Latest throttle bush Tenders | Government throttle bush Tenders

Central Government/Public Sector

CTN :45403240

04 Jun, 2026 NA

Karimnagar - Telangana

Tender For procurement of tdbfp main pump capital item for tmd of ntpc telangana - throttle bush,ksb,chtd 7/6, balance disc seat,ksb,chtd 7/6, bearing shell,135/219x107,ksb,chtd 7/6

CTN :45379400

20 Jun, 2026 NA

Midnapore - West Bengal

Tender For procurement of consumables for oh of u6, 2026 under ahp-mm and tm dept, ktps. - pu tube connector 1/2 1/2" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/2inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector 1/4" to 10 mm npt(m) 1/4" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/4 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector size 10 mm diax3/8in bsp(m) ( push male pu tube connector thread size: 3/8 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube,od-10mm, id-6.5mm pu tube od-10mm,id-6.5mm,wall thickness1.75 mm,temp range-40f to+160f,hardness shorea98,brust pressure(psi)-450, vacuum rating-to 28"hg,working pr.(psi)-150 @70f ( make:-aeroflex/spac pneumatic ), anabond 666 size 310 gm # ( thixotropic silicone sealant in hdpe cartridge (310g) make:-anabond ltd ), bend pipe, 90 deg, 40nbx40nb,ms seamless for wet ash system moc-ms thk-3.7mm as per sch 40 steel pipe ( schedule 40 no negative tolerance in thickness is allowed ), bend,ms,200x200x90 deg ash water line ( seamless, schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend,ms,150x150x90 deg ash water line ( seamless,schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend pipe,90 deg, 50nbx50nb,ms seamless for wet ash system moc:-ms thk-4mm as per sch 40 steel pipe, bend,ms,80x80x90 deg ash water line ( seamless, sch-40 thk-7.0mm no negative tolerance in thickness is allowed ), bend,ms,100x100x90 deg ash water line ( seamless,sch-40 thk-7.5mm no negative tolerance in thickness is allowed ), u-clamp,m16 for 8 in ci pip for ahp bktpp moc: ms; size: 232mm dia,308mm length,75m ( with 02 nos of nuts & 02 nos of washers for each u-clamp ), turn buckle,gi ( with ms mounting bracket type-eye to eye eye hole should be for m20 bolt total length-1350mm thk-20mm square section-50x250mm ), gasket,200nb coupling,neoprene rubber for ash conveying line ( temp withstand capacity-140 deg celcius ), flat gasket,8 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,9 inch,od,11 inch,th.,1/4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,6 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,7 in,od,8-3/4 inch,th.,1/ 4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,10 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,11 in,od,13 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), flat gasket,9 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,10 in,od,12 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), gasket,graphite coated asbestos,10 inch # # for sleeve coupling in vacuum line ( temp withstand capacity-140 deg celcius ), gasket,9 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket,6 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket for esp hopper gate mouth hand hole od-170mm,id-120mm,thk-5mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper chute face od-400mm,id-315mm,thk-3mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper hand hole for actuator sa25e125 od-118mm,id-90mm,thk-9mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper v

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

Central Government And Public Sector

CTN :45246625

28 May, 2026 NA

Multi City - Bihar

Tender For auction sale of depot miscellaneousllaneous scrap - pole pipe and tank scrap & other pvc items. (comprising of damage and broken pvc water tank, safety helmet, h.d.p.e. chute, plastic chair, plastic tea table, multi meter plastic, plastic handle items, spray machine, boom light, led flasher lamp-green, yellow, red, shunt, route, calling on, wheel barrow plastic, b.p instrument, small gallon, t-8 led tube, cartridge, tube light, tubular lamp, water purifier, flipper, g.p.s. recording device with damaged & broken and miscellaneous plastic items etc.) qty.1100.00kgs

