Latest titanium rod Tenders | Government titanium rod Tenders

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

CTN :45676498

23 Jul, 2026 8.00 Crore

East Khasi Hills - Meghalaya

Tender For procurement of consumables /instruments /devices /screws, on case to case consignment basis, on rate contract for a period of two years, extendable upto 6 months or till the finalization of the next tender, whichever is later, for department of neurosurgery. - anterior cervical plate and screws, anterior cervical titanium locking plates length 20mm to 65 mm for two and three level fusion, self tapping titanium cancellous locking screws for anterior cervical plates size 12mm to 16mm, width 3.5mm to 4.5 mm, cervical interbody devices (titanium) size: 5mm to 7mm, dorso lumbar pedicle screw system, pedicle screw (titanium) polyaxial and reduction screws length 30mm to 50mm, width 4mm to 6.5mm, titanium rods for pedicle screws length 50 mm to 100mm with increment of 10mm , width- 5.5 mm, locking caps for pedicle screws, lateral mass screws, locking caps and connecting rods all sizes, cervical cages (paramesh and expandable) all sizes, mis pedicle screws system, mis pedicle screws with locking caps length 30mm to 50mm width 4mm to 6.5mm, mis connecting rods length 50 mm to 100mm with increment of 10mm, width- 5.5 mm, lumbar interbody fusion cages (bullet & banana)- titanium 8mm to 12mm, occipital cervical fusion system (plate and screw) all sizes, aneurysm clips (straight/ curved/ fenestrated) size: 5mm to 10mm, titanium cranioplasty mesh size: 15x 15cm, lpn titanium cranioplasty plate and screws, lpn plates -2 hole/ 4 hole, lpn self tapping titanium screws 4mm/ 5mm, consumables for stryker high speed neurosurgery drill, router size: fa1 1.5mm, fa2 2.5mm, fa3 3mm, universal cranial perforator size: 9mm/ 11mm/ 14mm, synthetic fabric patch for dural closure size: 8x10cm, collage dural substitute membrane size: 2.5x2.5cm and 5x5 cm, thrombin hemostatic matrix - 5m and 10ml

CTN :45620992

30 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of electrical work - miniature circuit breaker make: havels/siemens/l&t/bch/schneider, 32 amps, 2 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 32 amps, 3 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 63 amps, 3 pole mcb with metal enclosure, for power load circuits, 415v ac, type c or d tripping, is/iec 60898 standard, overload and short circuit protection., 16 amps, 1 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 20 amps, 1 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., mcb rail 1 meter long., l&t make thermal overload relays (olr), l&t make, thermal overload relay olr: model- mn-5, adjustable 30-50 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 45-75 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 20-33 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 14-23 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1, star delta electronic timer, make : gic or l&t or selec, adjustable time range 0.1-60 sec, multifunction, din-rail mount, 2 no+2 nc, led status indication, wide voltage range 230/420 v ac, 50 hz, iec 60947-5-1 compliant., 2 a. hbc fuse - 415 v. a.c., model: ns2, 32 a. hf fuse - 415 v.a.c., model: hf14x51 sf-90159., 63 a. hf fuse - 415 v.a.c., model: hf14x51 sf-90159., fuse wire 16 a. 100 grams pack, fuse wire 32 a. 100 grams pack, fuse wire 63 a. 100 grams pack, dowel make aluminium lugs: (ring type), 35 sq.mm, 70 sq.mm., 95 sq.mm., 120 sq.mm., 150 sq.mm, dowels make copper lugs: (ring type), 4 sq.mm. - hole dia 5mm, 6 sq.mm. - hole dia 8mm, 10 sq.mm. - hole dia 8mm, 25 sq.mm. - hole dia 10mm, 1.5 sq.mm. u-lug (kompress fork type), high-grade porcelain/ceramic heavy-duty industrial pendant holder suitable for a type of bc (bayonet cap) with pin-type contacts, make: crompton/philips/havells/bajaj, 230v, 100w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and long-lasting performance., 230v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, efficient lighting, and extended service life., 24v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and durable performance, 22 watts, batten type, 4 feet led tube light - make: isi standard, 230 v. ac 50 watts led flood fitting., 230 v. ac 100 watts led flood fitting., 230 v. ac 150 watts led flood fitting., 3/4 inch wide pvc insulation tape, flame-retardant, moisture-resistant, and suitable for electrical insulation-10 mtrs roll, 1-inch wide fiber glass tape, high-temperature resistant, non-conductive & suitable for electrical insulation and cable wrapping- 50 mtrs roll, 250 w, mercury vapour lamp, screw type, clear/coated, 230 v ac, 50 hz, standard base (e27/e40), suitable for outdoor/indoor lighting applications.

