13 to 23 ams)40 contactor , l/t mnx 40 contactor , max hydralic 46 grade oil 26 ltrs , ms flat bar 10mm x 60mm , pannel board locks and keys , plantex secura 6 step alluminium ladder , providing welding work to kondlapudi raw water pumphouse maingate including cost and conveyance etc., complete , providing, laying, spreading and compacting graded hbg crushed stone aggregate to wet mix macadam specification including cost, seignorage of all materials and including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to achieve the desired density etc., as directed by the engineer-in-charge and as per mort&h specification.406 (4th revision) for finished item of work , supply and erection of color gi sheets of sabrand jindal 0.5mm thick tct ppgl az-70 550mpa isi 5965 - 2012 for roofing including all the necessary bolting fixing arrangement, joint plate, edge cover, ridge etc complete and as directed by the site engineer , supply and transportation of following items 60w led street light (crompton make) , taparia ring flat spaner set , taparia s-15 hxl 1/2 dr socket set 24 pees , themisto th-m90 auto range clam meter , waco hand driven genarater type insulation 5000 volts 5-10000 ohms-meggar

State Government

CTN :45301637

01 Jun, 2026 35.00 Lacs

Jodhpur - Rajasthan

Tender For purchasing of statationary and related items for jda jodhpur office on annual contract 2026-27 - calculator big size 12 digits casio dj 120d, file pad "4" (medium) lugnet, file pad with cloth strip on all four sides, dak pad (superior), attendance register (120 pages) large, file cover with less card sheet with printing, file tag 8", file less (924 no.) shivhari, box file lodha kangaroo clip, bill register (50 pages), outward register (400 pages), inward register (400 pages), moment register (400 pages), ruled register 70 sheets 17x27/4 ledger paper 96 pages, ruled register 70 sheets 17x27/4 ledger paper 144 pages, ruled register 70 sheets 17x27/4 ledger paper 192 pages, ruled register 70 sheets 17x27/4 ledger paper 288 pages, ruled register 70 sheets 17x27/4 ledger paper 384 pages, stock register 600 pages leather binding, stock register 500 pages leather binding, stock register 300 pages leather binding, stock register 200 pages leather binding, spiral slip pad with cover multi color printing and inner page single color printing of 100 papers 18x22x4, spiral diary with cover multi color printing and inner page single color printing of 50 papers 18x22x4, spiral slip pad with cover multi color printing and inner page single color printing of 100 papers 18x22x8, spiral diary with cover multi color printing and inner page single color printing of 50 papers 18x22x8, spiral diary neelgagan mix color 100 paper keys 18x22x8, spiral diary neelgagan mix color 100 paper keys 18x22x4, driver log book (small) (200 pages), driver log book (large) (200 pages), pen (uniball), pen (cello, butterfly,flair, linc or equivalent), pen (use and throw) (doms, saino softek, reynods or equivalent), pen v-5 pilot, white board marker pen (camlin, cello, luxor or equivalent), oil paint marker pen (camlin, cello, luxor or equivalent), hb pencil (apsara, nataraja, doms or equivalent), eraser dust free (apsara, nataraja, doms or equivalent), sharpener (apsara, nataraja, doms or equivalent), cd markar pen (camlin, cello, luxor or equivalent), carbon paper sapphire ( camlin, kores or equivalent), white board (rate per foot), pen tumbler (leather coated), sketch pen set 12 colors large size, whitener pen 7 ml (camlin, cello, luxor or equivalent), highlighter pen (camlin, cello, luxor, faber castell or equivalent), stamp-paid ink (ashoka 30 ml), glue stick (15 grams) (pidilite, kores or equivalent), fevicol tube 100 grams, rubber stamp, self-ink rubber stamp (sun stamp), envelopes legal size laminated inside, envelopes a-4 size laminated inside, white window envelope(9x4), white sun envelope 100 no. (9x4), sticky notes 5 color (3x3) inch, sticky color flag (3x3 inch ), double side tape, cello tape (1") (65 m), cello tape (3") (65 m), cello tape (2") (65 m), colored tape (2") (65 m), brown tape (3") (65 cm), brown tape (2") (65 cm), tape dispenser large, paper cutter (big size), poker (wooden handle), pin cushion plastic (superior quality), pin packet t- shape ( 100g), u-pin/clip 33 mm (steel-100 pics), plastic scale (15 cm) (camlin, nataraja, doms or equivalent), steel scale (30 cm) (camlin, nataraja, doms ), stapler machine no. 10d, staples pin no. 10/1m, stapler machine no. 24/6 hp 45, staples pin no. 24/6, punching machine dp 600, punching machine heavy duty double hole, damper sponge pad, stapler remover sr - 300, glass paper weight, stamp-pad medium size (camlin, faber-castell ,kores or equivalent), stamp-pad large size (camlin, faber-castell ,kores or equivalent), glue bottle (150 ml ), glue bottle (300 ml ), paper binder clip 32 mm, paper binder 25 mm, paper binder 41 mm, color photo copy paper ream a4 80 gsm (superior quality), photo copy paper ream a4 size 80 gsm (superior quality), photo copy paper ream legal size 80 gsm (superior quality), photo copy paper ream a3 size 80 gsm (superior quality), small slip book small with multicolor cover printing 18x22/8, plastic folders button (premium quality), l folders (premium quality), strip file (premium qua