CTN :45176756

30 May, 2026 NA

Barmer - Rajasthan

Tender For corrigendum : supply of flowserve sanmar make mechanical seal spares d d - 4r3004jf , bellows assy 2h 160275 bas , silcar rotating face 230350k434375 , gasket flexible graphite 4n12928qf , carbon throat bush 160802bxr4375 , grafoil oswgg6562 k4 , grafoil gskt oswgg7312 x1 , bellow as alloy 4r107014tp , silcar rotating face 230342k432250 , rot face assy 230362k432250 , carbon throat bush 160431bxr2250 , graphoil gasket 4r9595qf , gasket grafoil 77824ppg1950 , gasket grafoil 4r0869qf , seat gasket grafoil 4r0831qf , 316ss graphite gasket oswgg4562 57 , bellow c0094763tp , silicar seal face 230348k433375 , silicon carbide stationary face 23034 , gasket grafoil 4r0876qf , grafoil sleeve gasket 4r10511qf , gasket grafoil 4r9603qf , 316ss gasket grafoil oswgg6187 k9 , seat gasket graphite s 4r0838qf , bellow assy 2h 160854 bas , silcar seal ring 230333k433625 , rot face assy c0095231lo , gasket grafoil 4r0840qf , gasket grafoil 4r6182qf , carbon throat bush 161492bxr3625 , gasket grafoil 4r10335qf , 316 grafoil s wgkt 4r0386jf , gasket grafoils 4r0877qf , 316ss grafoil s wgkt 833573jf , bellow assy 3r31555tp , silcar 230345k433125 , seat gasket bxh 4r9601qf , carbon throat bush c0202660ge , b gasket 4r0874qf , a gasket bxrh3125 4r1127qf , grafoil packing 4r15977qf , thk gasket oswgg5437 ax , 316ss gasket grafoil oswgg5750 j8 , bellow assembly 117323qgq3125 , silcar 230347k433125 , sleeve gasket grafoil 4r4287qf , 316ss gasket grafoil oswgg5718 v3 , sil car 1 seal ring 230354k432750 , qbq silcar stationary face 230361k433000 , carbon rotating seal face 760360y3r2750 , qbq carbon rotating face 760350y3r3000 , ffkm o ring 568252x675 , ffkm o ring 568234x675 , ffkm o ring 568232x675 , carbon gland bushing 4r73655ge , ffkm oring 568235x675 , ffkm oring 568236x676 , ffkm oring 568229x677 , silcar seal face 230373k432625 , qbq carbon rotating face 760368y3r2625 , ffkm oring 568236ad , ffkm oring 568142ad , carbon throttle bush 161951bxr2625 , ffkm oring 568231ad , ffkm oring 568226ad , 316ss gasket grafoil oswgg4562 58 , qbq silcar stationary face 230376k433375 , carbon flange bushing 4n30973ge , viton oring 568253gu , viton oring 568240gu

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

Central Government/Public Sector

CTN :45137557

22 May, 2026 NA

Panipat - Haryana

Tender For supply of spares for sludge well pumps - shaft ss wga203 with specification as per gem atc , bearing bracket with specification as per gem atc , wear plate with specification as per gem atc , shaft sleeve with specification as per gem atc , seal ring wga203 with specification as per gem atc , impeller wga 203 with specification as per gem atc , casing cover with specification as per gem atc , bearing cap outer with specification as per gem atc , bearing cap inner with specification as per gem atc , throttle bush with specification as per gem atc , dismantling sleeve with specification as per gem atc , support sleeve with specification as per gem atc

Central Government / Public Sector

CTN :44933422

12 May, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of shaft p n 210 , impeller rph40 180 b02s p n 230 , cas wear ring a80 90diax12 p n 502.01 , imp wear ring 70 80.2diax12 p n 503 , shaft p n 210 , impeller p n 230 , casing wearing ring p n 502.01 , impeller wearing ring front p n 503.01 , shaft with all keys p n 210 , impeller p n 230 , casing w ring p n 502.01 , imp wear ring cf8m c coated p n 503.01 , labyrinth ring p n in058994 , labyrinth ring p n in058993 , throttle bush p n 542.02 , impeller nut p n 922.01 , set of o ring & gasket p n in112097 , shaft p n 210 , impeller p n 230.01 , casing wearing ring front pn 502.01 , impeller wearing ring front pn 503.01 , shaft pn 210 , impeller full dia pn 230 , casing wearing ring front pn 502.01 , impeller wearing ring front pn 503.01 , bearing guard nde pn 423.01 , bearing guard de pn 423.02 , neck bush p n 542.02 , impeller nut pn 922.01 , gasket for brg. cover pn 400.01 , pump shaft 1.4462 p no 211 , intermediate shaft 898mm 1.4462 p no 212 , drive shaft 1.4462 p no 213 , impeller stage a743 gr. cf3m p no 230 , suction impeller stage p no 231 , bearing isolator p no 423 , segmental ring 30 42diax7 p.n 501 , wearing ring suction p no 502.01 , wearing ring stage p no 502.02 , impeller ring suction p no 503.01 , impeller ring stage p no 503.02 , lock nut p n 920 , lockwasher is 513 p n in005518 , o ring 180x4 p n in009988 , impeller bolt a193 gr b8m p no 901.01