Central Government/Public Sector

CTN :44601166

27 Jun, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : tender for supply of osaero job work for manufacturing of 61 parts ref semfg 860 c c - tie rod , bracket , plug , bolt , nut , ring , ending , lug , lug , bush , shaft , rod , fork , bolt , bolt , bush , bush , bush , bell crank , bolt , rod , rod , eye end , plug , flange , flange , body , flange , nipple , end tip , body , flange , pipe connection , body , flange , pipe connection , bush , flange , pipe connection , nipple , chuck , flange , plug , cover , pipe holder , flange , nut , nut , dowel , end piece , ring , nut , nut , coupling , coupling , coupling , coupling , end piece , lock , bush , bracket

CTN :45673524

15 Jul, 2026 63.96 Lacs

Pune - Maharashtra

Tender For supply of gem 11a consumables c c - dura guard perforator 09 mm disposable , dura guard perforator 14 mm disposable , shunt drape adult , absorbable porcine gelatin sponge box of 10 , floseal hemostatic matrix gelatin matrix component thrombin component flowable surgical haemostat 5ml , 8ml surgiflo gelatin haemostatic matrix kit with thrombin 2000iu of lyophilized human thrombin powder for reconstitution , silver glide proseries non stick bipolar electrosurgical forcep with reusable bipolar cable compatible with silver glide forcep size 14 point 5cm batonet 0 point 4mm , silver glide proseries non stick bipolar electrosurgical forcep with reusable bipolar cable compatible with silver glide forcep size 14 point 5cm batonet 1 point 5mm , philadelphia collar assorted size small med large , taylors brace assorted size , 3d printed customised titanium cranial implant niv mfd to 3d incredible , cervical peek cage polyetheretherketone 6 x 11 x 14 mm , cervical peek cage polyetheretherketone 7 x 11 x 14 mm , cervical peek cage polyetheretherketone 8 x 11 x 14 mm , coalition integrated screws cervical spacer 12 x 14 x 6 mm , cervical titanium expandable carpectomy cage with end plate and locking machnism 28 to 36 mm , cervical titanium expandable corpectomy cage with end plate and locking machnism 20 mm , poly axial pedicle screw 4 point 5mm x 35 mm titanium with break off plug with break off plug , poly axial pedicle screw 4 point 5mm x 40 mm titanium with break off plug , poly axial pedicle screw 4 point 5mm x 45 mm titanium with break off plug , poly axial pedicle screw 5 point 5mm x 35 mm titanium with break off plug , poly axial pedicle screw 5 point 5mm x 40 mm titanium with break of plug , poly axial pedicle screw 6 point 5mm x 40 mm titanium with break off plug , poly axial pedicle screw 6 point 5mm x 35 mm titanium with break off plug , pedical screw contoured titanium rods 5 point 5 x 500 mm , expandable transverse cross connector with screws for 5 point 5 mm rod , percutaneus cannulated pedicle mas screw 5 point 5 x 40 mm with break off plug , percutaneus cannulated pedicle mas screw 5 point 5 x 45 mm with break off plug , percutaneus cannulated pedicle mas screw 5 point 5 x 50 mm with break off plug , percutaneus cannulated pedicle mas screw 6 point 5 x 50 mm with break off plug , percutaneus cannulated pedicle mas screw 6 point 5 x 45 mm with break off plug , straight rod 5 point 5 mm length 120 mm for percutaneus screw , bullet tip plif cage 10 x 22 mm , bullet tip plif cage 10 x 26 mm , bullet tip plif cage 8 x 22 mm , titan mini plate 4 hole with gap pack of 5 , self drilling mini screw for cranioplasty 1 point 5 x 5 mm , self drilling mini screw for cranioplasty 1 point 5 x 7 mm , programmable vp shunt , nasal packing pva 8 point 0 cm , cervical disc prosthesis , medicated iodine impregnated incise drape set size 34 x 35 , eeg electrode gold plated for eeg recording , ncv conduction gel nuprep gel eb neuro , holter patches disposable nc 1340 webcardio 3 days shower proof wireless multiday holter patch sp3 , lancet multiple color , insulin pen needle 31g , blood lancet disposable pre sterilized , insulin pump accesseries quick set , insulin pump closed loop with continues monitoring cgm system //bid details 2 / 43 pump closed loop with continues monitoring cgm system

