Latest thermoplastic polyurethane Tenders | Government thermoplastic polyurethane Tenders

CTN :40540705

27 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.

Central Government And Public Sector

CTN :40477641

17 Jun, 2025 NA

Angul - Odisha

Tender For supply of thermoplastic polyurethane tube and fittings - hose polyamid pa 42 5-n , hose polyamid pa 4 2 5 b , hose polyurathene pu-6 4-n , hose polyurathene pu- 6 4-b , hose polyurathene pu-8 6-b , male ty.push-in fitt.ty qs-14-6 , push in male st contr 8mm od tube,1 8bsp , push in male elbow 8mm od tube,1 8bsp , push in male t-branch 8mm od tube 1 8bsp , push in male st contr 4mm od tube, m5 , push in male elbow 4mm od tube, m5 , push in male tee branch,tube od6mm, thr , push in male y,od 8mm.1 4in.bsp , push in male stud,od 8mm,1 4in.bsp , push in male elbow 6mm od tube,1 4 bsp , push in male st conntr 6mmod tube,1 8 bs , push in male elbow 6mmod tube,1 8 bsp , push in male branch 6mmod tube,1 8 bsp , pu tube,id 10mm,od 14mm , push in male st contr 14mmod tube,1 2bsp , push in male st contr 14mmod tube,3 8bsp , push in male st contr 14mmod tube,1 4bsp , push in male elbow 14mm od tube,1 2 bsp , push in male elbow 14mm od tube,3 8 bsp , push in male elbow 14mm od tube,1 4bsp , push in male branch 14 mmod tube,1 2 bsp , push in male branch 14mmod tube,3 8 bsp , push in male branch 14mm od tube,1 4 bsp

Central Government And Public Sector

CTN :40503404

06 Jun, 2025 NA

Bongaigaon - Assam

Tender For supply of tpu (thermoplastic polyurethane) rain coat with rain cap multipurpose. size: l, xl , xxl. make-kitmax, duckback, zeel, wildcraft. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40434983

23 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of thermoplastic polyurethane spring pads (happy pads) for wag5 locos rdso specificati on no. mp-0.40.99.01 (rev.-03)august, "2017 and conforming to rdso drawing no.skvl-323 alt 1. [ warranty period: 30 months after the date of delivery ]

CTN :40427134

11 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of furniture -the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 50cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. it shall have center tilt synchro mechanism, 360 degree revolvingtype, 3 position locking system with anti-shock feature. the headrest is injection moulded in glass filled polypropylenewhich is upholstered with foam and fabric. the pneumatic height adjustment is chrome plated with an adjustmentstroke of 9cm. the pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors.the pedestal is 65cm pcd. the overall dimension of the chair shall be 75cm x 75cm x (115-130cm). seat height shall be44.5cm to 53.5cm.this shall come with sliding seat, which helps user adjusting the seat depth as per the user size andneeds. the product shall be certified with the following: cii greenpro, ul greenguard, scs indoor advantagegold, bifma level 2. the work shall be done strictly as per drawing and direction of engineer-in-charge , the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 550cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. the chrome plated tubular frame is made of dia. 2.8cm x 0.2cmthick ms round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. theoverall dimensions of the frame shall be 63.5cm x 59.5cm x 97.5cm. the seat height shall be 42.5cm. the product shallbe certified with the following: cii greenpro, ul greenguard, scs indoor advantage gold, bifma level 2. thefurniture quotation for ae & je civil - hindan airforcefor assistant engineer room:2work shall be done strictly as per drawing and direction of engineer-in-charge. , providing and placing in positionmain table with side table. overall size shall be 2350mm(l) x 1200mm(d) x 750mm(h) with sidetable of size 1250mm(l) x 500mm(d) x 750mm(h). the main table and side table tops are made of 25mm thick mdf with bottomside pre-laminate board confirming to is-14587:1998 and 0.4mm pvc membrane pressed on to top. soft closing access flap withinbuild power box are provided on work surface for wire management. the modesty panel is made of 25mm thick mdf - one side prelaminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. the understructure is made of 25mmthick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mmthick pvc lipping. the drawer unit is made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirmingto is-12823:1990, edge banded with matching 2mm thick pvc lipping. drawer units - drawer fronts made of 25mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pv