CTN :44918130

08 May, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract with m/s sam turbo for supply of spares - 7md100/250:suc casing, 7md100/250:del casing, 7md100/250:diffuser, 7md100/250:shaft, 7md100/250:impeller, 7md100/250:brg hsg, 7md100/250:brg cover2, 7md100/250:brg cover3, 7md100/250:seal washer set, 7md100/250:o ring set, 7md100/250:felt seal set, 7md100/250:l ring, 7md100/250:stuffing box hsg, 7md100/250:gland, 7md100/250:wear ring, 7md100/250:spacer-7, 7md100/250:spacer-3, 7md100/250:spacer-4, 7md100/250:shaft sleeve-43, 7md100/250:shaft sleeve-6, 7md100/250:sleeve(suc), 7md100/250:sleeve(del), 7md100/250:bal disc, 7md100/250:throttle bush, 7md100/250:tie bolt set, 7md100/250:key(cplg), 7md100/250:key(imp), 7md100/250:key(bal disc), 7md100/250:lock nut & washer set, 7md100/250:cplg set, 7md100/250:balancing drum, 7md100/250:key (balancing drum), 7md100/250:7md100/250:bearing sleeve, 7md100/250:7 md 100/250:bearing housing(, ar 150/500 a:ar150/500 a:bearing bed wit, ar 150/500 a:ar150/500 a:bearing housing, ar 150/500 a:ar150/500 a:pump shaft, ar 150/500 a:ar150/500 a:outer bearing c, ar 150/500 a:ar150/500 a:inner bearing c, ar 150/500 a:gland housing, ar 150/500 a:gland, ar 150/500 a:pressure ring, ar 150/500 a:liquid thrower, ar 150/500 a:shaft sleeve, ar 150/500 a:lantern ring, ar 150/500 a:expeller, ar 150/500 a:wear plate(b.side), ar 150/500 a:impeller with nut, ar 150/500 a:wear plate (s.side), ar 150/500 a:gland ring, ar 150/500 a:bracket side cover, ar 150/500 a:pump pulley, ar 150/500 a:motor pulley, ar150/500:bracket side cover, ar150/500:inner bearing cap for pump, wp 50/320:pump shaft with keys, wp 50/320:impeller with hex nut and wash, wp 50/320:wear ring (casing), wp 50/320:lantern rings, wp 50/320:support foot, wp 50/320:bearing bed, wp 50/320:bearing cap(inner & outer), wp 50/320:gland (for packing), wp 50/320:stud ( gland), wp 50/320:hex nut (gland nut), wp 50/320:gasket set, wp 50/320:wahser set, wp 50/320:oil seal set, wp 50/320:deflector, wp 50/320:breather plug, wp 50/320:hex screw for 37.2, wp 50/320:wahser (impeller nut), wp 50/320:key (impeller), wp 50/320:key (coupling), wp 50/320:love joy coupling rrs 110/140, vo 80/360 + tch + n:bearing housing, vo 80/360 + tch + n:bush bearing (star), vo 80/360 + tch + n:bush bearing (pump), vo 80/360 + tch + n:impeller, vo 80/360 + tch + n:impeller nut, vo 80/360 + tch + n:drive shaft, vo 80/360 + tch + n:pump shaft, vo 80/360 + tch + n:shaft sleeve (p. end, vo 80/360 + tch + n:coupling sleeve set, vo 80/360 + tch + n:star support, vo 80/360 + tch + n:gasket set, vo 80/360 + tch + n:lock nut (shaft), vo 80/360 + tch + n:lock nut (bearing co, vo 80/360 + tch + n:lock washer (shaft), vo 80/360 + tch + n:lock washer (bearing, vo 80/360 + tch + n:deflector, vo 80/360 + tch + n:coupling set, vo 80/360 + tch + n:ratchet pin, vo 80/360 + tch + n:ratchet collar, vo 80/360 + tch + n:bearing collar, vo 80/360 + tch + n:bearing cap, vo 80/360 + tch + n:adjusting screw, vo 80/360 + tch + n:gland, vo 80/360 + tch + n:gland housing, vo 80/360 + tch + n:gland packing, vo 80/360 + tch + n:lantern ring, vo 80/360 + tch + n:gland ring, vo 80/360 + tch + n:shims, vo 80/360 + tch + n:circlip, vo 80/360 + tch + n:drive column pipe, vo 80/360 + tch + n:pump column pipe, vo 80/360 + tch + n:coupling ring, vo 80/360 + tch + n:coupling nut, vo 80/360 + tch + n:stainer, vo 80/360 + tch + n:volute casing, vo 80/360 + tch + n:bush housing, ar150/510:comp assy, ar150/510:brg hsg, ar150/510:end cover, ar150/510:laybrinth p-end, ar150/510:laybrinth d-end, ar150/510:sleeve, ar150/510:gland, ar150/510:wear plate+insert(b.side), ar150/510:wear plate+insert(s.side), ar150/510:expeller housing, ar150/510:bracket side cover, ar150/510:volute casing, ar150/510:expeller, ar150/510:impeller with nut, ar150/510:flange suc.cover, ar150/510:suction cover, ar150/510:shaft, ar150/510:piston ring, ar150/510:key(impeller), ar150/510:key(cplg), ar150/510:lock nut, ar150/510:dome nut, ar150/510:o ring set, ar150/510:pump pul

Central Government/Public Sector

CTN :44907635

09 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : procurement of spares for flowserve make mechanical seals of various hydrocarbon pumps installed in gsu (12,13) and csu plants at ongc uran plant, through oem m/s flowserve sanmar pvt. ltd, - repairing kit consisting of pt no-32, sleeve kit, compression unit, insert, throttle bush, set screws, throttle bush, sleeve

Throttle Bush Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector