Latest throttle bush Tenders | Government throttle bush Tenders

Central Government/Public Sector

CTN :45591647

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, drake beam and truss bar, nut- bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate, bottom plate, sbs plate, anchor plate. hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw cupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly, main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, sielent block yoke pin support plate, lashing chain, buckle, roller backing ring, spacer, distance ring, cone assly and other parts of ctrb wire supporting hook, protecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, front and back cover of door cylinder clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod.coupler rod, cbc rear plate, roller, cone, backing ring, spacer, distence ringsmall cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis). as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45591672

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous cast steel consisting of buffer, buffer socket,buffer plunger, axle box housing,axle cover, coupler body & its loos-parts, knucle, pivot top & bottom, wind & narrow-jaw adopter, rear & inner cover, anti roll-bar with c.i.,screw coupling, pin, various types of shaft with or w/o bearing, bearing coller & cone, roller - cartridge bearing, supporting, device, spring- leaf, small lever & pull-rod, hanger bracket, control arm link, anchrage lock, roller/balls of bearing, motor suspension - unit tube, cuppler - body with balancing draft wear pad, gear off shorts cut pcs of wheel disc, tyre & axle, lower- spring beam arrangement seat,buffer complet, m.s. chain, break shoe head,machine hook,guide-rod , impeler track machine parts,ingot,iron block, & other varrious items fit for cast steel release from loco,carriage, sig, electric, trd, tmc, of sort & sizes with attachment of steel, c.i. & neg. non ferrous. if any. note :- 1. loading by purchaser. 2. cutting not allowed. 3. delivery not allowed against part payment. location :- lying in bin no. 06 near line no. -10

Central Government/Public Sector

CTN :45527025

22 Jun, 2026 NA

Raigad - Maharashtra

Tender For tender for supply of drive collar sith screws , packing floating 7 , assembly mech seal 1-18 , seal ring stationary 4 , packing float m/seal 5 , ring-o 82.14x3.53 2 , ring-o gland cover 13 , ring-o 69.44x3.53 1 , sleeve mech seal drg r3a c622/a/r2 10 , seal ring rotary 3 , springs mech seal 5 , throat bush mech.seal 6 , compression unit mech seal p-4 a/b , coller drive for m/seal , ring-0 for st.seal ring 3 , ring-0 rotating ring d , gland 4 , gasket gland ptfe 5 , ring-o for sleeve 9 , ring mating stationary 2 , ring rotating carbon 1b , sleeve modified for p-4 , seal mechanical (epil) , comp. unit (eagle) , sleeve shaft (eagle) , seal ring (eagle) , ring mating (eagle) , ring o mating ring , adapter and v pkg. , gland gasket (eagle) , seal mech.sealol pp side , seal mech.sealol g/b side , bush throttle 6 , gkt mech seal cover 5 , gasket sleeve 9 , ring o for mating ring type 504.5(-30) , wedge for seal ring g , ring seal rotating 1b for p-16 a/b , ring mating ceramic 2 , rotating head assembly 1 , sleeve mech seal p-16 a/b 8 , throttle bush 6 , compression unit p-18a/b , gasket shaft sleeve 9 , ring o for mating ring type 504.5(-28) , wedge for seal ring e , ring seal carbon 1b seal typ-504.5(-28) , ring mating t/carbide 2 , sleeve shaft 8 for p-18 a/b , gasket seal cover 5 , p30 complete mechanical seal assembly , shaftsleeve 13 with scrw , seal ring comp. 1a. , v-packing ptfe 1b. , mating ring 2. , mating ring packing 3. , o-ring 5. , o-ring for sleeve 14. , o-ring for sleeve 14 , p-8 sleeve gasket part no.13 , p-10 pumps o-ring kit p.no. 936 , p-10 pumps o-ring p.no. 936b , p-10 pumps o-ring p.no. 936a , sleeve slinger m/seal 9ep , seal ring assembly for p-35 , seal ring composite for p-35 , spring for p-35 , gland for p-35 , o-ring for seal ring p-35 , soc. set screw for p-35 , spring sleeve for p-35 , mating ring for p-35 , o-ring mating for p-35 , gasket for p-35 , t. bush for p-35 , c sunk screw for p-35 , sleeve for p-35 , packing for p-35 , seal face for new hydrolyzer feed pump ( , o-ring for new hydrolyzer feed pump(p-14 , thrust ring for new hydrolyzer feed pump , spring for new hydrolyzer feed pump(p-14 , drive collar for new hydrolyzer feed pum , set screw for new hydrolyzer feed pump ( , seat (carbon) for new hydrolyzer feed pu , o-ring for new hydrolyzer feed pump(p-14 , gland for new hydrolyzer feed pump (p-14 , gasket for new hydrolyzer feed pump(p-14 , leeve for new hydrolyzer feed pump(p-14 , o-ring for new hydrolyzer feed pump(p-14 , o-ring for new hydrolyzer feed pump(p-14 , throttle bush for new hydrolyzer feed pu , assembly fixture for new hydrolyzer feed , hex screw for new hydrolyzer feed pump ( , clamp ring for new hydrolyzer feed pump , set screw for new hydrolyzer feed pump ( , set screw for new hydrolyzer feed pump ( , plug for new hydrolyzer feed pump (p-14) , stub sleeve for new hydrolyzer feed pump , gasket for new hydrolyzer feed pump(p-14