Central Government/Public Sector

CTN :40434732

14 Jun, 2025 40.00 Lacs

Kishangarh - Rajasthan

Tender For supply of lab furniture of central instrumentation facility, central university of rajasthan - wall mount cabinets with metal door, sefa-8 standards heavy duty wall mount cabinets: sefa-8 standards heavy duty cabinet body shall be in 1.2mm thick material of construction: 1.2 mm gi sheet with ss 304 hinges and handles. epoxy powder coating of 60 -80 microns. - size - 600mmlx450mmdx750mmh. provison of lock is required. these units will be fitted in the service areas of the drawing., under bench storage units (qty as per drawing)sefa-8 standards heavy duty under cabinets & drawers: sefa-8 standards heavy duty under module (cabinet body shall be in 1.2mm thick and drawer front & shutter shall be in 1 mm thick), the cabinet should have adjustable height shelf. the storage cabinets should be made of crca 20 gauge. (tata/ jindal/sail/jsw in panel construction. cabinets should have sandwitched doors & drawers filled with pcapsal sheet should be lined on the edges of doors and drawers for sound deadning. the cabinets should be interconnected with spacer which strengthens over all structure of the table / bench. ss fasteners should be used at exposed area inside the cabinets.. the drawer glides should be telescopic glides which gives strength with smooth movebase cabinet of 600 mm with 1 drawer & 2 shutter with lockbase cabinet 750mm with 1 drawer & 2 shutter with lockbase cabinet 900w 1 drawer & 1 shutter with lockbase cabinet 450mm 1 drawer & 1 shutter with lock, modular sink unit ( corner unit )specification of material of construction is same as under cabinets. the front panel should have single door with handle. sink bowl and bottle trap should be of polypropylene. one way ss faucet., filler panels (qty as per drawing)specification of material of construction is same as under cabinets., frame assembly for wall cabinet bench (qty as per drawing)material:steel tubing, of hollow sections conforming to standards is code:square pipe with a cross-section of 30mm x 30mm and a minimum thickness of 1.2 to1,6 mm. finish: powder coating: highly corrosion-resistant epoxy powder coating, typically 60-80 microns thick,, with pre-treatment for better adhesion. .legs:adjustable levelling feet: required for uneven flooring, typically with a tolerance of -5mm to +20mm., 17mm (+/-1) thick black granite (qty as per drawing), garment locker1000mmlx450mmdx2100mmh, made of ss 304, thickness of sheet is 1.2 mm and finish is matt. total 9nos. of lockers of equal size is required with provision of lock., shoe rack 1200mmlx300mmdx600mmh - two tier ss 304 shoe rack. made of 30mmx30mmx1.2mm pipe., hardware fittingsa) hinges :- hettich/haffele/godrej.b) handle :- ss304 matt finish d handle / aluminium flush handle.c) screw :- all s.s. 304 visible screws.d) lock :- hafele / hettich / godrej make with pair of keys. e) drawer channel :- hettich / ebco / haffele make telescopic drawer slides 45kgs

Central Government / Public Sector

CTN :40366187

16 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of thermoplastic polyurethane spring pad (happy pad) for trimount bogie to rdso drg.no .skvl-323 alt-1 and specn.no.mp.0.40.99.01 rev.03 aug 2017 or latest. [ warranty period: 30 mont hs after the date of delivery ]

Central Government / Public Sector

CTN :40385513

11 Jun, 2025 NA

Kazipet - Telangana

Tender For supply of set of thermoplastic polyurethane spring pads for secondary spring of 3- phase locos as per ref.no.1 & 2 of s.c rly drng no. c/els/lgd/bogie /3/140.alt-1 or latest consisting of 02 items as follows: 1). thermoplastic polyureth ane spring pads for secondary spring of 3- phase locos as per ref.no.01 -- 01 no./set. 2).thermoplastic polyurethane spr ing pads for secondary spring of 3-phase locos as per ref.no.2 --01 no./set. [ warranty period: 30 months after the da te of delivery ]