CTN :45068566

05 Jun, 2026 40.00 Lacs

Barwaha - Madhya Pradesh

Tender For supply of various construction-related materials - items : rates inclusive of all kind of levies , royalties, taxes, payables, handling charges, hammali or other duesnothing extra would be paid by council, only gst would be paid extra, 20 mm crasher gitti(rate per cum), 40 mm crasher gitti(rate per cum), 45 mm to 90 mm gitti (rate per cum), 63 mm to 45 mm gitti(rate per cum), badoda green marble (rate per sqft.), binding wire (rate per kg), black cotton soil( rate per cum), boulder (63mm)( rate per cum), brush 2 inch(rate per unit ), brush 3 inch(rate per unit ), brush 4 inch(rate per unit ), cement opc 53 grade(rate per bag), cement ppc 43 grade(rate per bag), chuna powder(rate per kg), churi crusher 6 mm (rate per cum), crushed metal 20mm( rate per cum), crushed metal 6mm( rate per cum), distemper exterior(rate per ltr), distemper interior (rate per ltr), female urinal pot (rate per unit ), fly ash bricks ( 19 x 19 x 9)(rate per unit ), granite ( high quality)(rate per sqft.), guthka bricks( rate per nos), hard moorum( rate per cum), hume pipe np3 100 mm(rate per rm ), hume pipe np3 1000 mm(rate per rm ), hume pipe np3 1200 mm(rate per rm ), hume pipe np3 125 mm(rate per rm ), hume pipe np3 1400 mm(rate per rm ), hume pipe np3 150 mm(rate per rm ), hume pipe np3 300 mm(rate per rm ), hume pipe np3 350 mm(rate per rm ), hume pipe np3 400 mm(rate per rm ), hume pipe np3 450 mm(rate per rm ), hume pipe np3 500 mm(rate per rm ), hume pipe np3 600 mm(rate per rm ), hume pipe np3 700 mm(rate per rm ), hume pipe np3 800 mm(rate per rm ), hume pipe np3 900 mm(rate per rm ), indian w.c. sheet ( 575 x 440 x 250 )(rate per unit ), kali sand ( ret ) (rate per cum), kali chuna( rate per kg), kali mitti(rate per cum), kota stone (rate per sqft.), m.s. steel bar 10 mm(rate per kg), m.s. steel bar 12 mm(rate per kg), m.s. steel bar 16 mm(rate per kg), m.s. steel bar 8 mm(rate per kg), male urinal 430x260x350mm(rate per unit, marble powder( rate per kg), masonry stone( rate per cum), mitti /malba transportation i/c labour diesel ,driver charge( rate per trolly), narmada sand( rate per cum), oil distember( rate per kg), oil paint ( interior)(rate per ltr), oil paint ( texture ) asians or similar company(rate per ltr), oil paint asian( rate per ltr), oil paint exterior(rate per ltr), open bhatta bricks ( 19 x 19 x 9)(rate per unit ), paver block(rate per sqft.), pipe for wash basin(rate per unit ), plastic paint (rate per ltr), plastic paint asian( rate per ltr), precast r.c.c. pole (rate per unit ), pvc bend 160 mm dia ( rate per nos), pvc bend 200 mm dia( rate per nos), pvc bend 50 mm dia ( rate per nos), pvc bend 90 mm dia( rate per nos), pvc pipe @8kg/cm2 160 mm dia ( rate per m), pvc pipe @8kg/cm2 200 mm dia( rate per m), pvc pipe @8kg/cm2 250 m dia( rate per m), pvc pipe @8kg/cm2 315 mm dia( rate per m), pvc pipe @8kg/cm2 50 mm dia ( rate per m), pvc pipe @8kg/cm2 90 mm dia( rate per m), pvc tee @8kg/cm2 160 mm dia ( rate per nos), pvc tee @8kg/cm2 200 mm dia( rate per nos), pvc tee @8kg/cm2 50 mm dia ( rate per nos), pvc tee @8kg/cm2 90 mm dia( rate per nos), pvc -u pipe 110 mm dia ( rate per m), pvc -u pipe 160 mm dia( rate per m), pvc -u pipe 200 mm dia ( rate per m), pvc -u pipe 250 mm dia( rate per m), r.c.c. 3 seater color bench(rate per unit ), r.c.c. 3 seater garden bench(rate per unit ), r.c.c. pipe 300 mm dia np3( rate per m), r.c.c. pipe 450 mm dia np3( rate per m), red sand stone 1.5" thick( rate per sq ft), red sand stone 3" thick( rate per sq ft), red stone (rate per sqft.), soft moorum(rate per cum), static roller 8-10 mt with driver & diesel ( rate per hour ), stone dust( rate per cum), syntax tank (rate per ltr ), tarpin (rate per ltr), tor steel( rate per kg), tractor trolly,tractor with diesel and driver kiraye se( rate per hour ), vetrified floor tiles (rate per sqft.), w.c. sheet 21 inch(rate per unit ), wall tiles (rate per sqft.), wash basin 630x460(rate per unit ), western w.c. sheet ( 580 x 360 x 395)(rate pe