Central Government And Public Sector

CTN :45566437

26 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of shaft cpk p35-80 s heavy duty of primary water pump part no 210 , bearing bracket p35-80 s heavy duty of primary water pump part no 330 , bearing bracket cpk-kwp p35 80 normal of primary water pump part no 330 , neck ring size p35 -80of primary water pump part no 457 , throttle bush size 41.8 - 49 dia x 10of primary water pump part no - 542 , thrower size - p35-80 s rpk of primary water pump part no 507 , circlip size 80 x 2 5of primary water pump part no 932 , const levl oiler size r1-4of primary water pump part no 638 moc - al-glass , mechanical seal part no 433 of cpk cm 65- 250 pump , shaft seal ring size a35-52 x 7of primary water pump part no 421 , shaft seal ring size a32-47 x 7of primary water pump part no 421 , set of gasket and o rings of cpk cm 65-250 pump , set of fastners of cpk cm 65-250 pump

CTN :45515797

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned 11 nos wagon sl no. [1] special repair bcnm1 30069131797, [2] special repair bcnm1 30069160773, [3] er bcnm1 30029160300, [4] er bcnm1 30029160065, [5] ser bcnm1 30079160565, [6] ser bcnm1 30079168493, [7] ser bcnm1 30079161289, [8] wr boxnr 25089600651, [9] cr boxnr 25019660441, [10] er bobrnm1 72029561992, [11] er bcnm1 30029124524. total qty- 11 nos. excluded items of each wagons sl no- 1 to 10 are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie - 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos , 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos. (nb- apm not included as a excluded item as this item is not fitted in the aforesaid wagon and 02 nos hand break wheel deficient of the wagon sl no. 8 & 9). excluded items of wagon sl no- 11 (er-30029124524) are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) brake cylinder- 01 no, 4) draft gear- 02 nos , 5) coupler body- 02 nos, 6) yoke-02 nos, 7) yoke pin- 02 nos, 8) yoke supporting plate- 02 nos, 9) yoke pin support plate- 02 nos, 10) all sorts of bolster springs, 11) distributor valve (ci)- 01 no, 12) slack adjuster- 01 no, 13) knuckle- 02 nos, 14) anchor plate with safety plate- 02 nos. (nb- apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). nb: bogie (02 nos) not included in the excluded items of wagon sl no-11 (er-30029124524) as this wagon is fitted with casnub 22w(m)-bogies with wide horn which are no longer in use in any of the current design wagon vide edme/frt/rly bd's l/no-2018/m(n)/60/4, dated-14/11/2019 & this wagon should be sold & disposed with bogies. the wagons will be sold except excluded items mentioned above as per crse/frt/kkk's l/no. mc/300/pt. xx, dt. 10.04.2024. wagons sl no-1 to 10 to be sold without bogies & wagon sl no-11 to be sold with bogies.

CTN :45515798

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned wagon no. cncr-98259060449, type- bfkhn. qty- 01 no. excluded items of wagon no bfkhn-cncr-98259060449 are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie- 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos, 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) hand brake wheel- 02 nos, 15) knuckle- 02 nos, 16) anchor plate with safety plate- 02 nos, 17) brake beam complete for casnub bogie- 04 nos, 18) equalising lever with bush- 04 nos, 19) bogie brake push rod- 02 nos. (nb- apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). the wagon will be sold except excluded items mentioned above as per crse/kkk's letter no mc/300/pt.xx, dated- 10.04.2024. wagon to be sold without bogies. excluded items as mentioned above are to be returned to the custodian by the purchaser during return over programme.