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

corporations/Associations/Others

CTN :45569713

07 Jul, 2026 2.55 Crore

Patan - Gujarat

Tender For maintenance & repairs work of radhanpur branch canal ch 0 km to 11.469 km slice-1 by repairing of lining constructing of dowel etc offtaking from nmc

CTN :45448957

20 Jun, 2026 28.45 Lacs

Pune - Maharashtra

Tender For corrigendum : supply of dura guard perforator 09 mm disposable , dura guard perforator 11 mm disposable , silver glide proseries non stick bipolar electrosurgical forcep with reusable bipolar cable compatible with silver glide forcep size 14 point 5cm batonet 0 point 4mm , silver glide proseries non stick bipolar electrosurgical forcep with reusable bipolar cable compatible with silver glide forcep size 14 point 5cm batonet 1 point 5mm , 3d printed customised titanium cranial implant niv mfd 3d incredible , titan mini plate 4 hole with gap pack of 5 , self drilling mini screw for cranioplasty 1 point 5 x 5 mm , self drilling mini screw for cranioplasty 1 point 5 x 7 mm , cervical peek cage polyetheretherketone 6 x11 x14 mm , cervical peek cage polyetherether ketone 7 x 11 x 14 mm , cervical peek cage poly etheretherketone 8 x 11 x 14 mm , coalition integrated screws cervical spacer 12 x 14 x 6 mm , cervical titanium expandable corpectomy cage with end plate and locking machnism 20 mm , pedical screw contoured titanium rods 5 point 5 x 500 mm , expandable transverse cross connector with screws for 5 point 5 mm rod , straight rod 5 point 5 mm length 120 mm for percutaneus screw , bullet tip plif cage 10 x 22 mm , bullet tip plif cage 10 x 26 mm , bullet tip plif cage 8 x 22 mm , surgicel powder absorbable he ostat 3 point 0 gm per sterile prefilled syringe 5 unit per box laparoscope tip , nasal pack merocel 8cm and 4 cm , external ventricular drain , programmable vp shunt , cervical disc prosthesis , craniofix titanium clamp 11 mm box of 12 , craniofix titanium clamp 20 mm box of 6 , antibiotic impregnated vp shunt , medicated iodine impregnated incise drape set size 34 x 35