CTN :45143998

01 Jun, 2026 NA

Nadia - West Bengal

Tender For corrigendum : supply of electrical materials day to day maintenance in different places under bckv, mohanpur, nadia - 20 watts led battenmodel no. 31423pin : 20 w, lin : 0.10 a, 240 v - 50 hzp.f. : 0.9, ip : 20, cct: 6500 k, ta : 35 degree cmake philipsormodel number : d532065power consumption: 20 wshape: straight linearlength: 115 cmmodel name : 20w 4 feet batten 6500k (cool day)color : whitematerial : polycarbonatemake - wipro or model number : led20wbt-grs65kpro_pk-2model name : grace procolor : whitetype : ledmaterial : polycarbonateshape : straight linearholder : t5 1/2base : b15dmake - orient, 1200 mm sweep a.c. ceiling fan, cupper winding including double ball bearing (brand approved by eic) model - striker, colour - brownmake - ushaormodel - sure breezesea, colour - brownmake - crompton gravesorblade - three blade, volt - 230 v. a.c., frequency - 50 hz, corrosion resistance powder coated blades, colour brown, bee star rated energy efficient ceiling fan, rust free coating for long lifemake bajaj, model - frore, 9 mtrs. insulating tape (pvc), tape width - 18 mm, backing material - pvc- polyvnyl chloride (brand approved by eic)make - anchoreormake - steel gripormake - deon, 400 watts metal halide ballast (brand approved by eic)ballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 50 hz +/-5% (make - philips)orballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 60 hz +/-5%, power factor >0.9 (make - crompton)orballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 50hz +/-5%, circuit type - cwa (make - bajaj), 400 watts 2 pole ingitor (brand approved by eic)model - hpi (-t), 250-400 w s/51/02 ignitor (make - philips)ormodel - ign112s/mh 400 w, power rating 301-400 w (make - crompton)orpower - 400 watts, voltage- 240 v, frequency - 50/60 hz, product name - sn 58/02 (make - bajaj), 400 watts metal halide lamp (brand approved by eic)model - hpit400du - ph; lighting colour - cool white, length - 286 mm; bulb type - t46; diameter - 47 mm, life - 20000 hours (make - philips)orvoltage - 109, power factor >0.85 v, operating current - 438 ma (make - crompton graves)orvoltage - 220-240 v, wattages - 400 watts, colour temperature (kelvin) - 4000 k, cool white, initial lumen - 36000 lm, mean lumen - 24000 lm, cat no. mh 400, lighting technology - metal halide (make - bajaj), 12 watts led bulb (brand approved by eic)light output - 900 lumens; power factor - >0.9 (make - philips)orlight output - 1260 lumens; power factor - >0.9, life 25000 hr. (make - crompton)orbulb colour - white, wattage - 12 watt, lumen - 1400 lm. (make - bajaj), 2.5 mfd. capacitor (brand approved by eic)voltage - 230 volt, frequency - 50 hz, model - tip2.50 mfd, 1200 mm - sweep ac ceiling fan, non pcb oil filled (make - tibcon)orvoltage - 220-230 v, frequency - 50 hz (make - crompton greeves)orvoltage - 220-230 v, frequency - 50-60 hz (make - keltron), fan bearing (brand approved by eic)bearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - skf)orbearing no. 6201-2rs, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - fag)orbearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - tata), fan bearing (brand approved by eic)bearing no. 6202, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - skf)orbearing no. 6201-2rs, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - fag)orbearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - tata), 0.75 sq.mm. cu. wire (brand approved by eic)type unsheathed industrial wire; volt 1100 vmake finolexortype unsheathed industrial wire; volt 1100 v, brand - polycab etira, length - 90 mtrs., weight - 1.2 kg., conductor materials - cupper, current capacity - 14 watt, energy - 3.25 kw at

CTN :45136175

25 May, 2026 50.00 Lacs

Sanawad - Madhya Pradesh

Tender For supply of various construction-related materials - items : rates inclusive of all kind of levies , royalties, taxes, payables, handling charges, hammali or other duesnothing extra would be paid by council, only gst would be paid extra, 20 mm crasher gitti(rate per cum), 40 mm crasher gitti(rate per cum), 45 mm to 90 mm gitti (rate per cum), 63 mm to 45 mm gitti(rate per cum), all steel work chamber plate steel,railing, divider etc.( rate per kg), badoda green marble (rate per sqft.), binding wire (rate per kg), black cotton soil( rate per cum), boulder (63mm)( rate per cum), brush 2 inch(rate per unit ), brush 3 inch(rate per unit ), brush 4 inch(rate per unit ), cement opc 53 grade(rate per bag), cement ppc 43 grade(rate per bag), chuna powder(rate per kg), churi crusher 6 mm (rate per cum), crushed metal 20mm( rate per cum), crushed metal 6mm( rate per cum), distemper exterior(rate per ltr), distemper interior (rate per ltr), female urinal pot (rate per unit ), fly ash bricks ( 19 x 19 x 9)(rate per unit ), granite ( high quality)(rate per sqft.), guthka bricks( rate per nos), hard moorum( rate per cum), hume pipe np3 100 mm(rate per rm ), hume pipe np3 1000 mm(rate per rm ), hume pipe np3 1200 mm(rate per rm ), hume pipe np3 125 mm(rate per rm ), hume pipe np3 1400 mm(rate per rm ), hume pipe np3 150 mm(rate per rm ), hume pipe np3 300 mm(rate per rm ), hume pipe np3 350 mm(rate per rm ), hume pipe np3 400 mm(rate per rm ), hume pipe np3 450 mm(rate per rm ), hume pipe np3 500 mm(rate per rm ), hume pipe np3 600 mm(rate per rm ), hume pipe np3 700 mm(rate per rm ), hume pipe np3 800 mm(rate per rm ), hume pipe np3 900 mm(rate per rm ), indian w.c. sheet ( 575 x 440 x 250 )(rate per unit ), kali sand ( ret ) (rate per cum), kali chuna( rate per kg), kali mitti(rate per cum), kota stone (rate per sqft.), m.s. steel bar 10 mm(rate per kg), m.s. steel bar 12 mm(rate per kg), m.s. steel bar 16 mm(rate per kg), m.s. steel bar 8 mm(rate per kg), male urinal 430x260x350mm(rate per unit, marble powder( rate per kg), masonry stone( rate per cum), mitti /malba transportation i/c labour diesel ,driver charge( rate per trolly), narmada sand( rate per cum), oil distember( rate per kg), oil paint ( interior)(rate per ltr), oil paint ( texture ) asians or similar company(rate per ltr), oil paint asian( rate per ltr), oil paint exterior(rate per ltr), open bhatta bricks ( 19 x 19 x 9)(rate per unit ), paver block(rate per sqft.), pipe for wash basin(rate per unit ), plastic paint (rate per ltr), plastic paint asian( rate per ltr), precast r.c.c. pole (rate per unit ), pvc bend 160 mm dia ( rate per nos), pvc bend 200 mm dia( rate per nos), pvc bend 50 mm dia ( rate per nos), pvc bend 90 mm dia( rate per nos), pvc pipe @8kg/cm2 160 mm dia ( rate per m), pvc pipe @8kg/cm2 200 mm dia( rate per m), pvc pipe @8kg/cm2 250 m dia( rate per m), pvc pipe @8kg/cm2 315 mm dia( rate per m), pvc pipe @8kg/cm2 50 mm dia ( rate per m), pvc pipe @8kg/cm2 90 mm dia( rate per m), pvc tee @8kg/cm2 160 mm dia ( rate per nos), pvc tee @8kg/cm2 200 mm dia( rate per nos), pvc tee @8kg/cm2 50 mm dia ( rate per nos), pvc tee @8kg/cm2 90 mm dia( rate per nos), pvc -u pipe 110 mm dia ( rate per m), pvc -u pipe 160 mm dia( rate per m), pvc -u pipe 200 mm dia ( rate per m), pvc -u pipe 250 mm dia( rate per m), r.c.c. 3 seater color bench(rate per unit ), r.c.c. 3 seater garden bench(rate per unit ), r.c.c. pipe 300 mm dia np3( rate per m), r.c.c. pipe 450 mm dia np3( rate per m), red sand stone 1.5" thick( rate per sq ft), red sand stone 3" thick( rate per sq ft), red stone (rate per sqft.), soft moorum(rate per cum), static roller 8-10 mt with driver & diesel ( rate per hour ), stone dust( rate per cum), syntax tank (rate per ltr ), tarpin (rate per ltr), tor steel( rate per kg), tractor trolly,tractor with diesel and driver kiraye se( rate per hour ), vetrified floor tiles (rate per sqft.), w.c. sheet 21 inch(rate per unit ), wall tiles (rate per sqft.), wash basi