Central Government And Public Sector

CTN :40315116

05 Jun, 2025 NA

Cuttack - Odisha

Tender For supply of dpo raw material - epoxy resin , fiber glass thin mat , pvc sheet , pigment colour cinnamon , pu rigid foam block 200 kg , pu rigid foam block 410 kg , tracing paper , thermos paper multi color , co polymer polypropylene sheet 3mm , co polymer polypropylene sheet 4 mm milky , co polymer polypropylene sheet 4mm chinamon , co polymer polypropylene sheet 6mm milky , co polymer polypropylene sheet 10 mm milky , co polymer polypropylene sheet 12 mm milky , co polymer polypropylene sheet 16 mm milky , polyethilin 4mm milky white , polyethilin 8mm milky white , ethaflex sheet 4 mm chinamon 175 kg , ethaflex sheet 4mm thick chinamon 80 kg , ethaflex sheet 6mm thick , ethaflex sheet 12 mm thick , ethaflex sheet 12mm thick black colour , ethaflex sheet 2mm thick cinamon colour , ethaflex sheet 3mm thick cinamon colour , plastazote 16 mm cinamon colour , plastazote 08 mm cinamon colour , pelite 08 mm cinamon colour , pelite 12 mm cinamon colour , corck sheet 7mm thick , orfit easy fit , low temperature thermoplastic sheet 3mm thick , velcro hook with loop colour black 25 mm , velcro hook with loop colour black 50 mm , velcro hook with loop skin colour 25 mm , velcro hook with loop skin colour 50 mm , self adhesive velcro hook and loop 25 mm , self adhesive velcro hook and loop skin color 50 mm , elastic webbing 25 mm , elastic webbing 50 mm , spica elastic 50 mm width skin colour , nylon webbing 25 mm width body colour , nylon webbing 50 mm width body colour , cloth skin colour , canvas belt , bees wax , aluminum tube 15mm od and 11mm id , aluminum stud , threaded stud , aluminum rivet 4 mm , copper washer 3mm with hole , copper washer 4mm with hole , french chuck powder , mobil oil , patten paper , rubber sleeve for cone sander , sewing machine oil , rubber sole , mcr sheet 12mm thick , mcr sheet 8mm thick , mcr sheet 3mm thick , eyelet medium , panel pin , shoe lace , shoe brush , shoe polish black cherry , sole polish black liquid , d ring 12mm plastic , d ring 25mm plastic , d ring 50 mm plastic , buckle roller 25mm , buckle flat 25mm , modi thread 8 cord , cone sander fine , cone sander , drum cone sander for otto bock router , cone sander cylindrical , cone sander coarse , cling film , carbon fiber , teflon sheet , rasp graining head 36 x l 40 , rasp graining head 50 x l 60 , rasp graining head 25 x l 82 , sending drum l200 mm , sending slip , alginatte , stone plaster , stockinet nylon 30mm , stockinet nylon 60mm , stockinet nylon 80mm , stockinet nylon 100mm , convent shoe v , sandal child size vii , knee cap tt elastic small , knee cap tt elastic medium , colour socks tt free size , colour socks tf free size , stump socks , dacron felt , dog hook , wire mesh ms , wire mesh brass , copper tube 5mm dia

CTN :40220147

30 Jun, 2025 NA

Durgapur - West Bengal

Tender For supply of thermoplastic polyurethane spring pads (happy pads) for coil spring for w dg4 locos, as per drg: sk.vl-281,alt-1 spec.no.mp.0.40.99.01,rev-03 august 2017. [ warrant y period: 30 months after the date of delivery ]

Thermoplastic Polyurethane Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government And Public Sector