CTN :45492856

24 Jun, 2026 NA

Dhar - Madhya Pradesh

Tender For supply of bipolar set , 4.5mm locking cansullous screw , 4.0 mm locking cansullous screw , 3.5 mm locking screw , 2.7mm locking screw , 3.5 mm cortical screw , 4.5 mm cortical screw , 4.0 mm cc screw , 6.0 mm cc screw , 6.4 mm cc screw , 6.5 mm cc screw , 4.0 mm cancullous fully threded , p.f.n neck screw 8.0 mm , p.f.n neck screw 6.2 mm , interlocking bolt 4.9 mm , interlocking bolt 3.9 mm , interlocking bolt 2.9 mm , proximal bolt 8mm , proximal bolt 6mm , tubler plate 1 by3 , lcp recon plate , distal screw , titanium rod , fiber wire double needle , dispencer , ellis plate , jess clamp , mini lcp plate , t.t screw , t.t endo button , malleolar screw , radial 2.5 mm screw , a.o universal clmap , universal rod , external fixator rod , medial screw , lateral screw , threaded k wire 06 , clamp single pin , broad lcp plate , polyglactin 910 yeless needled suture , suture size 6-0 round body needle , eyeless needled suture usp code 2341, size 2-0 , eyeless needled suture usp code 2346, size 1-0 , eyeless needled suture usp code 2347, size 1 , eyeless needled suture usp code 2534, size 1-0 , distal tip closure titanium ligation clip - large size , distal tip closure titanium ligation clip - medium size , distal tip closure titanium ligation clip - small size , hernia flat mesh size 6x6 , oxidized regenerated cellulose 1 in x 2 in 2.5cm x 5.1cm , oxidized regenerated cellulose based topical absorbable hemostat , poliglecaprone 25 undyed 3-0,3 by 8 circle reverse cutting26mm-70cm. , polyester suture no. 5 x 75-55mm hc tc , suture usp,code 2341,size 2-0 , suture usp,code 2345,size 2-0 , sneedled suture usp,code 2304,size 4-0 , needled suture usp,code 2317,size 2-0 , needled suture usp,code 2437,size 3-0 , needled suture usp,code 2303,size 5-0 , needled suture usp,code 2442,size 5-0 , needled suture usp,code 3317,size 5-0 , needled suture usp,code 3318,size 4-0 , needled suture usp,code 3328,size 3-0 , needled suture usp,code 3336,size 2-0 , needled suture usp,code 3347,size 1 , needled suture usp,code 829,size 6-0 , eyeless needled suture usp,code 841,size 2-0 , needled suture usp,code 842,size 1-0 , needled suture usp,code 823,size 6-0 , needled suture usp,code 843,size 1 , needled suture usp,code 849,size 4-0 , needled suture usp,code 870,size 4-0 , needled suture usp,code 881,size 5-0 , needled suture usp,code 882,size 5-0 , needied usp,code 4201,size3by 0 , needied usp,code 4216,size2by0 , needied usp,code 4221,size1by0 , code 4227,size 1, suture length in cm 100cm , code 4237,size3by0, suture length in cm 76cm , code 4259,size1, suture length in cm 76cm , code 4268,size5by0, suture length in cm 76cm , code 213 size 2-0 suture length in 2 x 75cm , code 214 size 1-0 suture length in 2 x 75cm , code 215 size 1-suture length in 2 x 75cm , titanium clip 100 , titanium clip 400 , suture usp,code 849,size 4-0 , eyeless needled suture usp,code 872 size 6-0 suture , eyeless needled suture usp,code 8726,size 6-0 , needled suture usp,code 2079,size 7-0 , eyeless needled suture usp,code 2079 extra large,size 7-0 , eyeless needled suture usp,code 8304 extra large,size 7-0 , eyeless needled suture usp,code 8704 extra large,size 7-0 suture , eyeless needled suture usp,code 8101 extra large,size 8-0 , code 844 extra large,size 2-0 suture , monofilament polypropylene eyeless needled suture usp,code 846 , polypropylene ii 6-0 75cm , polypropylene ii 3-0 90cm , polypropylene ii 4-0 75cm , polypropylene ii 2-0 90 cm , //bid details 2 / 131 pledget , oval 3x6mm firm 10 starnds , ptfe coated cardiac pacing wire , 3-0 60cm -2x12, 17mm 1by2 circle , monofilament ss , 5 2x75cm , 45mm 1 by 2 circle blunt point , monofilament ss 2 5x45cm , 40mm 1 by 2 circle blunt point , monofilament ss 5 4x45cm , 48mm 1 by 2 circle conventional cutting , monofilament ss 6 4x45cm , 48mm 1 by 2 circle conventional cutting , ligation clips medium , surgical suture,,2-0, 17mm, 1 by 2 , suture,polybutylate coated braided polyester,2-0, 26mm, 1 by 2 c , sutures size 6-0 , tit

Titanium Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others