CTN :45157163

08 Jun, 2026 30.00 Lacs

Jhabua - Madhya Pradesh

Tender For supply of pwd material others as per list for financial year 2026-27 - financial rates per unit for the financial year 2026-27: sand, gravel (10 mm), stone chips (6 mm), gravel (20 mm), gravel (40 mm), isi-grade cement (major brands), black sand, hard murram, banda, black soil, brown soil, corrugated sheets, coated sheets, iron reinforcement bars (6 mm isi), iron bars (8 mm), iron bars (10 mm), iron bars (12 mm), iron bars (16 mm), iron flat bars, wire mesh, lime wash, ochre wash, asian distemper, asian oil paint, bricks (class 1, 2, 4), cement sheets, ready-mix asphalt, turpentine, clay bricks, jcb machine, poclain machine, centering materials (rental), vibrator (rental), concrete mixer, lorry/truck, white cement, formwork, tiles, marble stone, 9-inch bricks, 12-inch bricks, 18-inch bricks, [pipe sizes] 1/2", 1", 3/2", 3/4", 2", 3", 4", pop (plaster of paris), granite, water tanker (3000 liters), water tanker (4000 liters), water tanker (6000 liters).,hume pipe np2 -100 mm, hume pipe np3-100 mm, hume pipe np4-100 mm, hume pipe np2-125 mm, hume pipe np3 np4-125 mm, hume pipe np4-125 mm, hume pipe np2 -150 mm, hume pipe np3 -150 mm, hume pipe np4-150 mm, hume pipe np2-300 mm, hume pipe np3 -300 mm, hume pipe np4-300 mm, hume pipe np2 -350 mm, hume pipe np3 -350 mm, hume pipe np4-350 mm, hume pipe np2 -400 mm, hume pipe np3 -400 mm, hume pipe np4-400 mm, hume pipe np2 -450 mm, hume pipe np3 -450 mm, hume pipe np4-450 mm, hume pipe np2 -500 mm, hume pipe np3-500 mm, hume pipe np4-500 mm, hume pipe np2-600 mm, hume pipe np3 -600 mm, hume pipe np4-600 mm, hume pipe np2-900 mm, hume pipe np3 -900 mm, hume pipe np4-900 mm, hume pipe np2 -1000 mm, hume pipe np3 -1000 mm, hume pipe np4-1000 mm, hume pipe np2-1200 mm, hume pipe np3 -1200 mm, hume pipe np4 -1200 mm, hume pipe np2-1400 mm, hume pipe np3 -1400 mm, hume pipe np4 -1400 mm, rcc 3 seater color cement bench, rcc 3 seater garden bench, multicolor wall painting work with primer & scrapping comlete as directed by eng. encharge, multicolor wall writing work, multicolor wall art work 3d/graphity/realistic with primer & scrapping comlete as directed by eng. encharge, multicolor wall art work traditional with primer & scrapping comlete as directed by eng. encharge, hige altittude wall painting work, murals 2d with material,painting and fixation as directed by eng. encharge, murals 3d with material,painting and fixation as directed by eng. encharge

CTN :45063622

30 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of 25vkoc005 c c - joint , main bolts , inner star , gfl bolts , gfl washer , clamping collar , clamp , valve for water pump , bush , fresh water cooler relience make , spare part kit for fw/sw heat exchanger , starting air conn.inlet , engine inlet pressure connection , governor speed setting air inlet connection , rack position limiter , fuel rack indicator , pressure transmitter p5r-4bar-4-20-1/2-pe , pitch indicator 0-20ma , pl96 , relay 4no-nc 24v dc , solenoid valve (nomo-24 vdc) , cd3 cable (5mm) , safeties reset push button , emerg. stop push button , scanner thermocouple pcb , display pcb , press.sw. (item no.17 of engraved ckt) , pressure regulator , pneu p.b. pneu return red , pneu. switch , s w engine driven pump assembly , stud m12 40 30n j12 nse1 181 , oring an7 31b6 , o ring 151i d 3d nse6.531 21a7 , filtering unit , viton oil seal 15x30x10 , fuel filter element , protect cyl head tie rod , injector body extractor , inj.pump and pump head extractor , flexible hoses , high pressure hand pump , bearing unit , bush sealing , bolt-connecting rod , o ring , thrust -stopper , top spring collar (bar) , bottom spring collar , dunb bushes 25-25 du , shaft , seal bearing housing , coupling pin , sealing joint , bs ring , type c30 , nse 6.51 , 20 , paper insert , o ring , needle roller bearing , rucompensation probe for exh. pyrometric duct , hydraulic jack for cylinder head , tool valve guide extractor , tool cylinder head test pressure , flex hose for hydraulic tool , high pressure hand pump , tee connection , safety valve , water pump impeller , scraper ring , round gasket , flexible hose for air , spare gauge glass 583 , sealing bush , piston ring , safety ring for abb vtr251-2p t/c , gfl washer , pressure switch(p 16 bars) , pressure switch(p 19 bars) , normal stop electro distributor , circuit selector , tt-314 sensor for main engine fresh water temperature , 25 pin sub d female connector , pressure gauge forbes marsh 100ss , ss316 0-4 bar glyf fil , pressure gauge forbes marsh ss316 0-40 bar glyf fil , pressure switch for s/by pp (range 0-4 bar) , pneumatic distributor pneu/pneu , sph card (sph) , lub oil pressure safety , pressure switch-1 to 10 bar , bearings individual alarm card (aip) , convertor module t454 t456 lub oil temp , svae - over speed cards , engine speed indicator 0-1250 rpm 96x96 , cock with filter , distributor iso 541 pneumatic spring , distributor iso 541 pneumatic/spring , iso1 distributor pneu.control/pneu.return , switch 3 pos. (1tc , auto , 2tc) , engine control unit (ecu) , gasket , fuel pipe m14xm14b , parallel , 750l , 9.0 i.d. , sae 100 r6 , booster servo motors with connectors , meta flex gasket , meta flex gasket , meta flex gasket , fuse 0.5a , link cable pc/tsx plc length -3mtr , oil pressure security card (sphem) , speed raise lower actuator 2no contacts , touch screen color display unit , 3 position switch , fuel pipe(return) m12x1.5 male plugxm14 x1.5 banjo(700mm) , universal crimping tool , oil mist detector , time delay relay (off delay) , pyrometric duct bank a

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

State Government

CTN :45158944

26 May, 2026 10.00 Lacs

Narsinghpur - Madhya Pradesh

Tender For supply of powerloom silai bunai samgri central jail narsinghpur - plastic nalls / pickers , comb size 36 no. length (72 inches), , leather belt, , greece, , mobil oil, , lylon rope, , elastic rope, , 5th belt (as per size), , 1/10 s yarn in cone (white colour), , 2/20 s yarn in cone (white colour), , ranipal, , color fixer, , oil can, , shuttle 15", 16", , nuts and bolts (various types), , tar bharani souza (in a still), , kill spring, , gate spring,

Thermal Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government