CTN :45515799

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned wagon no- cr-30018961543, type- bcnm1. qty- 01 no. excluded items of wagon are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) brake cylinder- 01 no, 4) draft gear- 02 nos, 5) coupler body- 02 nos, 6) yoke-02 nos, 7) yoke pin- 02 nos, 8) yoke supporting plate- 02 nos, 9) yoke pin support plate- 02 nos, 10) all sorts of bolster springs, 11) distributor valve- 01 no, 12) slack adjuster- 01 no, 13) hand brake wheel- 02 nos, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos (nb-apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). nb: bogies (02 nos) not included in the excluded items of wagon (cr-30018961543) as this wagon is fitted with casnub 22w(m)-bogies with wide horn which are no longer in use in any of the current design wagon vide edme/frt/rly bd's l/no-2018/m(n)/60/4, dated 14/11/2019 & this wagon should be sold & disposed with bogies. the wagon is to be sold except excluded items vide crse/kkk's l/no. mc/300/pt.xx, dt. 10.04.2024. wagons will be sold with bogies. excluded items as mentioned above are to be returned to the custodian by the purchaser during return over programme.

Central Government/Public Sector

CTN :45466892

16 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 41 )items as given below ,[1] rprg,duct 55.000 to,[2] disman,fab,str 54.000 to,[3] chng,tube of roof 162.000 m,[4] rprg of receiving chute 11.700 to,[5] disman,pipe,manhole 27.000 ea,[6] disman,fab&ern,damaged str 54.000 to,[7] disman,pipe,ms 7.200 to,[8] ern of pipe,ms 7.200 to,[9] rprg of brg housing 68.000 ea,[10] remove & fix cross beam 32.000 le,[11] rprg,car frame 50.000 ea,[12] rprg of platform 14.400 to,[13] ern,bottom stiffeners of ladle 27.000 to,[14] ern,damaged shell of ladle 23.400 to,[15] ern,top shell complete 22.500 to,[16] rprg,trunion of hot metal ladle 11.700 to,[17] rprg,brick retainers in ladle 36.900 to,[18] disman of concrete 32.400 m3,[19] fab,stand,rack,bin&fencing 18.000 to,[20] ern,stand 18.000 to,[21] disman of damaged str 13.500 to,[22] align,cross travel gearbox&mtr 1.000 ea,[23] streng&fixg,side guard plate 9.000 to,[24] disman,co gas pipe 5.000 to,[25] disman,roller,end stopper housing 2.000 to,[26] fitg,trunion by wldg&finishing 4.000 ea,[27] chng,chrgng spout w/bend plate 18.900 to,[28] dism/fab/ere shell of ldl 22.500 mt,[29] dismantl of recup from bottom shell 15.000 mt,[30] rprg,ladle supporting str 11.250 to,[31] rprg,converter shell 27.000 m2,[32] testing of optical fiber cable 4.000 ea,[33] ultrasonic testng, repaired steel ladle 4.000 ea,[34] rprg,pouring out spout shell plate etc 5.400 to,[35] changing nut,bolt&screw f/centrifuge r20 41.000 ea,[36] ern of steel/slag car main beam etc 9.000 to,[37] fitg,trunion by wldg&finishing 12.000 ea,[38] rprg,brg housing 13.000 ea,[39] ern,cage bracket,link etc 11.250 to,[40] repair,str frame 22.000 to,[41] align,g/box mtr&base 10.000 ea

Central Government/Public Sector

CTN :45403240

04 Jun, 2026 NA

Karimnagar - Telangana

Tender For procurement of tdbfp main pump capital item for tmd of ntpc telangana - throttle bush,ksb,chtd 7/6, balance disc seat,ksb,chtd 7/6, bearing shell,135/219x107,ksb,chtd 7/6

Central Government/Public Sector

CTN :45400956

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, drake beam and truss bar, nut- bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate,, bottom plate, sbs plate, anchor plate. hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw cupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly, main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, sielent block yoke pin support plate, lashing chain, buckle, roller backing ring, spacer, distance ring, cone assly and other parts of ctrb wire supporting hook, prptecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, front and back cover of door cylinder clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod.coupler rod, cbc rear plate, roller, cone, backing ring, spacer, distence ringsmall cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis). as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Throttle Bush Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector